Waya Bakin Karfe Hardness
Takaitaccen Bayani:
| Cikakkun bayanai na taurin bakin karfe waya: |
1) Daraja: ASTM: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 366, 3Lc 321, 410, 420, 430, 430L
DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.5.7 1.4362, 1.4370, 1.4016
2) Standard: GB, SUS, ASTM, AISI, EN, DIN, JIS, BS - Har ila yau, zuwa sauran daidaitattun ka'idoji na duniya.
3) Diamita: 0.01-25mm
4) Surface: haske, girgije, fili, baki
5) Sharadi: waya mai wuya
6) Nau'in: Hydrogen, Sanyi-jawo, Sanyi taken, Annealed
7) Shiryawa: a cikin nada ko a kan spool
Kunshin 1.coil yawanci shine 5,10,15,20,50,150,500KG/nadi.
2.cushe da filastik fim a ciki da saƙa jaka ko kwali a waje.
3.bulk cushe a kan pallet, nannade da filastik fim da ƙulla wayoyi.
4.ko kuma kamar yadda kuke bukata.
| Maki na taurin bakin karfe waya |
| Nau'in AISI | C Max % | Mn Max % | P Max% | S Max% | Si Max% | Cr% | Ni% | Mo% |
| 201 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1 | 16.000-18.00 | 0.5 | - |
| 202 | 0.15 | 7.50-10.00 | 0.06 | 0.03 | 1 | 17.00-19.00 | 3.-0-5.00 | - |
| 204 ku | 0.08 | 6.5-8.5 | 0.06 | 0.03 | 2 | 16.0-17.0 | 1.5-3.0 | - |
| 302 | 0.15 | 2 | 0.045 | 0.03 | 1 | 17.00-19.00 | 8.00-10.00 | - |
| 302HQ/ | 0.03 | 2 | 0.045 | 0.02 | 1 | 17.00-19.00 | 9.00-10.00 | - |
| 304 ku | ||||||||
| 304HC | 0.04 | 0.80-1.70 | 0.04 | 0.015 | 0.3-0.6 | 18-19 | 8.5-9.5 | - |
| 303 | 0.07 | 2 | 0.045 | 0.25 Min | 1 | 17-19 | 8.0-10.0 | 0.6 |
| 304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00-20.00 | 8.0-10.50 | - |
| 304l | 0.03 | 2 | 0.045 | 0.03 | 1 | 18.00-20.00 | 8.00-12.00 | - |
| 310 S | 0.055 | 1.5 | 0.04 | 0.005 | 0.7 | 25.0-28.0 | 19-22 | - |
| 314 | 0.25 | 2 | 0.045 | 0.03 | 1.50-3.00 | 23.00-26.00 | 19.00-22.00 | - |
| 316 | 0.06 | 2 | 0.045 | 0.03 | 1 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 |
| 316l | 0.03 | 2 | 0.045 | 0.03 | 1 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 |
| 316 Ti | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 |
| 347 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.00-19.00 | 9.00-13.00 | - |
| 321 | 0.06 | 2 | 0.045 | 0.01 | .40-.60 | 17-19.00 | 9.4-9.6 | - |
| 308 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17-19 | 9.5-13.0 | - |
| 308l | 0.025 | 1.50/2.00 | 0.025 | 0.02 | 0.5 | 19.0/21.0 | 9.5/11.0 | - |
| 309 | 0.08 | 1.50 / 2.50 | 0.02 | 0.015 | 0.5 | 23.0/25.0 | 20.0/14.0 | - |
| 309l | 0.025 | 1.50 / 2.50 | 0.02 | 0.015 | 0.5 | 23.0/25.0 | 12.0/14.0 | - |
| 316l | 0.02 | 1.50/2.00 | 0.02 | 0.02 | 0.5 | 18.0/20.0 | 12.00-14.00 | 2.00-3.00 |
| 430l | 0.03 | 1 | 0.04 | 0.03 | 1 | 16.00-18.00 | - | |
| 434 | 0.08 | 1 | 0.04 | 0.03 | 1 | 16.00-18.00 | - | 0.90-1.40 |
Aikace-aikace: Bakin Karfe iya yadu amfani ga masana'antu, Constructions, Ado, Life, Medical, Transport, Chemical masana'antu, Solar makamashi, Marine, Aviation, da dai sauransu.
Amfani da samfur: SS spring waya amfani da bazara, dunƙule, igiya, goga, redrew, electro polishing quality, fil, madaidaiciya da kuma yanke sanduna, bakin karfe yanke waya, wagon axle, karfe raga, waya zane, saƙa raga, tiyo, waya igiya , tacewa kayan aiki, karfe strand, lantarki kayan, likita jiyya, sojojin amfani da harsashi, anti=sata na'urorin, aiki kariya, hatsi ƙusa, furniture frame, elongated waya, harshen wuta na kitchenware, da dai sauransu.
Hot Tags: Taurin bakin karfe masana'antun waya, masu kaya, farashin, na siyarwa
