Factory For Framed Sliding Door - Stainless Steel Welding Tig – Saky Steel
Short Description:
Factory For Framed Sliding Door - Stainless Steel Welding Tig – Saky Steel Detail:
Standard: GB, SUS, AWS, JIS, DIN, BS970
Diameter: 0.08-8mm
| stainless steel welding Tig | |||||||||||
| Brand | (mm) Diameter | Shielding Gas | Chemical Composition of Deposited Metal(%) | ||||||||
| C | Si | Mn | P | S | Cr | Ni | Mo | Cu | |||
| ER308 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.08 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 19.5-22.0 | 9.0-11.0 | 0.75 | 0.75 |
| ER308L | 0.6-4.0 | Ar+0.5-2%CO2 | 0.03 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 19.5-22.0 | 9.0-11.0 | 0.75 | 0.75 |
| ER308LSI | 0.6-4.0 | Ar+0.5-2%CO2 | 0.03 | 0.65-1.0 | 1.0-2.5 | 0.03 | 0.03 | 19.5-22.0 | 9.0-11.0 | 0.75 | 0.75 |
| ER309 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.12 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 23.0-25.0 | 12.0-14.0 | 0.75 | 0.75 |
| ER309L | 0.6-4.0 | Ar+0.5-2%CO2 | 0.03 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 23.0-25.0 | 12.0-14.0 | 0.75 | 0.75 |
| ER310 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.08-0.15 | 03-0.65 | 1.0-2.5 | 0.03 | 0.03 | 25.0-28.0 | 20.0-22.5 | 0.75 | 0.75 |
| ER312 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.15 | 0.3-0.62 | 1.0-2.5 | 0.03 | 0.03 | 28.0-32.0 | 8.0-10.5 | 0.75 | 0.75 |
| ER316 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.08 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.75 |
| ER316L | 0.6-4.0 | Ar+0.5-2%CO2 | 0.03 | 0.3-0.65 | 1.0-2.5 | 0.03 | 0.03 | 18.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.75 |
| ER316LSI | 0.6-4.0 | Ar+0.5-2%CO2 | 0.03 | 0.65-1.0 | 1.0-2.5 | 0.03 | 0.03 | 18.0-20.0 | 11.4-14.0 | 2.0-3.0 | 0.75 |
| ER410 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.12 | 0.5 | 0.6 | 0.03 | 0.03 | 11.5-13.5 | 0.6 | 0.75 | 0.75 |
| ER430 | 0.6-4.0 | Ar+0.5-2%CO2 | 0.1 | 0.5 | 0.6 | 0.03 | 0.03 | 15.5-17.0 | 0.6 | 0.75 | 0.75 |
Chemical composition of deposited metal
| C | Si | Mn | Cr | Ni | S | P | Mo | Cu |
| =0.08 | 0.30~0.65 | 1.00~2.50 | 19.00~22.00 | 9.0~11.0 | =0.03 | =0.03 | =0.75 | =0.75 |
Mechanical propeties of deposited metal
| Tensile strength | Specific elongation |
| MPa | % |
| 570~610 | 36~42 |
Stainless steel welding tig:
(1)MIG/MAG automatic Stainless steel welding wire
1)1kg per spool:D100 the outside diameter is 100mm, inside diameter of the spool hole is 15mm, height is 38mm
2)5kg per spool:D200 the outside diameter is 200mm, inside diameter of the spool hole is 54mm, height is 45mm
3)12.5kg per spool and 15kg per spool:D300 the outside diameter is 300mm, inside diameter of the spool hole is 52mm, height is 90mm
(2)TIG stainless steel welding wire
cut length 1000mm, inner packing is 5kg per plastic case, outside packing is wooden case. (packing in drums, 1m/line,5kg/drum,10kg/drum). All spool and drum size are available.
Hot Tags: stainless steel welding tig manufacturers, suppliers, price, for sale
Product detail pictures:
Related Product Guide:
How to Save Time and Cost With a 316 Stainless Steel Bar
Stainless Steel Bar Tops In the Great British Pub
We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Factory For Framed Sliding Door - Stainless Steel Welding Tig – Saky Steel, The product will supply to all over the world, such as: New Zealand, Monaco, Zurich, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
By Cornelia from Swaziland - 2015.11.28 16:25
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Katherine from Madagascar - 2016.09.29 11:19
