DIN 1.2714 L6 Mold Karfe
Takaitaccen Bayani:
1.2714 wani nau'in ƙarfe ne na ƙarfe mai ƙarfe, wanda aka fi sani da ƙarfe L6. Yana da matuƙar tauri, ƙarfin tauri, da kuma juriyar lalacewa, wanda hakan ya sa ya dace da amfani da shi a fannoni daban-daban wajen kera na'urorin ƙarfe masu kama da ƙarfe, na'urorin ƙarfe masu kama da ƙarfe, da sauran kayan aikin da ke fuskantar babban tasiri da lalacewa.
DIN 1.2714 L6 Mold Karfe:
Sandunan ƙarfe da aka yi da ƙarfe 1.2714 galibi ana samar da su a cikin yanayin annealed, wanda ke ba da damar sauƙaƙe injina da kuma maganin zafi daga baya. Ana iya magance su da zafi don cimma matakan tauri da tauri da ake so waɗanda suka dace da aikace-aikacen da aka yi niyya. Kamar sauran ƙarfe na kayan aiki, ƙarfe 1.2714 yana buƙatar ingantaccen maganin zafi don haɓaka aikinsa. Wannan na iya haɗawa da hanyoyin kamar annealing, quenching, da tempering, ya danganta da halayen da ake so. Wannan ƙarfe yawanci yana ɗauke da abubuwa kamar chromium, nickel, da molybdenum, waɗanda ke ba da gudummawa ga halayen injiniyansa. Alamar "1.2714" lambar lambobi ce da ake amfani da ita don gano takamaiman abun da ke ciki da kaddarorin ƙarfe.
Bayani dalla-dalla na DIN 1.2714 Mold Karfe:
| Matsayi | 5CrNiMo (T20103), L6 (T61206), SKT4, 55NiCrMoV7 (1.2714), 55NiCrMoV7 |
| Daidaitacce | GB/T 1299-2000，ASTM A681-08，JIS G4404-2006，EN ISO 4957-1999 |
| saman | Baƙi, An yi masa kauri, an juya |
| Tsawon | Mita 1 zuwa 6 |
| Sarrafawa | An yi masa fenti mai sanyi kuma an goge shi da sanyi, an yi masa fenti mai santsi da kuma goge shi |
| Kayan Danye | POSCO, Baosteel, TISCO, Saky Karfe, Outokumpu |
Daidaiton ƙarfe na L6 Mold:
| Daidaitacce | GB/T 1299-2000 | ASTM A681-08 | JIS G4404-2006 | EN ISO 4957-1999 | ISO 4957:1999 |
| Matsayi | 5CrNiMo (T20103) | L6 (T61206) | SKT4 | 55NiCrMoV7 (1.2714) | 55NiCrMoV7 |
Sinadaran Sinadaran Na L6 Tools Karfe sandunan ƙarfe:
| TSAYA | Matsayi | C | Mn | P | S | Cr | Mo | Ni | V | Si |
| GB/T 1299-2000 | 5CrNiMo (T20103) | 0.50-0.60 | 0.50-0.80 | 0.030 | 0.030 | 0.50-0.80 | 0.15-0.30 | 1.40-1.80 | 0.40 | |
| ASTM A681-08 | L6 (T61206) | 0.65-0.75 | 0.25-0.80 | 0.030 | 0.030 | 0.60-1.20 | 0.50 | 1.25-2.00 | 0.10-0.50 | |
| JIS G4404-2006 | SKT4 | 0.50-0.60 | 0.60-0.90 | 0.030 | 0.020 | 0.80-1.20 | 0.35-0.55 | 1.50-1.80 | 0.05-0.15 | 0.10-0.40 |
| EN ISO 4957-1999 | 55NiCrMoV7 (1.2714) | 0.50-0.60 | 0.60-0.90 | 0.030 | 0.030 | 0.80-1.20 | 0.35-0.55 | 1.50-1.80 | 0.05-0.15 | 0.10-0.40 |
| ISO 4957:1999 | 55NiCrMoV7 | 0.50-0.60 | 0.60-0.90 | 0.030 | 0.030 | 0.80-1.20 | 0.35-0.55 | 1.50-1.80 | 0.05-0.15 | 0.10-0.40 |
1.2714 Ƙarfe na Jiki Properties:
| Sifofin Jiki | Ma'auni | Sarki |
| Yawan yawa | 7.86 g/cm³ | 0.284 lb/in³ |
| Wurin narkewa | 2590°F | 1421°C |
Me Yasa Zabi Mu?
•Za ka iya samun cikakken kayan da ya dace da buƙatunka a mafi ƙarancin farashi.
•Muna kuma bayar da farashin jigilar kaya daga gida zuwa gida, wato Reworks, FOB, CFR, CIF, da kuma jigilar kaya daga gida zuwa gida. Muna ba da shawarar ku yi ciniki da jigilar kaya wanda zai yi muku arha sosai.
•Kayan da muke bayarwa ana iya tantance su gaba ɗaya, tun daga takardar shaidar gwajin kayan aiki zuwa bayanin girma na ƙarshe. (Rahotanni za su nuna idan an buƙata)
•Muna da tabbacin bayar da amsa cikin awanni 24 (yawanci a cikin awa ɗaya)
•Bayar da rahoton SGS TUV.
•Mun sadaukar da kanmu ga abokan cinikinmu. Idan ba zai yiwu mu cika buƙatunku ba bayan mun duba dukkan zaɓuɓɓuka, ba za mu ɓatar da ku ta hanyar yin alkawuran ƙarya waɗanda za su haifar da kyakkyawar alaƙar abokan ciniki ba.
•Bayar da sabis na tsayawa ɗaya.
Shiryawa:
1. Shirya kaya yana da matuƙar muhimmanci musamman a yanayin jigilar kaya zuwa ƙasashen waje inda jigilar kaya ke ratsawa ta hanyoyi daban-daban don isa inda za a kai, don haka muna ba da kulawa ta musamman game da shirya kaya.
2. Saky Steel's suna tattara kayanmu ta hanyoyi da dama bisa ga kayayyakin. Muna tattara kayayyakinmu ta hanyoyi da dama, kamar,
