Wayar walda ta DPM150 Flux Cored Hardfacing don sandunan haƙa
Takaitaccen Bayani:
DPM150 waya ce ta rufi da aka ƙera don yanayin lalacewa mai ƙarfi. Tsarin ƙarfe na walda yana da kauri, taurinsa yana da yawa, kuma yana da juriyar lalacewa mai kyau da kuma juriyar tsagewa mai kyau. Ya dace da gyaran rufi ko ƙarfafa kayan aiki kamar bututun haƙa mai, ma'adinan kwal, da guduma masu fashewa.
Wayar Walda ta DPM150 Flux Cored Hardfacing:
DPM150 waya ce mai kariyar flux-core wadda aka ƙera don sandunan haƙa mai kauri da sassan da ke fuskantar tsatsa da kuma tasirin da ba a iya misaltawa a masana'antar haƙa ma'adinai, man fetur, da kwal. Tana samar da tsari mai yawa na martensitic tare da carbides masu tauri da aka watsar. DPM150 waya ce mai kariyar flux-core wadda aka ƙera musamman don sandunan haƙa mai kauri da kayan aikin haƙa ma'adinai. Tana ba da juriya mai kyau ga tsatsa tare da tauri har zuwa HRC 60 da juriya mai ƙarfi a ƙarƙashin walda mai layuka da yawa. DPM150 mai kariyar kanta kuma mai sauƙin aiki ne, ya dace da aikace-aikacen filin ba tare da iskar gas mai karewa ba. Ya dace da kayan aikin filin mai, injinan haƙa ma'adinai na kwal, da kayan aikin gini waɗanda ke buƙatar kariyar lalacewa mai ƙarfi da dorewar tasiri.
Bayani dalla-dalla na Wayar Walda ta DPM150:
| Matsayi | DPM150, DPM300, DPM700, DPM900, da sauransu. |
| Daidaitacce | ISO 14700 / EN 14700 (misali T Fe15 Equivalent); Ana iya samun takamaiman bayanai idan an buƙata. |
| saman | Mai haske, Mai santsi |
| diamita | 1.6mm / 2.0mm / 2.4mm |
| Tauri | HRC 55–60 |
| Hanyar Walda | Buɗaɗɗen Arc (Wayar Flux Cored mai karewa da kanta) |
| Tsawon | 100 mm ZUWA 6000 mm, ana iya gyara shi |
| Aikace-aikacen da Aka saba | Sassan Sashen Haɗawa na Drill Rod / Haƙar Ma'adinai |
Haɗin Sinadarin Wayar Walda ta DPM150:
| Matsayi | C | Si | Mn | P | S | Mo |
| DPM150 | 0.71 | 1.0 | 2.1 | 0.08 | 0.08 | 0.35 |
| DPM300 | 0.73 | 1.01 | 2.2 | 0.04 | 0.05 | 0.51 |
| DPM700 | 0.69 | 1.2 | 2.1 | 0.08 | 0.08 | 0.35 |
| DPM900 | 0.71 | 1.2 | 2.1 | 0.08 | 0.08 | 0.35 |
Kayayyakin Inji:
| Matsayi | Na yau da kullun | Taurin kai (HRC) |
| DPM150 | 55 | 52–57 |
| DPM300 | 59 | 57-62 |
| DPM700 | 63 | 60-65 |
| DPM900 | 64 | 60-65 |
Sigogi na Walda:
| Matsayi | Diamita na Waya (mm) | Wutar lantarki (V) | Na yanzu (A) | Fitar da kaya (mm) | Yawan Gudun Gas (L/min) |
| DPM150 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
| DPM300 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
| DPM700 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
| DPM900 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
Babban fasali Wayar Walda ta DPM150:
• Taurin kai mai ma'ana da isasshen ƙarfi (HRC 52–57), juriya mai kyau ga lalacewa, yana ƙara tsawon rayuwar haɗin gwiwa na sandar haƙa rami fiye da sau 3;
• Yana rage karyewar kayan aiki da rage farashin gyara da maye gurbinsu. Ko da lokacin da aka rage girman kayan aiki, ƙarfin haɗin kai tare da kan kayan aikin yana da ƙarfi, kuma babu wata alaƙa da ke tsakanin abin da ke da ƙarfi da kan kayan aikin;
• Asarar ƙarfe sakamakon gogewar FRW-DPM150 ƙasa da kashi 12% na kayan gargajiya masu jure lalacewa;
• Kyakkyawan sauƙin walda da kuma kyakkyawan yanayin walda;
• Mai jure tsagewa: Babu tsagewa da ake gani bayan walda da sanyaya a yanayi na yau da kullun;
• Kyakkyawan siffar baka, lu'u-lu'u mai santsi, da ƙarancin fesawa;
• Ana iya amfani da shi a kan walda mai rufe saman kan sandunan haƙa, abin wuya na haƙa, masu daidaita abubuwa, da kuma wurare daban-daban na filin mai da kayan aikin haƙa ma'adinai;
• Ya dace da kayan da ke da ƙarfi da yawa.
