Paipa Kowiri tira
Whakaahuatanga Poto:
| Ngongo paipa kowiri tira 304: |
| Tau | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mō% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | – |
| T*S | Y*S | Te pakeketanga | Te whakaroa | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | – | – | 40 |
| Ngā Whakatakotoranga opaipa kowiri tira: |
| Whakaahuatanga o te Hua A. | ||||||||||
| Ingoa Hua | ngongo kowiri tira | |||||||||
| Tau Nama | PT0101 | |||||||||
| Ngā Āhuatanga Taketake | 1) DN: 12-32MM, Roa: 10-50M. | |||||||||
| 2) Matotoru: 0.2mm-0.25mm | ||||||||||
| 3) Ngā ngaru o te ngongo: he kopikopiko porowhita papaku | ||||||||||
| 4) Rauemi ngongo: SS304, SS316L. | ||||||||||
| 5) Te pēhanga mahi mōrahi: 12 pae | ||||||||||
| 6) Nati: He hononga parahi, he hononga kowiri tira rānei | ||||||||||
| Tono | Te wai, te hau, te hinu me ētahi atu wai e tukuna ana. | |||||||||
| Wā Tauira | a). 1 rā mō ā mātou tauira taonga e wātea ana. b). 3-5 ngā rā mō te whakaritenga. | |||||||||
| he roa te ora mahi | ||||||||||
| tino ngāwari | ||||||||||
| mā te paninga PE kōwhai ka ātaahua ake te ngongo, ka ngāwari hoki te horoi | ||||||||||
| pono, haumaru hoki | ||||||||||
| C. Ngā Whakatakotoranga | ||||||||||
| DN | Rahi ID*OD | Matotoru | Rauemi | Ngā ngaru paipa | ||||||
| 12mm | ID12 x OD16mm | 0.2 / 0.25mm | SUS304/316L | Ngaru porowhita | ||||||
| 16mm | ID16 x OD20mm | 0.2 / 0.25mm | SUS304/316L | Ngaru porowhita | ||||||
| 20mm | ID20 x OD25mm | 0.2 / 0.25mm | SUS304/316L | Ngaru porowhita | ||||||
| 25mm | ID25 x OD32mm | 0.2 / 0.25mm | SUS304/316L | Ngaru porowhita | ||||||
| 32mm | ID32 x OD42mm | 0.2 / 0.25mm | SUS304/316L | Ngaru porowhita | ||||||
| Diameter o te Paipa | DN1/2-32inihi (DN12-800mm) |
| Rauemi Paipa | SS321, 304, 316, 316L |
| Momo Paipa | Paipa kōpikopiko porowhita |
| Te matotoru o te paipa | 0.28-1.0mm |
| Rauemi mata whiri | SS304 |
| Paparanga mata whiri | paparanga kotahi, paparanga takirua, paparanga toru rānei |
| Te pēhanga whakakorikori mōrahi | 10Mpa~35MPa |
| Te pāmahana mahi | (-200)~(+800) °c |
| Momo hononga | Flange, nati, hononga tere, |
| Paerewa | GB/T14525-2010, ANSI, JIS, DIN, GOST |
| Rauemi flange | kowiri tira, koranu rānei |
| Te roa o te huihuinga paipa | e ai ki ngā whakaritenga a ngā kiritaki |
| KĀORE. | DN | ID | OD | Te tawhiti o te papa | Te matotoru o te pakitara | taumaha ariā |
| (KG/M) | ||||||
| 1 | 12 | 11.6 | 18 | 3 | 0.2 | 0.17 |
| 2 | 15 | 14.4 | 21.5 | 3.5 | 0.3 | 0.28 |
| 3 | 18 | 17.4 | 25.5 | 3.5 | 0.3 | 0.34 |
| 4 | 20 | 19.4 | 27 | 4.5 | 0.3 | 0.38 |
| 5 | 25 | 24.4 | 32.5 | 5 | 0.3 | 0.46 |
| 6 | 32 | 31.4 | 40 | 5.5 | 0.3 | 0.6 |
| 7 | 40 | 39.4 | 50 | 6 | 0.3 | 0.75 |
| 8 | 50 | 49.4 | 63 | 7.5 | 0.3 | 0.9 |
| 9 | 65 | 64.4 | 81 | 9 | 0.3 | 1.6 |
| 10 | 80 | 79.2 | 98 | 10.5 | 0.4 | 2 |
| 11 | 100 | 99.2 | 120 | 13 | 0.4 | 2.6 |
| 12 | 125 | 124 | 150 | 14.5 | 0.5 | 3.9 |
| 13 | 150 | 149 | 180 | 17.5 | 0.5 | 4.3 |
| 14 | 200 | 198.8 | 240 | 24 | 0.6 | 6.8 |
| 15 | 250 | 248.4 | 300 | 28 | 0.8 | 11 |
| 16 | 300 | 298 | 355 | 33.5 | 1 | 17.5 |
| 17 | 350 | 348 | 410 | 35 | 1 | 20 |
| 18 | 400 | 397.6 | 460 | 40 | 1.2 | 25 |
| 19 | 450 | 447.6 | 489 | 45 | 1.2 | 29 |
| 20 | 500 | 497.6 | 545 | 45 | 1.2 | 33.5 |
| 21 | 600 | 597.6 | 650 | 50 | 1.2 | 40.5 |
Ngā tono:
Ahumahi rino me te maitai/ Ngā tipu hinu me te hau/ Ahumahi matū/ Ngā pūnaha whakamahana me te whakamatao/ Ahumahi kai/ Ahumahi motuka/ Ngā tipu whakaputa pepa/ Ahumahi moana/ Ahumahi parepare/ Ngā pūnaha neke/ Ngā momo hononga tāke me te putunga.
Ngā Tohu Wera: ngā kaihanga paipa kowiri tira, ngā kaiwhakarato, te utu, hei hoko
