420 Stainless Steel Flat Bar
Tlhaloso e Khutšoanyane:
Din 1.4034 SS 430 Flat Bars, SS UNS S42000 Flat Bars, Tšepe e sa ruseng 420 Flat Bars, Barekisi ba 420 ba Tšepe e sa ruseng Cold Drawn Stainless Steel Bare ba Chaena.
Tšepe e sa ruseng ea Sehlopha sa 420 ke tšepe e nang le khabone e ngata e nang le bonyane chromium ea 12%. Joalo ka tšepe efe kapa efe e sa ruseng, sehlopha sa 420 le sona se ka thatafatsoa ka kalafo ea mocheso. E fana ka ductility e ntle boemong ba eona bo annealed le thepa e ntle ea ho hanyetsa mafome ha tšepe e bentšitsoe, e thelletsoe holim'a metsi kapa e thatafalitsoe. Sehlopha sena se na le thata e phahameng ka ho fetisisa - 50HRC - har'a mefuta eohle ea tšepe e sa ruseng e nang le 12% chromium.
| 420 Stainless Steel Flat Bar Litlhaloso: |
| Tlhaloso: | A276/484 / DIN 1028 |
| Lintho tse bonahalang: | 304 316 321 904L 410 420 2205 |
| Libara tse chitja tsa tšepe e sa hloekang: | Bophara ba kantle bo pakeng tsa 4mm le 500mm |
| Bophara: | 1mm ho isa ho 500mm |
| Botenya: | 1mm ho isa ho 500mm |
| Mokhoa: | E Chesitsoeng e Chesitsoeng le e Sehiloeng ka Setlolo (HRAP) le e Huloang ka Sehatsetsi le e Thehiloeng ka Sehatsetsi le Khoele e Bakiloeng ka Sehatsetsi |
| Bolelele: | Limithara tse 3 ho isa ho tse 6 / maoto a 12 ho isa ho a 20 |
| Ho tšoaea: | Boholo, Kereiti, Lebitso la Moetsi ho Libara/Likarolo ka 'ngoe |
| Pakete: | Bara e 'ngoe le e 'ngoe ea tšepe e na le singal, 'me tse 'maloa li tla kopanngoa ka mokotla oa ho loha kapa ho latela tlhoko. |
| Tšepe e sa Khaotseng 420 Flat Bars Litekanyo tse Lekanang: |
| TEKANYETSO | JIS | WERKSTOFF NR. | BS | AFNOR | SIS | UNS | AISI |
| SS 420 | SUS 420 | 1.4021 | 420S29 | - | 2303 | S42000 | 420 |
| SS 420Sebopeho sa Lik'hemik'hale tsa Flat Bars (tšepe e saky): |
| Sehlopha | C | Mn | Si | P | S | Cr | Ni | Mo |
| SUS 420 | 0.15 max | 1.0 e phahameng ka ho fetisisa | 1.0 e phahameng ka ho fetisisa | 0.040 max | 0.030 max | 12.0-14.0 | - | - |
| SS 420 Flat Bars Thepa ea mechini (tšepe e saky): |
| Mocheso o Matlafatsang (°C) | Matla a ho Tenyetseha (MPa) | Matla a Tekanyo Bopaki ba 0.2% (MPa) | Ho lelefatsa (% ka 50mm) | Bothata ba Brinell (HB) |
|---|---|---|---|---|
| Annealed * | 655 | 345 | 25 | 241 max |
| 399°F (204°C) | 1600 | 1360 | 12 | 444 |
| 600°F (316°C) | 1580 | 1365 | 14 | 444 |
| 800°F (427°C) | 1620 | 1420 | 10 | 461 |
| 1000°F (538°C) | 1305 | 1095 | 15 | 375 |
| 1099°F (593°C) | 1035 | 810 | 18 | 302 |
| 1202°F (650°C) | 895 | 680 | 20 | 262 |
| * Litšobotsi tsa ho thaepa tse annealed li tloaelehile bakeng sa Boemo ba A ba ASTM A276; boima bo annealed ke boholo bo boletsoeng. | ||||
| Netefatso ea Boleng ea SAKY STEEL (ho kenyeletsoa le e Senyang le e sa Senyeng): |
1. Teko ea Tekanyo ea Pono
2. Ho hlahloba ka mechine joalo ka ho tsitlella, ho lelefatsa le ho fokotsa sebaka.
3. Teko ea Ultrasonic
4. Tlhahlobo ea tlhahlobo ea lik'hemik'hale
5. Teko ea ho thatafala
6. Teko ea tšireletso ea ho phunya likoti
7. Teko ea ho Penetrant
8. Teko ea ho Sila ha li-granular
9. Tlhahlobo ea tšusumetso
10. Teko ea Teko ea Metalography
| Sephutheloana: |
1. Ho paka ho bohlokoa haholo haholo tabeng ea thomello ea machabeng moo thepa e fetang ka har'a liteishene tse fapaneng ho fihla moo e eang teng, kahoo re beha tlhokomelo e khethehileng mabapi le ho paka.
2. Saky Steel e paka thepa ea rona ka litsela tse ngata ho latela lihlahisoa. Re paka lihlahisoa tsa rona ka litsela tse ngata, tse kang,
Likopo:
Lisebelisoa tse hlokang ho hanyetsa mafome ka tekanyo e itekanetseng le thepa e phahameng ea mechini li loketse Alloy 420. Mehlala ea lisebelisoa tse sebelisang Alloy 420 khafetsa li kenyelletsa:
Lisebelisoa tsa ho jela
Mahare a turbine ea mouoane le khase
Lisebelisoa tsa kichine
Liboutu, linate, likurufu
Likarolo tsa pompo le li-valve le li-shaft
Likhapete tsa lere tsa morafo
Lisebelisoa tsa meno le tsa ho buoa
Li-nozzle
Libolo tsa tšepe tse thatafetseng le litulo tsa lipompo tsa seliba sa oli
