Tuubbo jiingado ah oo bir ah
Sharaxaad Gaaban:
| Tuubo tuubo oo bir ah oo aan miridh lahayn oo 304 ah: |
| Fasal | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Bisha% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | - |
| T*S | Y*S | Adkaanta | Kordhinta | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | - | - | 40 |
| Tilmaamahatuubo bir ah oo aan miridh lahayn: |
| A. Sharaxaadda Badeecada | ||||||||||
| Magaca Badeecada | Tuubo bir ah oo aan lahayn dahaar | |||||||||
| Lambarka Shayga | PT0101 | |||||||||
| Astaamaha Aasaasiga ah | 1) DN: 12-32MM, Dhererka: 10-50M. | |||||||||
| 2) Dhumuc: 0.2mm-0.25mm | ||||||||||
| 3) Lug-lugeedka tuubada: dahaarka annular-ka ee gacmeed | ||||||||||
| 4) Qalabka tuubada: SS304, SS316L. | ||||||||||
| 5) Cadaadiska ugu badan ee shaqada: 12 bar | ||||||||||
| 6) Lawska: Ku habboon naxaas ama ku habboon bir aan miridh lahayn | ||||||||||
| Codsiga | Biyo, Gaas, Saliid iyo sahay kale oo dareere ah. | |||||||||
| Waqtiga Muunadda | a). 1 maalin oo loogu talagalay kaydka muunadda ee la heli karo. b). 3-5 maalmood oo loogu talagalay in la habeeyo. | |||||||||
| waxay leedahay cimri waxqabad dheer | ||||||||||
| dabacsanaan sare leh | ||||||||||
| dahaarka PE ee jaalaha ah wuxuu tuubada ka dhigayaa mid soo jiidasho leh oo si fudud loo dhaqi karo | ||||||||||
| lagu kalsoonaan karo oo ammaan ah | ||||||||||
| C. Faahfaahinta | ||||||||||
| DN | Cabbirka Aqoonsiga*OD | Dhumucda | Alaab | Cabsi tuubbo | ||||||
| 12mm | ID12 x OD16mm | 0.2 / 0.25mm | SUS304/316L | Hirka wareegsan | ||||||
| 16mm | ID16 x OD20mm | 0.2 / 0.25mm | SUS304/316L | Hirka wareegsan | ||||||
| 20mm | ID20 x OD25mm | 0.2 / 0.25mm | SUS304/316L | Hirka wareegsan | ||||||
| 25mm | ID25 x OD32mm | 0.2 / 0.25mm | SUS304/316L | Hirka wareegsan | ||||||
| 32mm | ID32 x OD42mm | 0.2 / 0.25mm | SUS304/316L | Hirka wareegsan | ||||||
| Dhexroorka Tuubada | DN1/2-32 inji (DN12-800mm) |
| Waxyaabaha Tuubada | SS321, 304, 316, 316L |
| Nooca Tuubada | Tuubo jiingado ah oo wareegsan |
| Dhumucda tuubada | 0.28-1.0mm |
| Shabaq shabaq ah oo tidcan | SS304 |
| Lakab shabaq ah oo tidcan | lakab keliya ama laba lakab ama saddex lakab |
| Cadaadiska ugu badan ee soo kicinta | 10Mpa~35MPa |
| Heerkulka shaqada | (-200)~(+800) °c |
| Nooca isku xirka | Flange, lowska, qalabka degdega ah, |
| Heerka Caadiga ah | GB/T14525-2010, ANSI,JIS,DIN,GOST |
| Qalabka Flange-ka | bir aan daxal lahayn ama nikkel daxal leh |
| Dhererka isku-xidhka tuubooyinka | sida waafaqsan shuruudaha macaamiisha |
| MAYA. | DN | ID | OD | Masaafada garoonka | Dhumucda derbiga | miisaanka aragtiyeed |
| (KG/M) | ||||||
| 1 | 12 | 11.6 | 18 | 3 | 0.2 | 0.17 |
| 2 | 15 | 14.4 | 21.5 | 3.5 | 0.3 | 0.28 |
| 3 | 18 | 17.4 | 25.5 | 3.5 | 0.3 | 0.34 |
| 4 | 20 | 19.4 | 27 | 4.5 | 0.3 | 0.38 |
| 5 | 25 | 24.4 | 32.5 | 5 | 0.3 | 0.46 |
| 6 | 32 | 31.4 | 40 | 5.5 | 0.3 | 0.6 |
| 7 | 40 | 39.4 | 50 | 6 | 0.3 | 0.75 |
| 8 | 50 | 49.4 | 63 | 7.5 | 0.3 | 0.9 |
| 9 | 65 | 64.4 | 81 | 9 | 0.3 | 1.6 |
| 10 | 80 | 79.2 | 98 | 10.5 | 0.4 | 2 |
| 11 | 100 | 99.2 | 120 | 13 | 0.4 | 2.6 |
| 12 | 125 | 124 | 150 | 14.5 | 0.5 | 3.9 |
| 13 | 150 | 149 | 180 | 17.5 | 0.5 | 4.3 |
| 14 | 200 | 198.8 | 240 | 24 | 0.6 | 6.8 |
| 15 | 250 | 248.4 | 300 | 28 | 0.8 | 11 |
| 16 | 300 | 298 | 355 | 33.5 | 1 | 17.5 |
| 17 | 350 | 348 | 410 | 35 | 1 | 20 |
| 18 | 400 | 397.6 | 460 | 40 | 1.2 | 25 |
| 19 | 450 | 447.6 | 489 | 45 | 1.2 | 29 |
| 20 | 500 | 497.6 | 545 | 45 | 1.2 | 33.5 |
| 21 | 600 | 597.6 | 650 | 50 | 1.2 | 40.5 |
Codsiyada:
Warshadaha birta iyo birta/ Warshadaha batroolka iyo gaaska/ Warshadaha kiimikada/ Nidaamyada kuleylinta iyo qaboojinta/ Warshadaha cuntada/ Warshadaha baabuurta/ Warshadaha wax soo saarka waraaqaha/ Warshadaha badda/ Warshadaha difaaca/ Nidaamyada guuritaanka/ Nooc kasta oo isku xirka bakhaarada iyo haamaha.
Calaamadaha Kulul: soosaarayaasha tuubooyinka birta aan daxalka lahayn, alaab-qeybiyeyaasha, qiimaha, iib ah
