Paipa/Ngongo Tapawhā Kowiri tira 316
Whakaahuatanga Poto:
Ngongo Tapawhā Kowiri tira TP316, SUS316, S31600, EN1.4401, X5CRNIMO, SS 316 ātete ki te waikura i roto i ngā momo taiao moana me te matū, ā, he tino pai te ātete ki te waikura, taumaha (Kg/Mita)=0.02513*matotoru(mm)*(OD-matotoru)(mm)
| C% | Si% | Mn% | P% | S% | Cr% | Ni% | N% | Mō% | Ti% |
| 0.08 | 0.75 | 2.0 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | – | 2.0-3.0 | – |
| Ngā Whakatakotoranga o te Paipa Tapawhā Kowiri tira 316: |
| Ingoa | Paipa Tapawhā Kowiri tira 316 Ngongo Tapawhā Kowiri tira | |||||
| Paerewa | GB/T14975, GB/T14976, GB13296-91, GB9948, ASTM A312, ASTM A213, | |||||
| ASTM A269, ASTM A511, JIS349, DIN17456, ASTM A789, ASTM A790, DIN17456, DIN17458, EN10216-5, JIS3459, GOST 9941-81 | ||||||
| Taumata Rauemi | 304, 304L, 316, 316L, 321, 321H, 310S, 347H, 309.317.0cr18N9, 0Cr25Ni20 | |||||
| 00Cr19Ni10,08X18H10T,S31803,S31500,S32750 | ||||||
| Diameter o Waho | 6mm ki te 1219mm | |||||
| Matotoru | 0.8mm – 40mm | |||||
| Rahi | OD (6-1219) mm x (0.9-40)mm x MAX 13000mm | |||||
| Manawanui | i raro i te paerewa ASTM A312 A269 A213 | |||||
| i raro i te paerewa ASTM A312 A269 A213 | ||||||
| i raro i te paerewa ASTM A312 A269 A213 | ||||||
| Mata | 180G, 320G Hāteini / Raina Makawe (Whakaotinga Mā, Paraihe, Whakaotinga Pōuriuri) | |||||
| TE WHAKAPĀKĀ ME TE WHAKAMĀHANA | ||||||
| Tono | Te kawe wai me te hau, te whakapaipai, te hanga, ngā taputapu hauora, te rererangi, | |||||
| te whakawhiti wera o te kohua me ētahi atu mara | ||||||
| Whakamātautau | Whakamātautau Whakapapa, Whakamātautau Waipū, Whakamātautau Waikura Ā-Whānui, Whakamātautau Whakapapa, Whakamātautau Eddy, me ētahi atu | |||||
| Whakaritea | ētahi atu whakaritenga e ai ki ngā whakaritenga a ngā kiritaki | |||||
| Te wā tuku | tae atu ki te rahinga ota | |||||
| Te tākai | He mea here ki te putea kirihou whatu, ki ngā pouaka rakau, ki ngā tono rānei a ngā kiritaki. | |||||
| Āhuatanga Mīhini | Taonga Rauemi | 304 | 304L | 304 | 316L | Hangarau Matua |
| Kaha Kume | 520 | 485 | 520 | 485 | ||
| Te Kaha o te Hua | 205 | 170 | 205 | 170 | ||
| Toronga | 35% | 35% | 35% | 35% | ||
| Te pakeketanga (HV) | <90 | <90 | <90 | <90 | ||
| Ētahi atu taipitopito o te Paipa Tapawhā Kowiri tira: |
| Tau | Te Hanganga Matū (%) | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | |
| 201 | 0.15 | 1.00 | 5.5~7.5 | 0.060 | 0.030 | 3.50~5.50 | 16.00~18.00 | |
| 301 | 0.15 | 1.00 | 2.00 | 0.045 | 0.030 | 6.00~8.00 | 16.00~18.00 | |
| 302 | 0.15 | 1.00 | 2.00 | 0.045 | 0.030 | 8.00~10.00 | 17.00~19.00 | |
| 304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.030 | 8.00~10.50 | 18.00~20.00 | - |
| 304L | 0.030 | 1.00 | 2.00 | 0.045 | 0.030 | 9.00~13.50 | 18.00~20.00 | - |
| 316 | 0.045 | 1.00 | 2.00 | 0.045 | 0.030 | 10.00~14.00 | 10.00~18.00 | 2.00~3.00 |
