Nikkellegeringsgewigrekenaar (Monel, Inconel, Incoloy, Hastelloy) Formule vir berekening van ronde pypgewig
1. Vlekvrye staal ronde pyp
Formule: (buitenste deursnee – wanddikte) × wanddikte (mm) × lengte (m) × 0.02491
Bv.: 114 mm (buitenste deursnee) × 4 mm (wanddikte) × 6 m (lengte)
Berekening: (114-4) × 4 × 6 × 0.02491 = 83.70 (kg)
* Vir 316, 316L, 310S, 309S, ens., koëffisiënt / verhouding = 0.02507
| Graad | koëffisiënt | Graad | koëffisiënt |
| 304 321 Vlekvrye Pyp | 0.02491 | 300-reeks | 0.00623 |
| 316 2520 Vlekvrye Pyp | 0.02507 | GH3030 Staaf | 0.006602 |
| 314 Vlekvrye Pyp | 0.033118 | GH3039 Staaf | 0.006473 |
| C276 HR1230 Hastelloy-pyp | 0.028013 | C276 HR1230 Hastelloy-staaf | 0.006995 |
| Hastelloy-pyp B2 | 0.02937 | Hastelloy-kroeg B2 | 0.007262 |
| Titaniumpyp | 0.0141596 | Titaniumstaaf | 0.0035 |
| Nikkelpyp | 0.027982 | Inconel 600 bar | 0.005524 |
| GH3030 Legeringspyp | 0.02643 | Titaniumplaat | 4.516 |
| GH3039 Legeringspyp | 0.02618 | GH3030/GH3039 Blad | 8.5 |
| 800H Legeringspyp | 0.02543 | Inconel 600 vel | 8.4 |
| Monel 400 Allooipyp | 0.02779 | ||
| 3YC52 Legeringspyp | 0.02455 | ||
| Vlekvrye staalplaat | 7.93 |
2. Ander gewigsberekeningsformule vir vlekvrye staal ronde pype:
Formule: (buitenste deursnee kwadraat – binneste deursnee kwadraat) × lengte (m) × 0.25*π
Bv.: 114 mm (buitenste deursnee) × 4 mm (wanddikte) × 6 m (lengte)
Berekening: (114*114-106*106) × 6 ×0.00793= 83.74 (kg)
* Vir 316, 316L, 310S, 309S, ens., koëffisiënt / verhouding = 0.00793
Twee verskillende berekeningsmetodes kan soortgelyke resultate lewer. Die ooreenstemmende verwysingskoëffisiënte is egter verskillend en moet in gedagte gehou word.
3. Gewig en digtheid van vlekvrye staal 304, 316, 304L en 316L
Die digtheid van vlekvrye staal is ongeveer 7.93 g/cm3 (0.286 lb/in3). Die gewig van vlekvrye staal per kubieke duim is 0.286 pond, per kubieke voet is 495 pond.
| Digtheid van vlekvrye staal | ||||
| Vlekvrye staal | Digtheid (g/cm3), of spesifieke gewig | Digtheid (kg/m3) | Digtheid (lb/in³) | Digtheid (lb/vt³) |
| 304, 304L, 304N | 7.93 | 7930 | 0.286 | 495 |
| 316, 316L, 316N | 8 | 8000 | 0.29 | 499 |
| 201 | 7.8 | 7800 | 0.28 | 487 |
| 202 | 7.8 | 7800 | 0.28 | 487 |
| 205 | 7.8 | 7800 | 0.28 | 487 |
| 301 | 7.93 | 7930 | 0.286 | 495 |
| 302, 302B, 302Cu | 7.93 | 7930 | 0.286 | 495 |
| 303 | 7.93 | 7930 | 0.286 | 495 |
| 305 | 8 | 8000 | 0.29 | 499 |
| 308 | 8 | 8000 | 0.29 | 499 |
| 309 | 7.93 | 7930 | 0.286 | 495 |
| 310 | 7.93 | 7930 | 0.286 | 495 |
| 314 | 7.72 | 7720 | 0.279 | 482 |
| 317, 317L | 8 | 8000 | 0.29 | 499 |
| 321 | 7.93 | 7930 | 0.286 | 495 |
| 329 | 7.8 | 7800 | 0.28 | 487 |
| 330 | 8 | 8000 | 0.29 | 499 |
| 347 | 8 | 8000 | 0.29 | 499 |
| 384 | 8 | 8000 | 0.29 | 499 |
| 403 | 7.7 | 7700 | 0.28 | 481 |
| 405 | 7.7 | 7700 | 0.28 | 481 |
| 409 | 7.8 | 7800 | 0.28 | 487 |
| 410 | 7.7 | 7700 | 0.28 | 481 |
| 414 | 7.8 | 7800 | 0.28 | 487 |
| 416 | 7.7 | 7700 | 0.28 | 481 |
| 420 | 7.7 | 7700 | 0.28 | 481 |
| 422 | 7.8 | 7800 | 0.28 | 487 |
| 429 | 7.8 | 7800 | 0.28 | 487 |
| 430, 430F | 7.7 | 7700 | 0.28 | 481 |
| 431 | 7.7 | 7700 | 0.28 | 481 |
| 434 | 7.8 | 7800 | 0.28 | 487 |
| 436 | 7.8 | 7800 | 0.28 | 487 |
| 439 | 7.7 | 7700 | 0.28 | 481 |
| 440 (440A, 440B, 440C) | 7.7 | 7700 | 0.28 | 481 |
| 444 | 7.8 | 7800 | 0.28 | 487 |
| 446 | 7.6 | 7600 | 0.27 | 474 |
| 501 | 7.7 | 7700 | 0.28 | 481 |
| 502 | 7.8 | 7800 | 0.28 | 487 |
| 904L | 7.9 | 7900 | 0.285 | 493 |
| 2205 | 7.83 | 7830 | 0.283 | 489 |
Plasingstyd: 12 Okt-2022