304 stainless steel round bar
Saky Steel is a leading manufacturer of stainless steel bright round bars. Our stainless steel bright round bars has manufactured as per international standard for any machining and industrial applications. Our stainless steel bright round bars are one of the most appreciable products for various applications like machining tools, fasteners, automotive applications, pump shafts, motor shafts, valve and many more.
Our stainless steel bright bars is one of the most extensive range of bars for various components manufacturing in the market. It has strong corrosion resistance ability and low maintenance characteristics which make it an absolute product for a wide range of applications.
Our stainless steel bright round bars have various grades and different size. We also provide manufacturing service as per client requirements.
Stainless Steel Round Bar Grades:
Our bright round bars available in various grades including stainless steel 201, 202, 204Cu, 304, 304L, 309, 316, 316L, 316Ti, 321, 17-4ph, 15-5ph and 400 Series.
|Specification:||ASTM A/ASME A249, A268, A269, A270, A312, A790|
|Stainless Steel Round Bars:||Outside Diameter in the range of 4mm to 500mm|
|Stainless Steel Bright Bars:||Outside Diameter in the range of 4mm to 100mm|
|Supply Condition:||Solution Annealed, Soft Annealed, Solution Annealed, Quenched & Tempered, Ultrasonic Tested, Free from Surface Defects and Cracks, Free from Contamination|
|Length:||1 to 6 meters & as per customer requirement|
|Finish:||Cold Drawn, Centreless Ground, Peeled & Polished, Rough Turned|
|Packing:||Each steel bar has the singal, and several will be bundled by weaving bag or as per requirement.|
|Condition||cold drawn & polished||cold drawn, centreless ground & polished||cold drawn, centreless ground & polished (strain hardened)|
|Grades||201, 202, 303, 304, 304l, 310, 316, 316l, 32, 410, 420, 416, 430, 431, 430f & others||304, 304l, 316, 316l|
|Diameter (size)||2 mm to 5mm (1/8″ to 3/16″)||6mm to 22m (1/4″ to 7/8″)||10mm to 40mm (3/8″ to 1-1/2″)|
|Diameter tolerance||H9 (DIN 671),H11
|H9 (DIN 671)
|H9 (DIN 671),H11
|Length||3/4/5. 6/6 meter (12/14ft/20feet)||3/4/5. 6/6 meter (12/14ft/20feet)||3/4/5. 6/6 meter (12/14ft/20feet)|
|Length tolerance||-0/+200mm or +100mm or +50mm
(-0 ”/+1 feet or +4 ” or 2 ”)
|-0/+200mm or +100mm or +50mm
(-0 ”/+1 feet or +4 ” or 2 ”)
(-0 ”/+1 feet)
Stainless Steel 304/304L Bar Equivalent Grades:
|SS 304||1.4301||S30400||SUS 304||304S31||08Х18Н10||Z7CN18‐09||X5CrNi18-10|
|SS 304L||1.4306 / 1.4307||S30403||SUS 304L||3304S11||03Х18Н11||Z3CN18‐10||X2CrNi18-9 / X2CrNi19-11|
SS 304 / 304L Bar Chemical Composition and Mechanical properties:
|SS 304||0.08 max||2 max||0.75 max||0.045 max||0.030 max||18 – 20||-||8 – 11||-|
|SS 304L||0.035 max||2 max||1.0 max||0.045 max||0.03 max||18 – 20||-||8 – 13||-|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.0 g/cm3||1400 °C (2550 °F)||Psi – 75000 , MPa – 515||Psi – 30000 , MPa – 205||35 %|
SAKY STEEL’S Quality Assurance (including both Destructive and Non-Destructive) :
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Ultrasonic test
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Impact analysis
10. Metallography Experimental Test
SAKY STEEL’S Packaging:
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Saky Steel’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
- Auto mobile industries
- Heavy engineering
- Textile industries
- Electric motors
- Industrial pumps
- Agriculture Section
- Oil & petroleum
- Architectural applications
- Valve manufacturing
- Bearing manufacturing and many more.