Ang ASTM A269 usa ka standard nga espesipikasyon alang sa seamless ug welded austenitic stainless steel tubing alang sa kinatibuk-ang corrosion-resisting ug ubos- o taas nga temperatura nga mga serbisyo. Ang ASTM A249 usa ka standard nga detalye alang sa welded austenitic steel boiler, superheater, heat-exchanger, ug condenser tubes. Ang ASTM A213 usa ka standard nga detalye alang sa seamless ferritic ug austenitic alloy-steel boiler, superheater, ug heat-exchanger nga mga tubo.
STANDARD ASTMA249 ASTM A269 ASTMA270 ASTM213
| Estandard | Pagkamatugtanon sa Gawas nga Diametro (mm) | Gibag-on sa dingding (%) | Gitas-on pagkamatugtanon (mm) | ||
| ASTM A249 | <25.0 | +0.10 -0.11 | ± 10% | ||
| ≥25.0-≤40.0 | ±0.15 | ||||
| >40.0-<50.0 | ±0.20 | OD<50.8 | +3.0-0.0 | ||
| ≥50.0~<65.0 | ±0.25 | ||||
| ≥65.0-<75.0 | ±0.30 | ||||
| ≥75.0~<100.0 | ±0.38 | OD≥50.8 | +5.0-0.0 | ||
| ≥100~≤200.0 | +0.38 -0.64 | ||||
| >200.0-≤225.0 | +0.38 -1.14 | ||||
| ASTM A269 | <38.1 | ±0.13 | |||
| ≥38.1~<88.9 | ±0.25 | ||||
| ≥88.9-<139.7 | ±0.38 | ±15.0% | OD <38.1 | +3.2-0.0 | |
| ≥139.7~<203.2 | ±0.76 | ±10.0% | 0D ≥38.1 | +4.0-0.0 | |
| ≥203.2-<304.8 | ±1.01 | ||||
| ≥304.8-<355.6 | ±1.26 | ||||
| ASTMA270 | ≤25.4 | ±0.13 | ± 10% | +10-0.0 | |
| >25.4-≤50.8 | ±0.20 | ||||
| >50.8~≤62 | ±0.25 | ||||
| >76.2- ≤101.6 | ±0.38 | ||||
| >101.6~<139.7 | ±0.38 | ||||
| ≥139.7–203.2 | ±0.76 | ||||
| ≥203 2~≤304.8 | ±1.27 | ||||
| ASTM213 | D＜25.4 | ± 0.10 | +20/0 | +3.0/0 | |
| 25.4~38.1 | ±0.15 | ||||
| 38.1~50.8 | ±0.20 | ||||
| 50.8~63.5 | ±0.25 | +22/0 | +5.0/0 | ||
| 63.5~76.2 | ±0.30 | ||||
| 76.2~101.6 | ±0.38 | ||||
| 101.6~190.5 | +0.38/-0.64 | ||||
| 190.5~228.6 | +0.38/-1.14 | ||||
Oras sa pag-post: Hun-27-2023