Pìob Rugaichte Stàilinn gun Mheirg
Tuairisgeul Goirid:
| Pìob rocach stàilinn gun staoin 304: |
| Ìre | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | – |
| T*S | Y*S | Cruas | Leudachadh | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | – | – | 40 |
| Sònrachaidheanpìob corrugated stàilinn gun staoin: |
| A. Tuairisgeul air an toradh | ||||||||||
| Ainm Bathar | pìob rocach stàilinn gun staoin | |||||||||
| Àireamh Nì | PT0101 | |||||||||
| Feartan Bunasach | 1) DN: 12-32MM, Fad: 10-50M. | |||||||||
| 2) Tiughas: 0.2mm-0.25mm | ||||||||||
| 3) Ripple pìoba: corrugation fàinneach eu-domhainn | ||||||||||
| 4) Stuth pìoba: SS304, SS316L. | ||||||||||
| 5) Bruthadh-obrach as àirde: 12 bàr | ||||||||||
| 6) Cnò: Uidheamachadh umha no uidheamachadh stàilinn gun smal | ||||||||||
| Iarrtas | Solar uisge, gas, ola agus leaghan eile. | |||||||||
| Ùine Sampaill | a). 1 latha airson ar stoc sampall ri fhaighinn. b). 3-5 latha airson gnàthaichte. | |||||||||
| tha beatha coileanaidh fhada aige | ||||||||||
| àrd sùbailteachd | ||||||||||
| Tha an còmhdach PE buidhe a’ dèanamh an t-sròin nas tarraingiche agus nas fhasa a nighe | ||||||||||
| earbsach agus sàbhailte | ||||||||||
| C.Sònrachaidhean | ||||||||||
| DN | Meud ID * OD | Tiughas | Stuth | Crith-phìoba | ||||||
| 12mm | ID12 x OD16mm | 0.2 / 0.25mm | SUS304/316L | Tonn fàinneach | ||||||
| 16mm | ID16 x OD20mm | 0.2 / 0.25mm | SUS304/316L | Tonn fàinneach | ||||||
| 20mm | ID20 x OD25mm | 0.2 / 0.25mm | SUS304/316L | Tonn fàinneach | ||||||
| 25mm | ID25 x OD32mm | 0.2 / 0.25mm | SUS304/316L | Tonn fàinneach | ||||||
| 32mm | ID32 x OD42mm | 0.2 / 0.25mm | SUS304/316L | Tonn fàinneach | ||||||
| Trast-thomhas na Pìoba | DN1/2-32 òirleach (DN12-800mm) |
| Stuth Pìoba | SS321, 304, 316, 316L |
| Seòrsa Pìoba | Pìob rocach fàinneach |
| Tiughas na pìoba | 0.28-1.0mm |
| Stuth mogaill braidichte | SS304 |
| Sreath mogaill braidichte | aon shreath no sreathan dùbailte no trì sreathan |
| Bruthadh-obrach as àirde | 10Mpa ~ 35MPa |
| Teòthachd obrach | (-200)~(+800) °C |
| Seòrsa ceangail | Flange, cnothan, uidheamachadh luath, |
| Coitcheann | GB/T14525-2010, ANSI, JIS, DIN, GOST |
| Stuth flange | stàilinn gun smal no nicil alloy |
| Fad co-chruinneachadh pìoba | a rèir riatanasan luchd-dèiligidh |
| CHAN EIL. | DN | ID | OD | Astar na pàirce | Tiughas a’ bhalla | cuideam teòiridheach |
| (kg/m) | ||||||
| 1 | 12 | 11.6 | 18 | 3 | 0.2 | 0.17 |
| 2 | 15 | 14.4 | 21.5 | 3.5 | 0.3 | 0.28 |
| 3 | 18 | 17.4 | 25.5 | 3.5 | 0.3 | 0.34 |
| 4 | 20 | 19.4 | 27 | 4.5 | 0.3 | 0.38 |
| 5 | 25 | 24.4 | 32.5 | 5 | 0.3 | 0.46 |
| 6 | 32 | 31.4 | 40 | 5.5 | 0.3 | 0.6 |
| 7 | 40 | 39.4 | 50 | 6 | 0.3 | 0.75 |
| 8 | 50 | 49.4 | 63 | 7.5 | 0.3 | 0.9 |
| 9 | 65 | 64.4 | 81 | 9 | 0.3 | 1.6 |
| 10 | 80 | 79.2 | 98 | 10.5 | 0.4 | 2 |
| 11 | 100 | 99.2 | 120 | 13 | 0.4 | 2.6 |
| 12 | 125 | 124 | 150 | 14.5 | 0.5 | 3.9 |
| 13 | 150 | 149 | 180 | 17.5 | 0.5 | 4.3 |
| 14 | 200 | 198.8 | 240 | 24 | 0.6 | 6.8 |
| 15 | 250 | 248.4 | 300 | 28 | 0.8 | 11 |
| 16 | 300 | 298 | 355 | 33.5 | 1 | 17.5 |
| 17 | 350 | 348 | 410 | 35 | 1 | 20 |
| 18 | 400 | 397.6 | 460 | 40 | 1.2 | 25 |
| 19 | 450 | 447.6 | 489 | 45 | 1.2 | 29 |
| 20 | 500 | 497.6 | 545 | 45 | 1.2 | 33.5 |
| 21 | 600 | 597.6 | 650 | 50 | 1.2 | 40.5 |
Tagraidhean:
Gnìomhachas iarainn is stàilinn / Ionadan peatrail is gas / Gnìomhachas ceimigeachd / Siostaman teasachaidh is fuarachaidh / Gnìomhachas bìdh / Gnìomhachas chàraichean / Ionadan cinneasachaidh phàipeir / Gnìomhachas mara / Gnìomhachas dìon / Siostaman gluasaid / Seòrsa sam bith de cheanglaichean stòrais is tanca.
Tagaichean teth: luchd-saothrachaidh phìoban rocach stàilinn gun staoin, solaraichean, prìs, ri reic
