He aha ka 1.2767 Mea Hana kila e like me

Waiwai	Waiwai
ʻO ka paʻakikī (ma hope o ka mālama ʻana i ka wela)	55 – 60 HRC
Ikaika U'i	A hiki i 2000 MPa
Kū'ē i ka hopena	maikaʻi loa
Ka paakiki	Maikaʻi (ea a ʻaila paha)
Ka Mahana Hana	A hiki i 500 ° C i kekahi mau noi

Ua makemake nui ʻia kēia mau waiwai i ka 1.2767 a me kāna mau mea like i nā noi ma kahika haʻalulu, ke kaomi, a me ke kūpale ʻaʻahuhe koʻikoʻi.

---

Nā noi o 1.2767 Mea kila kila

Ma muli o kona paʻakikī kiʻekiʻe a me ka ikaika, hoʻohana ʻia ka 1.2767 a me kāna mau mea like i nā ʻano mea hana like ʻole a me nā noi ʻoihana.

• ʻO nā mea hoʻoheheʻe palaki(ʻoi loa no nā plastic i hoʻoikaika ʻia)

• Kuʻi a makeno ka hana anu

• ʻAhi ʻāhia me nā mea ʻoki

• Nā pahi ʻoihana

• Make ka extrusion

• Make forgingno nā ʻāpana māmā

• Mea paahana make

• Nā mea hana no ke kaha kiʻi hohonu a me ka hana ʻana

I loko o ka ʻoihana mold a make, koho pinepine ʻia ʻo 1.2767 no nā mea hana i ʻike ʻiaka hoʻouka ʻana a me ke koʻikoʻi mechanical kiʻekiʻe.

---

Nā pōmaikaʻi o ka hoʻohana ʻana i ka 1.2767 a me kāna mau mea like

Eia nā mea maikaʻi loa o ke koho ʻana i ka 1.2767 a i ʻole nā mea like like me L6:

1. ʻO ka ʻoʻoleʻa maikaʻi loa i ka paʻakikī kiʻekiʻe

Hiki ke mālama ʻia i ka wela e loaʻa ai ka paʻakikī kiʻekiʻe me ka ʻole o ka palupalu. ʻO kēia ka mea kūpono no nā mea hana i hoʻopaʻa pinepine ʻia.

2. Kaulike paakiki

Mahalo i kona paʻakikī maikaʻi, hiki ke paʻakikī paʻakikī nui nā mea hana keʻa.

3. Paʻa Paʻa

Hōʻike ke kila i ke kūpaʻa dimensional maikaʻi loa i ka wā e hoʻopio ai a me ka hoʻoulu ʻana.

4. Hoʻopau ʻili maikaʻi

Hiki ke hoʻonaniʻia i kahi kiʻekiʻe kiʻekiʻe, kūpono i nā'ōmole hoʻopau aniani.

5. Loaʻa i ka honua

Me nā mea like e like me L6 a me SKT4, hiki i nā mea kūʻai ke kiʻi i nā māka like mai nā ʻāina a me nā mea hoʻolako likesakysteel.

---

Hoʻomaʻamaʻa wela o 1.2767 / L6

He mea koʻikoʻi ka mālama wela kūpono no ka loaʻa ʻana o nā waiwai i makemake ʻia. Aia nā ʻanuʻu maʻamau:

1. Hoʻopili:

   • 650 – 700°C, hoʻoluʻu lohi i ka umu ahi

   • Hoʻopili ʻia i ka 220 HB

2. paʻakikī:

   • E wela mua i ka 600 – 650°C

   • Austenitize ma 850 – 870°C

   • E kinai i ka aila a me ka ea

3. Hoʻohālua:

   • 200 – 600°C ma muli o ka noi

   • Hoʻomaʻamaʻa pinepine ʻia ʻelua e hoʻopau i ke kaumaha

---

Machinability a me ka lapaʻau ʻili

I kakūlana annealed, 1.2767 maikaʻi ka machinability, ʻaʻole naʻe i like ke kiʻekiʻe e like me nā mea hao haʻahaʻa haʻahaʻa. Paipai ʻia nā mea hana Carbide a me nā ʻōnaehana hoʻoluʻu kūpono. ʻO nā lāʻau lapaʻau e like menitriding, uhi PVD, a i ʻoleplasma nitridinghiki ke hoʻonui i ka pale lole a me ke ola lawelawe.

---

Manaʻo kōkua: E kiʻi i ke kila kila maikaʻi mai nā mea hoʻolako hilinaʻi

Inā makemake ʻoe1.2767a i ʻole kona mau mea likeAISI L6, he mea koʻikoʻi ka maikaʻi a me ka traceability. E koho mau i nā mea hoʻolako kaulana me ka mana kūpono a me nā palapala.

sakysteel, he mea hoʻolako hilinaʻi o nā mea hao a me nā mea kila kila, hāʻawi:

• DIN 1.2767 a me AISI L6 mea kila me nā MTC piha

• Nā nui maʻamau a me nā lawelawe ʻokiʻoki i ka lōʻihi

• ʻO ka mālama wela a me nā koho hoʻoponopono ili

• Hoʻouna wikiwiki a me ke kākoʻo ʻenehana

sakysteelhōʻoia i ka maikaʻi pololei no ka koi ʻana i nā mea hana a me nā papahana ʻenekinia.

---

Hōʻuluʻulu manaʻo

1.2767 mea kilaʻO ia ka kila kila kila kiʻekiʻe i ʻike ʻia no kona ʻoi aku ka paʻakikī a me ke kūpaʻa ʻana i ke kapa. ʻO kāna mea like maʻamau o ka honuaAISI L6, me nā mea like e like me SKT4 ma Iapana a me BD2 ma UK. Inā ʻoe e hana ana i nā ʻāpana ʻāhi, nā ʻōpala plastik, a i ʻole make, me ka hoʻohana ʻana i ka 1.2767 a i ʻole kāna mea like e hōʻoia i ka hana maikaʻi loa ma lalo o ke kaumaha.

ʻO ka hoʻomaopopo ʻana i nā mea like e hiki ai i ka hoʻololi ʻana o ka honua holoʻokoʻa a hōʻoia i ka hoʻohālikelike ʻana me kāu mau hana hana. No nā mea kūʻai aku, nā mea ʻenekinia, a me nā mea hana mold ma ka honua holoʻokoʻa, e kiʻi mai nā mea hoʻolako likesakysteelhōʻoia i ka hana paʻa a me ka hilinaʻi.

---