UNS S31803 F51 Duplex Steel Round Bar
Inkcazelo emfutshane:
| IiNkalo zeNtsimbi yeDuplex ye-UNS S31803 Round Bars: |
| Iinkcukacha | I-ASTM A276, ASME SA276, ASTM A182 F51 |
| Imilinganiselo | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Ubungakanani | 6 mm ukuya kwi-120 mm. |
| Ububanzi | 6mm ukuya 350mm Ububanzi |
| Ukutyeba | 100 ukuya 6000 mm Ubude |
| Ukunyamezelana | +/-0.2mm |
| Gqiba | Mnyama, Ukhazimle ukhazimle, uGuqukile, NO.4 Gqiba, uMat Gqiba, u-BA Gqiba |
| Ubude | I-1 ukuya kwi-6 yeemitha, ubude bokusika ngokweSiko |
| Ifom | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| IBanga le-Duplex Steel UNS S31803 iiBha eziRound: |
| UMGANGATHO | WERKSTOFF NR. | UNS |
| Duplex 31803 | 1.4462 | S31803 |
| Ukwenziwa kweMichiza yeDuplex Steel UNS S31803 Round Bar: |
| IBanga | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| Duplex S31803 | 0.030 ubuninzi | 2 ubuninzi | 1 ubuninzi | 0.030 ubuninzi | 0.020 ubuninzi | 22 – 23 | 3 – 3.5 | 4.50 - 6.50 | 0.14 - 0.20 | 63.72 min |
| Iipropati zoomatshini zeDuplex Steel UNS S31803 iiBha eziRound: |
| Amabanga | Ubuninzi (g/cm 3) | Ubuninzi (lb/in 3) | Indawo yokunyibilika (°C) | Indawo yokunyibilika (°F) |
| S31803 | 7.805 | 0.285 | 1420 - 1465 | 2588-266 |
| Ukupakishwa kweDuplex Steel UNS S31803 Round Bars: |
I-Duplex Steel UNS S31803 iiBhara eziRound kwizicelo:
Iinkampani Zokugrumba i-Oli ngaphandle kwaseShore kuVeliso loMbane wePetrokhemikhali zokuLungiswa kweGesi
IiKhemikhali eziKhethekileyo aMachiza aMayeza Izixhobo zeMichiza.
Ukuba ufuna ukwazi ngakumbi malunga neemveliso zentsimbi ye-duplex, Nceda uqhubeke undwendwelaSasa Alloywebsite, unokufumana ulwazi oluninzi.
