Edelstahl Päifrouer
Kuerz Beschreiwung:
| Spezifikatioune vun Edelstahlpäifen |
| Numm | Edelstahl Päifrouer |
| Standard | ASTM A312 A269 A270 |
| Materialgrad | TP304/304L TP316/316L TP347 TP347H TP321 TP310 TP310S |
| TP410 TP410S TP403 TP420 TP446 | |
| S31803/S32205 S32750 S32760 | |
| Äusseren Duerchmiesser | Nahtlos Päif: 6mm–1219mm |
| Geschweesste Päif: 8mm-1219mm | |
| Déckt | Nahtlos Päif: 0,6 mm - 30 mm |
| Geschweesste Päif: 0,5 mm - 25 mm | |
| Längt | 5,8-6,1 m oder no Ufro vun de Clienten |
| Toleranz | Geméiss dem Standard. |
| Uewerfläch | 180G, 320G, 400G Satin / Hoerlinn |
| 400G, 500G, 600G oder 800G Spigelfinish | |
| Applikatioun | Petrochemesch Industrie, Düngerindustrie, Uelegraffinerieindustrie, Ueleg- a Gasindustrie, Liichtindustrie a Liewensmëttelindustrie, Zellstoff- a Pabeierindustrie, Energie- an Ëmweltindustrie. |
| Test | Squattest, erweiderten Test, Waasserdrocktest, Kristallrottest, Hëtztbehandlung, NDT |
| Grad | Chemesch Zesummesetzung (%) | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | |
| 201 | <0,15 | <1.00 | 5,5~7,5 | <0,060 | <0,030 | 3,50~5,50 | 16.00~18.00 Auer | |
| 301 | <0,15 | <1.00 | <2.00 | <0,045 | <0,030 | 6.00~8.00 Auer | 16.00~18.00 Auer | |
| 302 | <0,15 | <1.00 | <2.00 | <0,045 | <0,030 | 8.00~10.00 Auer | 17.00~19.00 Auer | |
| 304 | <0,08 | <1.00 | <2.00 | <0,045 | <0,030 | 8.00~10.50 | 18.00~20.00 Auer | - |
| 304L | <0,030 | <1.00 | <2.00 | <0,045 | <0,030 | 9.00~13.50 Auer | 18.00~20.00 Auer | - |
| 316 | <0,045 | <1.00 | <2.00 | <0,045 | <0,030 | 10.00~14.00 Auer | 10.00~18.00 Auer | 2.00~3.00 |
| 316L | <0,030 | <1.00 | <2.00 | <0,045 | <0,030 | 12.00~15.00 Auer | 16.00~18.00 Auer | 2.00~3.00 |
| 430 | <0,12 | <0,75 | <1.00 | <0,040 | <0,030 | <0,60 | 16.00~18.00 Auer | - |
| 430A | <0,06 | <0,50 | <0,50 | <0,030 | <0,50 | <0,25 | 14.00~17.00 Auer | - |
| Lëschte vu Standarden | Uwendbar Code Nr. | Stolqualitéit |
| ASTM | A213, A269, A312, A789, A790, B677, A268 | TP304/L/H, TP310/S/H, TP316/L/H/Ti, TP317/L, TP321/H, TP347/H, S31803, S32205, S32750, S32304, S31500, TP904L, TP410, TP430, TP405, TP409/409L |
| ASME | SA213, SA312, SA789, SA790, SB677 | TP304/L/H, TP310/S/H, TP316/L/H/Ti, TP317/L, TP321/H, TP347/H, S31803, S32205, S32750, S32304, S31500, TP904L |
| JIS | JIS G3459, JIS G3463 | SUS 304TB, SUS304HTB, SUS304LTB, SUS310TB, SUS310STB, SUS316TB, SUS316LTB, SUS316TiTB, SUS317TB, SUS317LTB, SUS321TB, SUS321HTB, SUS347TB, SUS347HTB |
| EN & DIN | EN 10216-5, DIN 17456, DIN 17458 | 1,4301, 1,4307, 1,4541, 1,4878, 1,4401, 1,4404, 1,4571, 1,4550, 1,4438, 1,4436, 1,4435, 1,4462, 1,4539, 1,4912, 1,4362 |
| GB&GB/T | G B13296 GB/ T14976 | 0Cr18Ni9,00Cr19Ni10,0Cr18Ni10Ti,0Cr18Ni11Nb,0Cr17Ni12Mo2, 000Cr17Ni14Mo2, 0Cr18Ni12Mo2Ti |