Bayanan kula da walda na DPM150 Wayar Walda:
1. Tsaftace yankin da ke jure lalacewa +1" (25.4mm) a bayan gefen (cire mai, tsatsa, oxide, da sauransu). Tabbatar da cewa haɗin gwiwa mai ƙarfi tsakanin layin saman da haɗin kayan aiki shine mabuɗin dorewa.
2. Yi amfani da iskar gas mai gauraya (75%-80% Ar + CO₂) ko kuma iskar gas mai kariyar CO₂ 100%, ana ba da shawarar yawan kwarara: 20-25 L/min.
3. Ana buƙatar sarrafa zafin jiki kafin dumamawa da kuma lokacin wucewa.
4. Ana buƙatar sanyaya a hankali bayan an yi walda. Yi amfani da bargon rufi idan akwai buƙata.
5. Idan zafin bayan walda ya faɗi ƙasa da 66°C, ana ba da shawarar a yi amfani da shi wajen dumama jiki.
RAHOTAN GWAJI DPM150:
Aikace-aikacen Wayar Walda ta DPM150 Mai Karfi:
• Taurare sandunan haƙa mai da ake amfani da su wajen haƙa mai da haƙar kwal
• Rufin da ke jure lalacewa ga bokiti, na'urorin gogewa, da kuma sprockets a cikin injinan haƙar ma'adinai
• Ƙarfafa kayan aikin filin mai kamar su injin haƙa rami da injinan ream
• Faɗaɗa saman sassan haƙa rami, ruwan wukake na bulldozer, da kuma faifan mahaɗa
• Kariya ga masu niƙa, masu naɗewa, da ruwan fanka a masana'antar siminti da ƙarfe
Me Yasa Zabi Mu?
•Za ka iya samun cikakken kayan da ya dace da buƙatunka a mafi ƙarancin farashi.
•Muna kuma bayar da farashin jigilar kaya daga gida zuwa gida, wato Reworks, FOB, CFR, CIF, da kuma jigilar kaya daga gida zuwa gida. Muna ba da shawarar ku yi ciniki da jigilar kaya wanda zai yi muku arha sosai.
•Kayan da muke bayarwa ana iya tantance su gaba ɗaya, tun daga takardar shaidar gwajin kayan aiki zuwa bayanin girma na ƙarshe. (Rahotanni za su nuna idan an buƙata)
•Muna da tabbacin bayar da amsa cikin awanni 24 (yawanci a cikin awa ɗaya)
•Bayar da rahoton SGS TUV.
•Mun sadaukar da kanmu ga abokan cinikinmu. Idan ba zai yiwu mu cika buƙatunku ba bayan mun duba dukkan zaɓuɓɓuka, ba za mu ɓatar da ku ta hanyar yin alkawuran ƙarya waɗanda za su haifar da kyakkyawar alaƙar abokan ciniki ba.
•Bayar da sabis na tsayawa ɗaya.
Wayar Walda ta DPM150 Flux Cored:
1. Shirya kaya yana da matuƙar muhimmanci musamman a yanayin jigilar kaya zuwa ƙasashen waje inda jigilar kaya ke ratsawa ta hanyoyi daban-daban don isa inda za a kai, don haka muna ba da kulawa ta musamman game da shirya kaya.
2. Saky Steel's suna tattara kayanmu ta hanyoyi da dama bisa ga kayayyakin. Muna tattara kayayyakinmu ta hanyoyi da dama, kamar,