| 316L | 0.030 | 1.00 | 2.00 | 0.045 | 0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 |
| 430 | 0.12 | 0.75 | 1.00 | 0.040 | 0.030 | 0.60 | 16.00~18.00 | - |
| 430A | 0.06 | 0.50 | 0.50 | 0.030 | 0.50 | 0.25 | 14.00~17.00 | - |
| Rauemi | Kowiri tira Austenite:Rs-2,317L,904L,253Ma(S30815),254SMo(F44/S31254) |
| Kowiri tira ā-rua-wāhanga F51(S31803),F53(S32750),F55(S32760),329(S32900),A4 | |
| Hastelloy C276, Hastelloy C4, Hastelloy C22. Hastelloy B, Hastelloy B-2 | |
| Nitronic50(S20910/XM-19), Nitronic60(S21800/Alloy218), Alloy20Cb-3, Alloy31(N08031/1.4562) | |
| Incoloy825, 309S, Inconel601, A286, Alloy59, 316Ti, SUS347, 17-4PH Nickle201… Ētahi atu. | |
| Monel400, Monel k500, Ninckel200, Nickel201(N02201) | |
| Inconel600(N06600), Inconel601(N06601), Inconel625(N06625/NS336), Inconel718(N07718/GH4169), Inconelx-750(N07750/GH4145) | |
| Incoloy800H(NS112/N08810), Incoloy800HT(N08811), Incoloy800(NS111/N08800), Incoloy825(N08825/NS142), Incoloy901, Incoloy925(N09925), Incoloy926 | |
| 1J50,1J79,3J53,4J29(F15),4J36(Invar36) | |
| GH2132(incoloyA-286/S66286),GH3030,GH3128,BH4145(inconelx-750/N07750),GH4180(N07080/Nimonic80A) | |
| Tohu | JYSS, e ai ki ngā whakaritenga a te kiritaki |
| MOQ | 1pcs i te iti rawa, kia rite ki te rahi me te rauemi |
| Hokonga kotahi-mutu | Ka āwhina mātou i a koe ki te hoko kotahi, ka taea e mātou te hanga i ngā whakapiripiri, ngā hononga me ngā hononga paipa i runga i ēnei rauemi tauhou. |
| Kua whakaaetia te OEM | Āe |
| Tiwhikete whakamātautau mira | Āe |
| Pūrongo tirotiro | Āe |
| Te wā utu | L/CT/T |
| Ngā taipitopito mō te tākai | take wodden rānei kia rite ki te hiahia o te kiritaki |
| Ngā whenua kaweake | Te Hononga o Amerika, Tiamana, Saudi Arabia, Kōrea ki te Tonga, me ētahi atu |
| Rere Whakaputa | Rauemi Mata Te tirotiro i ngā rauemi mata Te tapahi Te whakamahana Te hanga Te tā- |
| Te keri Mīhini Te whakamahana Te maimoatanga Horoi Te whakamātautau kore-whakangaro | |
| Arotakenga hua kua oti |
Ngā Painga:
1. Ko te kete rakau he pakari, he pai hoki mō te kawe moana te tikanga matua mō te tākai i ngā paipa. Ā, ko te tikanga tākai ōhanga pērā i te tākai i roto i ngā paihere e manakohia ana hoki e ētahi kiritaki.
2. Ko te mana whakahaere manawanui e whakamahia ana e mātou ko te D4/T4 (+/-0.1mm) mō te diameter me te matotoru o te pakitara o roto, o waho hoki, he teitei ake i te paerewa o te ao ASTM, DIN.
3. Ko te āhua o te mata tētahi o ā mātou painga matua: kia tutuki ai ngā whakaritenga rerekē mō te āhua o te mata, kei a mātou he mata whakamahana me te pīkara, he mata whakamahana kanapa, he mata oro OD, he mata oro OD me te ID, me ētahi atu.
4. Hei pupuri i te ma o roto o te paipa, kia kore ai e pakaru, ka whakawhanakehia e tā mātou kamupene te hangarau ahurei me te motuhake — te Horoi Hautai me te pēhanga teitei. 8. Kei a mātou te ratonga muri-hoko katoa hei whakatau i ngā raruraru i te wā tika.
