Igwe anaghị agba nchara
Nkọwa dị mkpirikpi:
| Ihe mejupụtara kemịkalụ 304 igwe anaghị agba nchara: |
| Ọkwa | C% | Si% | Mn% | P% | S% | kr% | Ni% | mo% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0,045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | - |
| 304 SS n'ikpere aka n'ibu Njirimara: |
| T*S | Y*S | Isi ike | Ogologo oge | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | - | - | 40 |
| Isi SS Elbow ngwaahịa sitere na sakysteel: |
 igwe anaghị agba nchara ọkpọkọ ikpere |  igwe anaghị agba nchara ọkpọkọ ikpere |  igwe anaghị agba nchara ọkpọkọ ikpere |
| Nkọwa nkeIgwe anaghị agba nchara: |
| Nkọwa ngwaahịa | |||
| Ụdị | Igwe anaghị agba nchara Butt-welding pipe Fitting (ikwere, Tee, Reducer, Cross, Cap, Stub Ends) | ||
| Igwe anaghị agba nchara akpara akpa ọkpọ dabara (ikwere, Tee, Cross, Njikọ, Njikọta, Outlet, Onyeisi, Bushing, Plug, Nipple) | |||
| Nha | Enweghị enweghị nkebi: DN15-DN600(1/2″-24″) | ||
| Welded: DN200-DN2500(8″-100″) | |||
| Ekpudoro: DN8-DN100(1/4″-4″) | |||
| Ọkpụrụkpụ mgbidi | Sch5s-Sch160s XXS | ||
| Ihe onwunwe | 304/L/H, 316/L/H, 321/H, 347/H, 309/S, 310S, 317L, 904L, 2205/S31803 | ||
| Ọkọlọtọ | ASME, MSS, EN, DIN, ISO, JIS, GB, SH, HG, JB, GD | ||
| Asambodo | ASME, ABS, BV, GL, TUV, CCS, TS, ISO | ||
| Atụmatụ | Ngwaahịa anyị bụ corrosion na elu-okpomọkụ na-eguzogide | ||
| Anyị nwekwara ike ịmepụta nkọwa ndị ọzọ dịka ihe ndị ahịa chọrọ | |||
| Ọnụ ahịa kacha mma / Nnyefe ngwa ngwa / Ogo dị elu | |||
| Nkwakọ ngwaahịa | Akpa plywood, akpa osisi fumigated, pallet ma ọ bụ dị ka arịrịọ ndị ahịa si dị | ||
| Nyocha & Nnwale: |
| 1.100% PMI, Spectro Chemical Analysis Test for Raw Material |
| 2.100% Akụkụ & Nleba Ọhụụ |
| 3. Mechanical Properties Test Gụnyere Tension Test,Flaring Test (Maka enweghị nkebi tube/pipe)/ Flange Test (N'ihi Welded Pipe & Tube), Ike Ule, Reverse Flattening Test |
| 4.100% Hydrostatic Test ma ọ bụ 100% Nnwale na-adịghị emebi emebi (ET ma ọ bụ UT) |
| 5.Radiographic Test for Welded Pipe (ga-adị na nkọwapụta, ma ọ bụ a ga-ekwenyere n'etiti onye zụrụ na onye na-ere ahịa) |
| 6.Straightness Test (nhọrọ) |
| 7.Roughness Test (nhọrọ) |
| 8.Intergranular corrosion Test(nhọrọ) |
| 9.Impact Test (nhọrọ) |
| 10. Mkpebi nha nha ọka (nhọrọ) |
| NKWU: Nnwale niile na nsonaazụ nyocha kwesịrị ka egosi ya na akụkọ dịka ọkọlọtọ na nkọwapụta. |
| Igwe anaghị agba nchara ElbNkwakọ ngwaahịa: |
sakysteelIgwe anaghị agba ncharas na-akwakọba na akara dị ka ụkpụrụ na arịrịọ ndị ahịa si dị.A na-akpachapụ anya nke ukwuu iji zere mmebi ọ bụla nke nwere ike ime n'oge nchekwa ma ọ bụ njem.
 Igwe anaghị agba nchara Elbowu |  Igwe anaghị agba nchara Elbowu |  Igwe anaghị agba nchara Elbowu |
