| Iphepha ledatha leBanga letyhubhu edityanisiweyo yeStainless Structure: |
| IBanga | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | - |
| 304 iipropathi ezijiyileyo zetyhubhu ejiyileyo: |
| T*S | Y*S | Ukuqina | Elongation |
| (Mpa) | (Mpa) | IHRB | HB | (%) |
| 520 | 205 | - | - | 40 |
| Iityhubhu eziphambili ezidityanisiweyo ezingenasici kwi-sakysteel: |
 ityhubhu yentsimbi ejiyileyo | |  ityhubhu yentsimbi ejiyileyo | |  ityhubhu yentsimbi ejiyileyo |
| Iinkcukacha zeumbhobho we-coil wentsimbi: |
| IBanga | I-TP304/304L, 316/316L, 310S, 317L, 321, 347H njl (i-300 series ziyimveliso ephambili, ukuba uneemfuno ezikhethekileyo eziphathekayo, nceda usixelele) |
| Umgangatho | I-ASTM A 213,ASTM A 269,EN10216-5 |
| Ubungakanani | OD: 4.76-25.4mm |
| WT: 0.71-2.11mm |
| Ubude:>1000Meters |
| 4.76*0.71mm/4.76*0.89mm/4.76*1.24mm |
| 6*1mm/6*1.5mm |
| 6.35*0.71mm/6.35*0.89mm/6.35*1.24mm/6.35*1.65mm |
| 7.94*0.71mm/7.94*0.89mm/7.94*1.24mm/7.94*1.65mm |
| 9.53*0.71mm/9.53*0.89mm/9.53*1.24mm/9.43*1.65mm |
| 10*1mm/10*1.5mm |
| 12*1mm/12*1.5mm/12*2mm |
| 12.7*0.71mm/12.7*0.89mm/12.7*1.24mm/12.7*1.65mm/12.7*2.11mm |
| 14*1mm/14*1.5mm/14*2mm |
| 15.88*0.89mm/15.88*1.24mm/15.88*1.65mm/15.88*2.11mm |
| 16*1mm/16*1.5mm/16*2mm |
| 19.05*0.89mm/19.05*1.24mm/19.05*1.65mm/19.05*2.11mm |
| 25.4*0.89mm/25.4*1.24mm/25.4*1.65mm/25.4*2.11mm |
| Umbhobho we-coil wensimbi engenasici | Idayamitha yangaphandle:> 500mm |
| Idayamitha yangaphakathi:<1000mm |
| Ukuphakama kombhobho wekhoyili | 200mm-400mm |
| Ubude bekhoyili nganye | Ubude obuninzi:<1000M |
| Ubude obuncinci: > 6m |
| Ubude bokuhanjiswa ngokubanzi | 200m-800m |
| Iimpawu ezibonakalayo zombhobho we-coil annealed ekhanyayo | A. umlinganiselo wobude ongekho ngaphantsi kwama-55% |
| B. umphezulu ubulukhuni akukho mkhulu 170HV |
| C. amandla okuqina akukho ngaphantsi kwe-550N/MM2 |
| D. isivuno amandla akukho ngaphantsi kwe 220N/MM2 |
| E. i-engile yokugoba>1800;iradiyasi egoba min.<1.5*idayamitha yombhobho |
| Iimpawu ezibonakalayo zombhobho wekhoyili jikelele (ngaphandle kokufakwa okuqaqambileyo) | A. umlinganiselo wobude ongekho ngaphantsi kwe-35% |
| B. ukuqina komphezulu ngaphezu kwe-180HV |
| C. amandla okuqina>600N/MM2 |
| D. amandla isivuno>280N/MM2 |
| E. ukugoba i-engile>900;iradiyasi yokugoba> 2* idayamitha yombhobho |
| Ipropati yokumelana noxinzelelo | Thatha umbhobho we-coil we-8 * 0.5 * c njengomzekelo, uxinzelelo lomsebenzi oluza kuthwalwa ludonga lwangaphakathi alukho ngaphantsi kwe-60BAR |
| Ukupakishwa kwetyhubhu ehlanganisiweyo: |
sakysteel coiled ityhubhu stainless zipakishwe kwaye zibhalwe ngokwemigaqo kunye nezicelo umthengi.Inkathalo enkulu ithathwa ukuthintela nawuphi na umonakalo onokuthi ubangelwe ngenye indlela ngexesha lokugcinwa okanye lokuthuthwa.
 Ukupakishwa kombhobho weCoil yentsimbi engatyiwa | |  Ukupakisha i-Stainless Steel Coil Pipe | |  Ukupakisha i-Stainless Steel Coil Pipe |
Ngaphambili: iStainless Steel Welded imibhobho Okulandelayo: Umtya weNtsimbi engatyiwayo
