316 roestfrij stielen hoekebalke
Koarte beskriuwing:
| Spesifikaasjes fan hoekebalke roestfrij stiel: |
| Standert | ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5, DIN 17440, KS D3706, GB/T 1220 |
| Materiaal | 201, 202, 205, XM-19 ensfh. 301,303,304,304L, 304H, 309S, 310S, 314,316,316L, 316Ti, 317,321,321H, 329,330,348 ensfh. 409, 410, 416, 420, 430, 430F, 431, 440 2205,2507,S31803,2209,630,631,15-5PH,17-4PH,17-7PH,904L,F51,F55,253MA ensfh. |
| Oerflak | Annealed ingelegde, sân blast, helder, hierline, spegel |
| Technology | Hjit rôle, laske, bûge |
| Spesifikaasjes | 20 * 20 * 3 mm -100 * 100 * 10 mm of as fereaske ûngelikense hoeke |
| Tolerânsje | as nedich |
Sakysteel is316 roestfrij stielen hoekefabrikant en leveransiers yn Sina, spesjalisearre yn it ûndersyk, ûntwikkeling en produksje fan 316 roestfrij stiel hoeke;
AISI 316L RVS-stang, SUS316L, S31603, EN1.4404, X2CRNIMO, SS 316L Hoek Korrosjebestindich yn in ferskaat oan marine- en gemyske omjouwings en poerbêste korrosjebestindigens, gewicht kg/m=0.00798×dikte (2breedte - dikte)
| STANDERT | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | - | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| SS 316/316L hoekebalke Gemyske gearstalling en meganyske eigenskippen: |
| Klasse | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 316 | 0.08 maks | 2.0 maks | 1.0 maks | 0.045 maks | 0.030 maks | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
| SS 316L | 0.035 maks | 2.0 maks | 1.0 maks | 0.045 maks | 0.030 maks | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.89 min |
| Dichtheid | Smeltpunt | Treksterkte | Opbringststerkte (0,2% offset) | Ferlinging |
| 8,0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000, MPa – 515 | Psi – 30000, MPa – 205 | 35% |
| RVS hoeke izer maten: |
| Grutte (mm) | Gewicht permeter (kg) | Grutte (mm) | Gewicht permeter (kg) |
| 20 x 20 x 3 | 0.88 | 50 x 50 x 10 | 7.11 |
| 25 x 25 x 3 | 1.12 | 60 x 60 x 5 | 4.58 |
| 25 x 25 x 5 | 1.78 | 60 x 60 x 6 | 5.40 |
| 25 x 25 x 6 | 2.09 | 60 x 60 x 10 | 8.69 |
| 30 x 30 x 3 | 1.35 | 70 x 70 x 6 | 6.35 |
| 30 x 30 x 5 | 2.17 | 70 x 70 x 10 | 10.30 |
| 30 x 30 x 6 | 2.56 | 75 x 75 x 6 | 7.37 |
| 40 x 40 x 3 | 1.83 | 75 x 75 x 10 | 11.95 |
| 40 x 40 x 5 | 2.96 | 80 x 80 x 6 | 7.89 |
| 40 x 40 x 6 | 3.51 | 80 x 80 x 10 | 12.80 |
| 50 x 50 x 3 | 2.30 | 100 x 100 x 6 | 9.20 |
| 50 x 50 x 5 | 3.75 | 100 x 100 x 10 | 15.0 |
| 50 x 50 x 6 | 4.46 |
