Coil dur di-staen 409L
Disgrifiad Byr:
| Coiliau Dur Di-staen Arddangosfa Gwasanaeth Un Stop: |
| Dalen ddur di-staen 409LCyfansoddiad Cemegol a phriodweddau Mecanyddol: |
| C% | Si% | Mn% | P% | S% | Cr% | Ni% | N% | Mo% | Ti% |
| 0.08 | 0.75 | 2.0 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | – | 2.0-3.0 | – |
| T*S | Y*S | Caledwch | Ymestyn | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | – | – | 40 |
| Disgrifiad o Coil Dur Di-staen AISI 316: |
| Trwch | 0.1 mm-100mm |
| Lled | 1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm |
| Hyd | 2000mm-6000mm neu fel cais cwsmer |
| Safonol | ASME, ASTM, EN, BS, GB, DIN, JIS, ac ati |
| Deunydd | 201, 202, 301, 321, 304, 304L, 316, 316L, 309S, 310S, 410, 430, ac ati |
| Arwyneb | 2B, BA, 8K, Rhif 4 Rhif 1 |
| Melin: | TISCO, LISCO, DUR BAO |
| Pecynnu | Pacio safonol sy'n addas ar gyfer y môr allforio |
| Techneg | Rholio poeth / rholio oer |
| Amser dosbarthu | 10-25 diwrnod |
| Gallu cyflenwi | 700 tunnell fetrig/mis |
| Telerau talu | L/C, T/T |
| Mwy o raddau o Coil Dur Di-staen Inox: |
| Rhif Model | C | Cr | Ni | Mn | P | S | Mo | Si |
| 201 | 0.15 | 16.00-18.00 | 3.50-5.50 | 5.50-7.50 | 0.060 | 0.030 | - | 1.00 |
| 202 | 0.15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | 0.060 | 0.030 | 1.00 | |
| 304 | 0.07 | 17.00-19.00 | 8.00-10.00 | 2.00 | 0.035 | 0.030 | - | 1.00 |
| 304L | 0.030 | 18.00-20.00 | 8.00-10.00 | 2.00 | 0.035 | 0.030 | - | 1.00 |
| 316 | 0.08 | 16.00-18.50 | 10.00-14.00 | 2.00 | 0.035 | 0.030 | 2.00-3.00 | 1.00 |
| 316L | 0.030 | 16.00-18.00 | 12.00-15.00 | 2.00 | 0.035 | 0.030 | 2.00-3.00 | 1.00 |
Cymhwyso coil dur gwrthstaen 316L:
1. Canllaw
2. Caban lifft
3. Maes adeiladu
4. Offer cegin
5. Diwydiant adeiladu llongau
6. Meysydd peiriannau a chaledwedd
7. Diwydiannau milwrol a thrydan
8. Diwydiannau petrolewm a chemegol
9. Diwydiannau prosesu bwyd a meddygol, ac ati
Poeth: coil dur di-staen prime 2b ba 6k 8k hl gorffeniad 201 304 316 409 aisi 316 mewn stoc fawr gweithgynhyrchwyr, cyflenwyr, pris, ar werth
