Ibha ye-engile yentsimbi engagqwali engama-316
Inkcazo emfutshane:
| Iinkcukacha ze-angle Bar stainless steel: |
| Umgangatho | I-ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5, DIN 17440, KS D3706, GB/T 1220 |
| Izinto eziphathekayo | 201,202,205,XM-19 njl. 301,303,304,304L,304H,309S,310S,314,316,316L,316Ti,317,321,321H,329,330,348 njl. 409,410,416,420,430,430F,431,440 2205,2507,S31803,2209,630,631,15-5PH,17-4PH,17-7PH,904L,F51,F55,253MA njl. |
| Umphezulu | I-Annealed pickled, isanti evuthayo, eqaqambileyo, eneenwele, ,isibuko |
| Ubuchwepheshe | I-Hot Rolled, Welded, Goba |
| Iinkcukacha | 20*20*3mm -100*100*10mm okanye njengoko kufuneka i-engile engalinganiyo |
| Ukunyamezelana | njengoko kufuneka |
I-Sakysteel yiI-engile yentsimbi engagqwaliyo engama-316umenzi kunye nababoneleli eTshayina, abakhethekileyo kuphando, uphuhliso kunye nokuveliswa kwe-angle yentsimbi engagqwali engama-316;
I-AISI 316L Stainless bar, SUS316L, S31603, EN1.4404, X2CRNIMO, SS 316L I-Angle Resistant Corrosion kwiindawo ezahlukeneyo zaselwandle nakwiikhemikhali kwaye inokumelana nokugqwala okugqwesileyo, ubunzima kg/m=0.00798×ubukhulu(2width – ubukhulu)
| UMGANGATHO | I-WERKSTOFF NR. | I-UNS | I-JIS | BS | I-GOST | I-AFNOR | EN |
| I-SS 316 | 1.4401 / 1.4436 | S31600 | I-SUS 316 | 316S31 / 316S33 | - | I-Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| I-SS 316L | 1.4404 / 1.4435 | S31603 | I-SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| Ibha ye-angle ye-SS 316/316L Ulwakhiwo lweekhemikhali kunye neempawu zoomatshini: |
| Ibanga | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| I-SS 316 | Ubuninzi obuyi-0.08 | Ubuninzi be-2.0 | Ubuninzi be-1.0 | Ubuninzi obuyi-0.045 | Ubuninzi be-0.030 | 16:00 – 18:00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 imizuzu |
| I-SS 316L | Ubuninzi obuyi-0.035 | Ubuninzi be-2.0 | Ubuninzi be-1.0 | Ubuninzi obuyi-0.045 | Ubuninzi be-0.030 | 16:00 – 18:00 | 2.00 – 3.00 | 10.00 – 14.00 | imizuzu engama-68.89 |
| Uxinano | Indawo yokunyibilika | Tensile strength | Amandla okuVuna (0.2%I-Offset) | Ukwandiswa |
| 8.0 g/cm3 | 1400 °C (2550 °F) | I-Psi – 75000 , i-MPa – 515 | I-Psi – 30000 , i-MPa – 205 | 35% |
| Ubungakanani bentsimbi ye-angle yentsimbi engatyiwayo: |
| Ubungakanani (mm) | Ubunzima ngeimitha (Kg) | Ubungakanani (mm) | Ubunzima ngeimitha (Kg) |
| 20 x 20 x 3 | 0.88 | 50 x 50 x 10 | 7.11 |
| 25 x 25 x 3 | 1.12 | 60 x 60 x 5 | 4.58 |
| 25 x 25 x 5 | 1.78 | 60 x 60 x 6 | 5.40 |
| 25 x 25 x 6 | 2.09 | 60 x 60 x 10 | 8.69 |
| 30 x 30 x 3 | 1.35 | 70 x 70 x 6 | 6.35 |
| 30 x 30 x 5 | 2.17 | 70 x 70 x 10 | 10.30 |
| 30 x 30 x 6 | 2.56 | 75 x 75 x 6 | 7.37 |
| 40 x 40 x 3 | 1.83 | 75 x 75 x 10 | 11.95 |
| 40 x 40 x 5 | 2.96 | 80 x 80 x 6 | 7.89 |
| 40 x 40 x 6 | 3.51 | 80 x 80 x 10 | 12.80 |
| 50 x 50 x 3 | 2.30 | 100 x 100 x 6 | 9.20 |
| 50 x 50 x 5 | 3.75 | 100 x 100 x 10 | 15.0 |
| 50 x 50 x 6 | 4.46 |
