Alloy Wire

Short Description:


  • Specifications: ASTM B160
  • diameter: 0.50 mm to 10 mm
  • Type: Wire Bobbin, Wire Coil
  • Surface: Black, Bright, Polished
  • Product Detail

    Product Tags

    sakysteel is a stockholder and supplier of Alloy products:

    · Pipe (seamless & welded)

    · Bar (round, angle,flat,square,hexagonal & channel)

    · Plate & sheet & coil & strip

    · Wire

    Alloy 200 Equivalents: UNS N02200/Nickel 200/Werkstoff 2.4066

    Applications Alloy 200:
    Alloy 200 is a 99.6% pure nickel alloy which is used extensively in the (petro)chemical industry

    Alloy 200:
    Chemical analysis Alloy 200: Alloy 200 ASTM standards:
    Nickel – 99,0% min. Bar/Billet – B160
    Copper – 0,25% max. Forgings/Flanges – B564
    Manganese – 0,35% max. Seamless Tubing – B163
    Carbon – 0,15% max. Welded Tubing – B730
    Silicon – 0,35% max. Seamless Pipe – B163
    Sulfur – 0,01% max. Welded Pipe – B725
      Plate – B162
    Density Alloy 200: 8,89 Buttweld fittings – B366

    Alloy 201 Equivalents: UNS N02201/Nickel 201/Werkstoff 2.4068

    Applications Alloy 201:
    Alloy 201 is a commercially pure (99.6%) Nickel alloy very similar to Alloy 200 but with a lower carbon content to so it can be used at higher temperatures. The lower carbon content also reduces hardness, making Alloy 201 particularly suitable for cold-formed items.

    Alloy 201:
    Chemical analysis Alloy 201: Alloy 201 ASTM standards:
    Nickel – 99,0% min. Bar/Billet – B160
    Copper – 0,25% max. Forgings/Flanges – B564
    Manganese – 0,35% max. Seamless Tubing – B163
    Carbon – 0,02% max. Welded Tubing – B730
    Silicon – 0,35% max. Seamless Pipe – B163
    Sulfur – 0,01% max. Welded Pipe – B725
      Plate – B162
    Density Alloy 201: 8,89 Buttweld fittings – B366

    Alloy 400 Equivalents: UNS N04400/Monel 400/Werkstoff 2.4360

    Applications Alloy 400:

    Alloy 400 is a nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers.

    Alloy400:
    Chemical analysis Alloy 400: Alloy 400 ASTM standards:
    Nickel – 63,0% min. (incl. cobalt) Bar/Billet – B164
    Copper -28,0-34,0% max. Forgings/Flanges – B564
    Iron – 2,5% max. Seamless Tubing – B163
    Manganese – 2,0% max. Welded Tubing – B730
    Carbon – 0,3% max. Seamless Pipe – B165
    Silicon – 0,5% max. Welded Pipe – B725
    Sulfur – 0,024% max. Plate – B127
    Density Alloy 400: 8,83 Buttweld fittings – B366

    Alloy 600 Equivalents: UNS N06600/Inconel 600/Werkstoff 2.4816

    Applications Alloy 600:
    Alloy 600 is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes.

    Alloy 600:
    Chemical analysis Alloy 600: Alloy 600 ASTM standards:
    Nickel – 62,0% min. (incl. cobalt) Bar/Billet – B166
    Chromium – 14.0-17.0% Forgings/Flanges – B564
    Iron – 6.0-10.0% Seamless Tubing – B163
    Manganese – 1,0% max. Welded Tubing – B516
    Carbon – 0,15% max. Seamless Pipe – B167
    Silicon – 0,5% max. Welded Pipe – B517
    Sulfur – 0,015% max. Plate – B168
    Copper -0,5% max. Buttweld fittings – B366
    Density Alloy 600: 8,42  

    Alloy 625 Equivalents: Inconel 625/UNS N06625/Werkstoff 2.4856

    Applications Alloy 625:
    Alloy 625 is a nickel-chromium-molybdenum alloy with niobium added. This provides high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

    Alloy 625:
    Chemical analysis Alloy 625: Alloy 625 ASTM standards:
    Nickel – 58,0% min. Bar/Billet – B166
    Chromium – 20.0-23.0% Forgings/Flanges – B564
    Iron – 5.0% Seamless Tubing – B163
    Molybdenum 8,0-10,0% Welded Tubing – B516
    Niobium 3,15-4,15% Seamless Pipe – B167
    Manganese – 0,5% max. Welded Pipe – B517
    Carbon – 0,1% max. Plate – B168
    Silicon – 0,5% max. Buttweld fittings – B366
    Phosphorous: 0,015% max.  
    Sulfur – 0,015% max.  
    Aluminium: 0,4% max.  
    Titanium: 0,4% max.  
    Cobalt: 1,0% max. Density Alloy 625 625: 8,44

    Alloy 825 Equivalents: Incoloy 825/UNS N08825/Werkstoff 2.4858

    Applications Alloy 825:

    Alloy 825 is a nickel-iron-chromium alloy with molybdenum and copper added to it. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. The alloy is especially resistant to sulfuric and phosphoric acids. Used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.

    Applications Alloy C276:

    Alloy C276 has a very good resistance to a variety of chemical process environments such as hot contaminated organic and inorganic media, chlorine, formic and acetic acids, acetic anhydride, seawater and brine solutions and strong oxidizers such as ferric and cupric chlorides. Alloy C276 has excellent resistance to pitting and to stress-corrosion cracking but it is also used in flue gas desulfurization systems for sulfur compounds and chloride ions encounted in most scrubbers. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

    Alloy C276:
    Chemical analysis Alloy C276: Alloy C276 ASTM standards:
    Nickel – balance Bar/Billet – B574
    Chromium – 14,5-16,5% Forgings/Flanges – B564
    Iron – 4,0-7,0% Seamless Tubing – B622
    Molybdenum – 15,0-17,0% Welded Tubing – B626
    Tungsten – 3,0-4,5% Seamless Pipe – B622
    Cobalt – 2,5% max. Welded Pipe – B619
    Manganese – 1,0% max. Plate – B575
    Carbon – 0,01% max. Buttweld fittings – B366
    Silicon – 0,08% max.  
    Sulfur – 0,03% max.  
    Vanadium – 0,35% max.  
    Phosphorus – 0,04% max Density Alloy 825: 8,87

    Titanium Grade 2 – UNS R50400

    Applications Titanium Grade 2:
    Titanium Grade 2 is a commercially pure Titanium (CP) and is the most commonly used type of Titanium for industrial applications. Titanium Grade 2 is used extensively for sea water piping, reactor vessels and heat exchangers in the (Petro)-chemical, Oil & Gas and Marine Industries. This is partly due to its low density and corrosion resistance and can be easily welded, hot and cold worked and machined.

    Titanium Grade 2:
    Chemical analysis Titanium Grade 2: Titanium Grade 2 ASTM standards:
    Carbon – 0,08% max. Bar/Billet – B348
    Nitrogen – 0,03% max. Forgings/Flanges – B381
    Oxygen – 0,25% max. Seamless Tubing – B338
    Hydrogen – 0,015% max. Welded Tubing – B338
    Iron – 0,3% max. Seamless Pipe – B861
    Titanium – balance Welded Pipe – B862
      Plate – B265
    Density Titanium Grade 2: 4,50 Buttweld fittings – B363

    Hot Tags: alloy bar manufacturers, suppliers, price, for sale


  • Previous:
  • Next:

  • Related Products