Fantsona miolikolika vy tsy misy harafesina
Famaritana fohy:
| Fantsona vy tsy misy harafesina 304 misy tady boribory: |
| kilasy | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | – |
| T*S | Y*S | hamafin'ny | Fanalavana | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | – | – | 40 |
| Fepetra takiana amin'nyfantsona vy tsy misy harafesina: |
| A. Famaritana ny vokatra | ||||||||||
| Anaran'ny vokatra | fantsona vy tsy misy harafesina | |||||||||
| Laharana Entana | PT0101 | |||||||||
| Endri-javatra fototra | 1) DN: 12-32MM, Lava: 10-50M. | |||||||||
| 2) Hatevina: 0.2mm-0.25mm | ||||||||||
| 3) Rivo-dranon'ny fantsona: miolikolika marivo | ||||||||||
| 4) Akora fanamboarana fantsona: SS304, SS316L. | ||||||||||
| 5) Tsindry miasa ambony indrindra: 12 bar | ||||||||||
| 6) Voanjo: Fitaovana varahina na fitaovana vy tsy misy harafesina | ||||||||||
| Fampiharana | Rano, Gaz, Solila ary famatsian-drano hafa. | |||||||||
| Fotoana santionany | a). 1 andro ho an'ny tahiry santionany misy. b). 3-5 andro ho an'ny namboarina. | |||||||||
| manana faharetan'ny fahombiazana lava | ||||||||||
| mora miovaova be | ||||||||||
| Ny sosona PE mavo dia mahatonga ny fantsona ho tsara tarehy kokoa sy mora sasana | ||||||||||
| azo ianteherana sy azo antoka | ||||||||||
| C. Famaritana | ||||||||||
| DN | Haben'ny ID*OD | hateviny | KEVITRA | Rivo-drano | ||||||
| 12mm | ID12 x OD16mm | 0.2 / 0.25mm | SUS304/316L | Onja boribory | ||||||
| 16mm | ID16 x OD20mm | 0.2 / 0.25mm | SUS304/316L | Onja boribory | ||||||
| 20mm | ID20 x OD25mm | 0.2 / 0.25mm | SUS304/316L | Onja boribory | ||||||
| 25mm | ID25 x OD32mm | 0.2 / 0.25mm | SUS304/316L | Onja boribory | ||||||
| 32mm | ID32 x OD42mm | 0.2 / 0.25mm | SUS304/316L | Onja boribory | ||||||
| Diameterin'ny fantsona | DN1/2-32 santimetatra (DN12-800mm) |
| Fitaovana fantsona | SS321, 304, 316, 316L |
| Karazana fantsona | Fantsona boribory boribory |
| hatevin'ny fantsona | 0.28-1.0mm |
| Akora harato randrana | SS304 |
| Sosona harato randrana | sosona tokana na sosona roa na sosona telo |
| Tsindry ambony indrindra amin'ny fiasana | 10Mpa~35MPa |
| Mari-pana miasa | (-200)~(+800) °c |
| Karazana fifandraisana | Flange, voanjo, kojakoja haingana, |
| Malagasy | GB/T14525-2010, ANSI, JIS, DIN, GOST |
| Fitaovana flange | vy tsy misy harafesina na nikela firaka |
| Halavan'ny fivorian'ny fantsona | araka ny takian'ny mpanjifa |
| TSIA. | DN | ID | OD | Halaviran'ny kianja filalaovana | hatevin'ny rindrina | lanja ara-teorika |
| (KG/M) | ||||||
| 1 | 12 | 11.6 | 18 | 3 | 0.2 | 0.17 |
| 2 | 15 | 14.4 | 21.5 | 3.5 | 0.3 | 0.28 |
| 3 | 18 | 17.4 | 25.5 | 3.5 | 0.3 | 0.34 |
| 4 | 20 | 19.4 | 27 | 4.5 | 0.3 | 0.38 |
| 5 | 25 | 24.4 | 32.5 | 5 | 0.3 | 0.46 |
| 6 | 32 | 31.4 | 40 | 5.5 | 0.3 | 0.6 |
| 7 | 40 | 39.4 | 50 | 6 | 0.3 | 0.75 |
| 8 | 50 | 49.4 | 63 | 7.5 | 0.3 | 0.9 |
| 9 | 65 | 64.4 | 81 | 9 | 0.3 | 1.6 |
| 10 | 80 | 79.2 | 98 | 10.5 | 0.4 | 2 |
| 11 | 100 | 99.2 | 120 | 13 | 0.4 | 2.6 |
| 12 | 125 | 124 | 150 | 14.5 | 0.5 | 3.9 |
| 13 | 150 | 149 | 180 | 17.5 | 0.5 | 4.3 |
| 14 | 200 | 198.8 | 240 | 24 | 0.6 | 6.8 |
| 15 | 250 | 248.4 | 300 | 28 | 0.8 | 11 |
| 16 | 300 | 298 | 355 | 33.5 | 1 | 17.5 |
| 17 | 350 | 348 | 410 | 35 | 1 | 20 |
| 18 | 400 | 397.6 | 460 | 40 | 1.2 | 25 |
| 19 | 450 | 447.6 | 489 | 45 | 1.2 | 29 |
| 20 | 500 | 497.6 | 545 | 45 | 1.2 | 33.5 |
| 21 | 600 | 597.6 | 650 | 50 | 1.2 | 40.5 |
Fampiharana:
Indostrian'ny vy sy vy/ Orinasa mpamokatra solika sy entona/ Indostrian'ny simia/ Rafitra fanafanana sy fampangatsiahana/ Indostrian'ny sakafo/ Indostrian'ny fiara/ Orinasa mpamokatra taratasy/ Indostrian'ny ranomasina/ Indostrian'ny fiarovana/ Rafitra famindrana entana/ Karazana fifandraisana amin'ny depot sy tanky rehetra.
Tenifototra mafana: mpanamboatra fantsona vy tsy misy harafesina, mpamatsy, vidiny, amidy
