Pipe e Kentsoeng ka Lesenke
Tlhaloso e Khutšoanyane:
| 304 tšepe e sa hloekang phala tube: |
| Kereiti | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Cu% |
| 304 | 0.08 | 1.0 | 2.0 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.0 | - | - |
| T*S | Y*S | Ho thatafala | Elongation | |
| (Mpa) | (Mpa) | HRB | HB | (%) |
| 520 | 205 | - | - | 40 |
| Litlhaloso tsaphala e entsoeng ka tšepe e sa hloekang: |
| A. Tlhaloso ea Sehlahisoa | ||||||||||
| Lebitso la Sehlahiswa | tšepe e entsoeng ka masenke | |||||||||
| Ntho No. | PT0101 | |||||||||
| Lintlha tsa Motheo | 1) DN: 12-32MM, Bolelele: 10-50M. | |||||||||
| 2) Botenya: 0.2mm-0.25mm | ||||||||||
| 3) Hose ripple : corrugation e sa tebang ea annular | ||||||||||
| 4) lisebelisoa tsa Hose: SS304, SS316L. | ||||||||||
| 5) Khatello e phahameng ea ho sebetsa: 12 bar | ||||||||||
| 6) Nut: Ho kenya koporo kapa ho kenya tšepe e sa hloekang | ||||||||||
| Kopo | Metsi, Khase, Oli le phepelo e meng ea metsi. | |||||||||
| Nako ea Mohlala | a). Letsatsi le 1 bakeng sa sampole ea stock e fumanehang. b). matsatsi a 3-5 bakeng sa customized. | |||||||||
| e na le bophelo bo bolelele ba ts'ebetso | ||||||||||
| tenyetsehang e phahameng | ||||||||||
| ho roala PE e mosehla ho etsa hore hose e be e khahlehang le ho bonolo ho e hlatsoa | ||||||||||
| e tšepahalang ebile e bolokehile | ||||||||||
| C. Litlhaloso | ||||||||||
| DN | ID * OD boholo | Botenya | Lintho tse bonahalang | Pipe e lla | ||||||
| 12 limilimithara | ID12 x OD16mm | 0.2 / 0.25mm | SUS304/316L | Leqhubu la annular | ||||||
| 16 limilimithara | ID16 x OD20mm | 0.2 / 0.25mm | SUS304/316L | Leqhubu la annular | ||||||
| 20 limilimithara | ID20 x OD25mm | 0.2 / 0.25mm | SUS304/316L | Leqhubu la annular | ||||||
| 25 limilimithara | ID25 x OD32mm | 0.2 / 0.25mm | SUS304/316L | Leqhubu la annular | ||||||
| 32 limilimithara | ID32 x OD42mm | 0.2 / 0.25mm | SUS304/316L | Leqhubu la annular | ||||||
| Pipe Diameter | DN1/2-32inch (DN12-800mm) |
| Lisebelisoa tsa Pipe | SS321, 304, 316, 316L |
| Mofuta oa Pipe | Peipi e entsoeng ka annular |
| Botenya ba phala | 0.28-1.0mm |
| Lisebelisoa tsa mesh tse lohiloeng | SS304 |
| Mesh e lohiloeng | lera le le leng kapa lera le habeli kapa lera tse tharo |
| Max. khatello ea ho sebetsa | 10Mpa ~ 35MPa |
| Mocheso o sebetsang | (-200)~(+800) °c |
| Mofuta oa khokahano | Flange, linate, li-fittings tse potlakileng, |
| Standard | GB/T14525-2010, ANSI,JIS,DIN,GOST |
| Lisebelisoa tsa flange | tšepe e sa hloekang kapa alloy nickle |
| Bolelele ba kopano ea liphaephe | ho latela litlhoko tsa bareki |
| NO. | DN | ID | OD | Bohole ba lebelo | Botenya ba lebota | boima ba maikutlo |
| (KG/M) | ||||||
| 1 | 12 | 11.6 | 18 | 3 | 0.2 | 0.17 |
| 2 | 15 | 14.4 | 21.5 | 3.5 | 0.3 | 0.28 |
| 3 | 18 | 17.4 | 25.5 | 3.5 | 0.3 | 0.34 |
| 4 | 20 | 19.4 | 27 | 4.5 | 0.3 | 0.38 |
| 5 | 25 | 24.4 | 32.5 | 5 | 0.3 | 0.46 |
| 6 | 32 | 31.4 | 40 | 5.5 | 0.3 | 0.6 |
| 7 | 40 | 39.4 | 50 | 6 | 0.3 | 0.75 |
| 8 | 50 | 49.4 | 63 | 7.5 | 0.3 | 0.9 |
| 9 | 65 | 64.4 | 81 | 9 | 0.3 | 1.6 |
| 10 | 80 | 79.2 | 98 | 10.5 | 0.4 | 2 |
| 11 | 100 | 99.2 | 120 | 13 | 0.4 | 2.6 |
| 12 | 125 | 124 | 150 | 14.5 | 0.5 | 3.9 |
| 13 | 150 | 149 | 180 | 17.5 | 0.5 | 4.3 |
| 14 | 200 | 198.8 | 240 | 24 | 0.6 | 6.8 |
| 15 | 250 | 248.4 | 300 | 28 | 0.8 | 11 |
| 16 | 300 | 298 | 355 | 33.5 | 1 | 17.5 |
| 17 | 350 | 348 | 410 | 35 | 1 | 20 |
| 18 | 400 | 397.6 | 460 | 40 | 1.2 | 25 |
| 19 | 450 | 447.6 | 489 | 45 | 1.2 | 29 |
| 20 | 500 | 497.6 | 545 | 45 | 1.2 | 33.5 |
| 21 | 600 | 597.6 | 650 | 50 | 1.2 | 40.5 |
Lisebelisoa:
Indasteri ea tšepe le tšepe/ Limela tsa peterole le tsa khase/ Indasteri ea khemistri/ Litsamaiso tsa ho futhumatsa le ho pholisa/ Indasteri ea lijo/ Indasteri ea makoloi/ Litsi tsa tlhahiso ea pampiri/ Indasteri ea maoatleng/ Indasteri ea tšireletso/ Litsamaiso tse tsamaeang/ Mofuta ofe kapa ofe oa litsi tsa polokelo le lihokelo tsa litanka.
Hot Tags: tšepe e sa jeleng paate bahlahisi ba liphaephe, bafani, theko, e rekisoang
