DPM150 Flux Cored Hardfacing Welding Waya maka mkpanaka Drill
Nkọwa dị mkpirikpi:
DPM150 bụ waya mkpuchi emebere maka ọnọdụ iyi dị elu. The weld metal Ọdịdị bụ ok, ekweghị ekwe bụ elu, na ọ nwere magburu onwe eyi nguzogide na ezi mgbape eguzogide. Ọ dabara adaba maka nrụzi ma ọ bụ mgbochi mgbochi ike nke workpieces dị ka ọkpọkọ mkpọ mmanụ, scrapers na-egwupụta kol, na hama na-agbaji.
DPM150 Flux Cored Hardfacing Welding Waya:
DPM150 bụ waya ịgbado ọkụ na-ekpuchi onwe ya nke emebere maka mkpanaka mgbanaka siri ike na ihe ndị ekpughere na abrasion siri ike na mmetụta na-agafeghị oke na ụlọ ọrụ na-egwupụta akụ, mmanụ ala, na coal. Ọ na-arụpụta a ok martensitic Ọdịdị na gbasasịa ike carbides.DPM150 bụ a elu-arụmọrụ flux-cored ịgbado ọkụ waya kpọmkwem e mere maka hardfacing akuakuzinwo mkpara na Ngwuputa ngwaọrụ. Ọ na-enye nguzogide abrasion dị mma yana ike ruo HRC 60 yana nguzogide mgbape dị elu n'okpuru ịgbado ọkụ multi-layer. Ejiri onwe ya ma dị mfe ịrụ ọrụ, DPM150 dị mma maka ngwa ubi na-enweghị mkpuchi gas. Kwesịrị ekwesị maka akụrụngwa ebe mmanụ, igwe na-egwupụta coal, na ngwaọrụ ihe owuwu chọrọ nchebe iyi siri ike na ịdịte aka.
Nkọwa nke DPM150 Waya Welding Hardfacing:
| Ọkwa | DPM150,DPM300,DPM700,DPM900, wdg. |
| Ọkọlọtọ | ISO 14700 / EN 14700 (dịka T Fe15 Dakọtara); Nkọwapụta omenala dị mgbe a rịọrọ ya. |
| Elu | Na-egbuke egbuke, dị nro |
| Dayameta | 1.6mm / 2.0mm / 2.4mm |
| Isi ike | HRC 55–60 |
| Usoro ịgbado ọkụ | Mepee Arc (Flux Cored Waya na-echebe onwe ya) |
| Ogologo | 100 mm ruo 6000 mm, nhazi |
| Ngwa a na-ahụkarị | Akụkụ mgbanaka mgbanaka / Ngwuputa ihe |
Ihe mejupụtara kemịkalụ kemịkalụ DPM150:
| Ọkwa | C | Si | Mn | P | S | Mo |
| DPM150 | 0.71 | 1.0 | 2.1 | 0.08 | 0.08 | 0.35 |
| DPM300 | 0.73 | 1.01 | 2.2 | 0.04 | 0.05 | 0.51 |
| DPM700 | 0.69 | 1.2 | 2.1 | 0.08 | 0.08 | 0.35 |
| DPM900 | 0.71 | 1.2 | 2.1 | 0.08 | 0.08 | 0.35 |
Ngwa igwe:
| Ọkwa | Ụdị | Isi ike (HRC) |
| DPM150 | 55 | 52–57 |
| DPM300 | 59 | 57-62 |
| DPM700 | 63 | 60-65 |
| DPM900 | 64 | 60-65 |
Oke ịgbado ọkụ:
| Ọkwa | Dayameta waya (mm) | Voltaji (V) | Ugbu a (A) | Mkpesa (mm) | Ọnụego ikuku gas (L/min) |
| DPM150 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
| DPM300 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
| DPM700 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
| DPM900 | 1.6 | 26–36 | 260–360 | 15–25 | 18–25 |
Isi atụmatụ DPM150 Welding Waya:
• ezi uche na ike siri ike zuru oke (HRC 52-57), nkwụsi ike na-eyi nke ọma, na-abawanye ndụ nkwonkwo ogbugba ihe karịrị ugboro 3;
• Na-ebelata nkwụsịtụ ma na-ebelata ụgwọ nrụzi na ndochi. Ọbụna mgbe wear oyi akwa na thinned, na bonding ike na akuakuzinwo isi na-anọgide ike, na ọ dịghị anya interface n'etiti hardfacing na akuakuzinwo isi;
• Ọnwụ ọla n'ihi abrasion nke FRW-DPM150 bụ ihe na-erughị 12% nke ihe eji egbochi ejiji omenala;
• Ọmarịcha weldability na ọdịdị dị mma nke bead weld;
• mgbawa na-eguzogide: Ọ dịghị anya mgbape mgbe ịgbado ọkụ na jụrụ n'okpuru nkịtị ọnọdụ;
• Ọdịdị arc mara mma, bead dị larịị, na obere spatter;
• Enwere ike itinye ya na ịgbado ọkụ na-ekpuchi elu n'elu mkpanaka mkpọmkpọ ebe, akwa olu, stabilizers, na ebe dị iche iche mmanụ na ebe a na-egwupụta ihe;
• dakọtara na otutu ihe nrụgide siri ike.
