Pibell Rhychog Dur Di-staen
Disgrifiad Byr:
| Tiwb pibell rhychog dur di-staen 304: |
| Gradd | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | – |
| T*S | Y*S | Caledwch | Ymestyn | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | – | – | 40 |
| Manylebaupibell rhychog dur di-staen: |
| A. Disgrifiad o'r Cynnyrch | ||||||||||
| Enw'r Cynnyrch | pibell rhychog dur di-staen | |||||||||
| Rhif Eitem | PT0101 | |||||||||
| Nodweddion Sylfaenol | 1) DN: 12-32MM, Hyd: 10-50M. | |||||||||
| 2) Trwch: 0.2mm-0.25mm | ||||||||||
| 3) Crychlyd pibell: rhychog cylchog bas | ||||||||||
| 4) Deunydd pibell: SS304, SS316L. | ||||||||||
| 5) Pwysau gweithio uchaf: 12 bar | ||||||||||
| 6) Cnau: Ffit pres neu ffitio dur di-staen | ||||||||||
| Cais | Cyflenwad dŵr, nwy, olew a hylifau eraill. | |||||||||
| Amser Sampl | a). 1 diwrnod ar gyfer ein stoc sampl sydd ar gael. b). 3-5 diwrnod ar gyfer addasu. | |||||||||
| mae ganddo oes perfformiad hir | ||||||||||
| hyblygrwydd uchel | ||||||||||
| Mae'r gorchudd PE melyn yn gwneud y bibell yn fwy deniadol ac yn hawdd i'w golchi | ||||||||||
| dibynadwy a diogel | ||||||||||
| C.Manylebau | ||||||||||
| DN | Maint ID * OD | Trwch | Deunydd | Crychlyd pibell | ||||||
| 12mm | ID12 x OD16mm | 0.2 / 0.25mm | SUS304/316L | Ton gylchol | ||||||
| 16mm | ID16 x OD20mm | 0.2 / 0.25mm | SUS304/316L | Ton gylchol | ||||||
| 20mm | ID20 x OD25mm | 0.2 / 0.25mm | SUS304/316L | Ton gylchol | ||||||
| 25mm | ID25 x OD32mm | 0.2 / 0.25mm | SUS304/316L | Ton gylchol | ||||||
| 32mm | ID32 x OD42mm | 0.2 / 0.25mm | SUS304/316L | Ton gylchol | ||||||
| Diamedr y bibell | DN1/2-32 modfedd (DN12-800mm) |
| Deunydd Pibell | SS321, 304, 316, 316L |
| Math o Bibell | Pibell rhychiog gylchol |
| Trwch y bibell | 0.28-1.0mm |
| Deunydd rhwyll plethedig | SS304 |
| Haen rhwyll blethedig | haen sengl neu haenau dwbl neu dair haen |
| Pwysedd gweithio uchaf | 10Mpa ~ 35MPa |
| Tymheredd gweithio | (-200)~(+800) °c |
| Math cysylltu | Fflans, cnau, ffitiadau cyflym, |
| Safonol | GB/T14525-2010, ANSI, JIS, DIN, GOST |
| Deunydd fflans | dur di-staen neu aloi nicel |
| Hyd cynulliad pibell | yn ôl gofynion cleientiaid |
| NA. | DN | ID | OD | Pellter y traw | Trwch wal | pwysau damcaniaethol |
| (KG/M) | ||||||
| 1 | 12 | 11.6 | 18 | 3 | 0.2 | 0.17 |
| 2 | 15 | 14.4 | 21.5 | 3.5 | 0.3 | 0.28 |
| 3 | 18 | 17.4 | 25.5 | 3.5 | 0.3 | 0.34 |
| 4 | 20 | 19.4 | 27 | 4.5 | 0.3 | 0.38 |
| 5 | 25 | 24.4 | 32.5 | 5 | 0.3 | 0.46 |
| 6 | 32 | 31.4 | 40 | 5.5 | 0.3 | 0.6 |
| 7 | 40 | 39.4 | 50 | 6 | 0.3 | 0.75 |
| 8 | 50 | 49.4 | 63 | 7.5 | 0.3 | 0.9 |
| 9 | 65 | 64.4 | 81 | 9 | 0.3 | 1.6 |
| 10 | 80 | 79.2 | 98 | 10.5 | 0.4 | 2 |
| 11 | 100 | 99.2 | 120 | 13 | 0.4 | 2.6 |
| 12 | 125 | 124 | 150 | 14.5 | 0.5 | 3.9 |
| 13 | 150 | 149 | 180 | 17.5 | 0.5 | 4.3 |
| 14 | 200 | 198.8 | 240 | 24 | 0.6 | 6.8 |
| 15 | 250 | 248.4 | 300 | 28 | 0.8 | 11 |
| 16 | 300 | 298 | 355 | 33.5 | 1 | 17.5 |
| 17 | 350 | 348 | 410 | 35 | 1 | 20 |
| 18 | 400 | 397.6 | 460 | 40 | 1.2 | 25 |
| 19 | 450 | 447.6 | 489 | 45 | 1.2 | 29 |
| 20 | 500 | 497.6 | 545 | 45 | 1.2 | 33.5 |
| 21 | 600 | 597.6 | 650 | 50 | 1.2 | 40.5 |
Ceisiadau:
Diwydiant haearn a dur / Gweithfeydd petroliwm a nwy / Diwydiant cemeg / Systemau gwresogi ac oeri / Diwydiant bwyd / Diwydiant modurol / Gweithfeydd cynhyrchu papur / Diwydiant morwrol / Diwydiant amddiffyn / Systemau symud / Unrhyw fath o gysylltiadau depo a thanc.
Tagiau Poeth: gweithgynhyrchwyr pibellau rhychog dur di-staen, cyflenwyr, pris, ar werth
