Wayar Sanyi ta Bakin Karfe
Takaitaccen Bayani:
| Bayani dalla-dalla na Wayar Bakin Karfe Mai Sanyi: |
1. Daidaitacce: ASTM
2. Daraja: AISI304 AISI316 AISI316L AISI302HQ AISI430
3. Nisan diamita: 1.2-20mm
4. Sama: Mai sheƙi/Matte/Acid White/Bright
5. Nau'i: taken sanyi
6. Sana'a: An zana shi da sanyi kuma an rufe shi da annashuwa
7. Kunshin: kamar yadda abokin ciniki ke buƙata.
| Juriyar Diamita da Ovality: |
| Dia (Mm) | Juriya (Mm) | Haske (Mm) |
|---|---|---|
| 0.80-1.90 | +0.00-0.02 | 0.010 |
| 2.00-3.50 | +0.00-0.03 | 0.015 |
| 3.51-8.00 | +0.00-0.04 | 0.020 |
| A cikin na'urori masu kama da na'urori da aka sanya a kan pallets. | ||
| Kayayyakin Inji: |
| Gamawa Mai Rufewa | An Zana Haske | ||||||
|---|---|---|---|---|---|---|---|
| Nau'i | Matsayi | Ƙarfin Tauri N/mm2 (Kgf/mm2) | Tsawaita (%) | Rage ƙimar yanki (%) | Ƙarfin Tauri N/mm2 (Kgf/mm2) | Tsawaita (%) | Rage ƙimar yanki (%) |
| Austenite | AISI 304/316 | 490-740 (60-75) | Sama da 40 | Sama da 70 | 650-800 (66-81) | 25 | 65 |
| AISI 302HQ | 440-90 (45-60) | Sama da 40 | Sama da 70 | 460-640 (47-65) | 25 | 65 | |
| Ferrite | AISI 430 | 40-55 | Sama da 20 | Sama da 65 | 460-640 (47-65) | 10 | 60 |
Karfe mai laushiAna amfani da wayar bakin karfe mai sanyi (CHQ) da sandar waya ta bakin karfe (HRAP) don samar da nau'ikan sassan bakin karfe ta hanyar tsarin "sanyi". Ingancin saman waya mai sanyi mai sanyi ya ƙunshi takamaiman rufin kai don mafi kyawun aiki a samarwa.
Aikace-aikace:Sakysteel cold headed galibin sassan bakin karfe ne kamar: sukurori na bakin karfe, kusoshin bakin karfe, rivets na bakin karfe, kusoshin bakin karfe, fils na bakin karfe da kuma sassa kamar kwallayen bakin karfe, goro na bakin karfe.