Ihe ndetu ịgbado ọkụ nke waya DPM150:
1.Clean the wear-resistant surfacing area +1" (25.4mm) n'ofe nsọtụ (wepụ mmanụ, nchara, oxide, wdg) hụ na njikọ siri ike n'etiti oyi akwa na nkwonkwo ngwá ọrụ bụ isi ihe maka ịdịte aka.
2.Jiri gas agwakọta (75% -80% Ar + CO₂) ma ọ bụ 100% CO₂ na-ekpuchi gas, ọnụego akwadoro: 20-25 L / min.
3.Preheating na interpass okpomọkụ akara chọrọ.
4.Post-weld ngwa ngwa jụrụ chọrọ. Jiri mkpuchi mkpuchi ma ọ bụrụ na ọ dị mkpa.
5.If post-weld okpomọkụ dara n'okpuru 66 ° C, tempering na-atụ aro.
Akụkọ ule DPM150:
Ngwa Waya Welding Hardfacing DPM150:
• Ịkwụsị okporo osisi ndị a na-eji na-egwupụta mmanụ na ngwuputa kol
• Mkpuchi na-eguzogide ọgwụ maka bọket, ihe mkpofu ebu, na sprockets n'ime igwe Ngwuputa
• Nkwanye ngwa ọrụ ebe mmanụ dị ka ihe amịpụta na reamers
• Nrụgide ihu nke akụkụ ihe ngwupụta ihe, agụba bulldozer, na paịlị igwekota
• Ihe mkpuchi mkpuchi maka ndị na-egweri, rollers, na fan agụba na ciment na ụlọ ọrụ ígwè
Gịnị mere họrọ anyị?
•Ị nwere ike nweta ihe zuru oke dịka ihe ị chọrọ na ọnụ ahịa kacha nta.
•Anyị na-enyekwa Reworks, FOB, CFR, CIF, na ọnụ ụzọ nnyefe ọnụ ụzọ. Anyị na-atụ aro ka ịme azụmahịa maka mbupu nke ga-adị oke ọnụ ahịa.
•Ihe anyị na-enye bụ nke a na-enyocha kpamkpam, site na akwụkwọ nyocha akụrụngwa ruo na nkwupụta akụkụ ikpeazụ. (Mkpesa ga-egosi na achọrọ)
•Anyị na-ekwe nkwa ịnye nzaghachi n'ime awa 24 (na-abụkarị n'otu elekere)
•Nye akụkọ SGS TUV.
•Anyị raara onwe anyị nye ndị ahịa anyị n'ụzọ zuru ezu. Ọ bụrụ na ọ gaghị ekwe omume imezu ihe ndị ị chọrọ mgbe ị nyochachara nhọrọ niile, anyị agaghị eduhie gị site n'ịkwe nkwa ụgha nke ga-eme ka ndị ahịa dị mma.
•Nye ọrụ nkwụsịtụ.
DPM150 Flux Cored Welding Waya Mbukota:
1. Nkwakọ ngwaahịa dị ezigbo mkpa karịsịa n'ihe gbasara mbupu mba ofesi nke mbupu na-agafe na ọwa dị iche iche iji ruo ebe kachasị elu, yabụ anyị na-etinye nchegbu pụrụ iche gbasara nkwakọ ngwaahịa.
2. Saky Steel's mkpọ ngwongwo anyị n'ọtụtụ ụzọ dabere na ngwaahịa. Anyị na-akwakọ ngwaahịa anyị n'ọtụtụ ụzọ, dị ka,
