Pae maitai taputapu mahi wera tino pai ASTM A681 H13 EFS
Whakaahuatanga Poto:
Ka tukuna e te pae maitai taputapu wera H13 EFS Super Fine te hanganga pai, te ātete ki te ngenge wera me te kaha wera mō ngā mate maka mate, ngā taputapu extrusion me ngā wete wera. Kei te wātea te diameter ritenga, te mata, te tapahi, te UT, te MTC me te EN 10204 3.1.
Ko te Pae Rino Mahi Wera Tino Pai H13 EFS he maitai taputapu mahi wera momo H13 kua whakapaia, he mea tuku mai hei pae porowhita, hei pae hanga rānei mō ngā mate whakarewa, ngā taputapu whakaputa, ngā patu wera, ngā mandrel, ngā mata kutikuti wera me ngā taputapu hanga pāmahana-tiketike. He mea hono noa ki te AISI H13, UNS T20813, DIN 1.2344, JIS SKD61 me te X40CrMoV5-1, i runga i te whakatakotoranga e tika ana.
Ka tukuna e SAKY STEEL te pae maitai taputapu H13 EFS Super Fine i roto i te āhua kua whakamahanatia, kua whakapūkaratia, kua tihoretia, kua hurihia, kua hurihia rānei, kia rite ki ngā whakaritenga o te hoko. Ko ngā ratonga e wātea ana ko te tapahi, te tihoretia, te huri, te huri, te miihini taratara, te tirotiro i ngā āhuatanga, te whakamātautau pakeke, te whakamātautau ultrasonic ina tohua, ngā tuhinga MTC me EN 10204 3.1.
Ngā Tawhā Hua
| Taonga | Ngā Taipitopito Hua |
|---|---|
| Ingoa Hua | Pae maitai taputapu mahi wera tino pai H13 EFS |
| Tau | H13 / 1.2344 / SKD61 |
| Tohu UNS / EN | UNS T20813 / X40CrMoV5-1 |
| Whānau Rauemi | Te maitai taputapu mahi wera |
| Āhua Hua | Pae porowhita me te pae whakairo |
| Awhe Rahi | Ngā diameters auau me ngā diameters ritenga mā te tono |
| Roa | 1000–6000 mm, tapahia rānei kia rite ki te roa |
| Whakaotinga Mata | Mangu, tihoretia, hurihia, hurihia |
| Āhua Tukunga | Ka whakawerahia, ka whakamahanatia rānei ina tohua |
| Paerewa | ASTM A681 / DIN EN ISO 4957 |
| Manawanui | Mira, h9, h11, tuhi motuhake rānei |
| Ngā Ratonga e Wātea ana | Te tapahi, te tihore, te huri, te huri, te miihini |
| Ngā Tiwhikete | WhM, EN 10204 3.1, purongo ahu |
Te Hanganga Matū
He maitai taputapu mahi wera te H13, he chromium-molybdenum-vanadium. Mā tōna taurite koranu ka mārō, ka kaha te wera, ka pakari, ka ātete hoki ki te ngenge wera i roto i ngā taputapu mahi wera. Ko ngā uara e whai ake nei he awhe tohutoro noa; ka rerekē pea ngā rohe tuturu i runga i te putanga paerewa me ngā whakaritenga a te kiritaki.
| Huānga | Ngā Ihirangi Tohutoro Noa | Mahi Hangarau |
|---|---|---|
| Waro | Tata ki te 0.32–0.45% | Ka whakarato i te pakari me te mārō mahi |
| Konupora | Tata ki te 4.75–5.50% | Whakapai ake i te pakari me te mahi wera |
| Molibdenuma | Tata ki te 1.10–1.75% | Tautoko ana i te ātete ki te wera me te kaha ki te wera |
| Vanadium | Tata ki te 0.80–1.20% | Ka whakapai ake i te kakano, ka whakapai ake i te ātete ki te kakahu |
| Hiraka | Tata ki te 0.80–1.20% | Tautoko ana i te ātete waikura me te kaha o te matrix |
| Manganēhi | Tata ki te 0.20–0.50% | Tautoko ana i te whakahaere rewa me te whakapakeketanga |
| Whēkau | Te mōrahi whakahaere | He herenga hei tautoko i te pakari |
| Whāriki | Te mōrahi whakahaere | He mea whakawhāiti hei whakawhāiti i ngā whakaurunga me te whakapai ake i te pono o te taputapu |
| Rino | Taurite | Matū whakarewa turanga |
Me whakaū te hanganga matū tuturu e ngā whakatakotoranga hua e tika ana me te MTC.
Ngā Āhuatanga Ā-Mīhini me te Pāmahana-Teitei
Ko ngā āhuatanga hangarau me ngā āhuatanga ratonga o te pae maitai taputapu H13 EFS Super Fine e whakawhirinaki ana ki te diameter, te ara rewa, te maimoatanga wera, te pakeke mahi, te ahunga whakamātautau me te pāmahana ratonga. Ko ngā uara i raro nei he tohutoro noa, kaua e whakakapi i ngā hua MTC motuhake-tono, i ngā hua maimoatanga wera rānei.
| Taonga | Tohutoro Noa | Āhua | Te Tikanga o te Hangarau |
|---|---|---|---|
| Te pakeketanga kua whakawerahia | I raro iho i te 229 HB te nuinga o te wā | Pae kua whakawerahia | Whakapai ake i te ngāwari o te mīhini i mua i te whakapakeketanga |
| Te Pakari o te Mahi | Mō te 44–52 HRC tohutoro | I whakapakeketia, i whakamakukutia | I tīpakohia kia rite ki te tono mo te mate |
| Ātete ki te Ngenge Wera | He pai mō ngā taputapu mahi wera | Te whakamahana me te whakamatao anō | Āwhina ki te ātete i te wera o ngā mate |
| Kaha Wera | He pai te pupuri i muri i te whakamakuku | E whakawhirinaki ana ki te tono | He whai hua mō te whakarewatanga mate me te taputapu whakaputa |
| Te pakari | Kua whakapaitia mā te hanganga kua whakatikatikaina | Kounga EFS / Super Fine ina tohua | Tautoko ana i te ātete ki te pakaru i roto i ngā taputapu nui |
| Kiato | Te tohutoro mō te 7.8 g/cm³ | Te pāmahana rūma | Whakamahia mō te tatau i te taumaha pae |
| Te Pāmahana Whakamārō | Te tohutoro mō te 1010–1030°C | Kei raro i te tikanga maimoatanga wera | Me whakahaere mā te tikanga whai mana |
| Awhe Whakamahana | Te tohutoro mō te 540–620°C | I muri i te whakapakeketanga | Ka whakarerekē i te pakeke, te pakari me te ātete wera |
Ripanga Rahi Noa
| Diameter | Roa | Mata | Te tukatuka | Te Whakamahinga Noa |
|---|---|---|---|---|
| Ø10–30 mm | 1000–6000 mm | Kua tihoretia, kua hurihia rānei | Te tapahi me te huri | Ngā patu wera me ngā pine taputapu |
| Ø35–80 mm | 2000–6000 mm | Kua tihorea, kua hurihia rānei | Tahua mīhini | Ngā mandrel me ngā toki taputapu |
| Ø85–160 mm | Te roa o te tapahi ritenga | Hurihuri rawa | I tapahia, i mīhinihia rānei | Ngā wāhanga o te mate maka-mate |
| Ø165–300 mm | Hangaia kia rite ki te tono | I whakapūmautia, ā, i hurihia | UT ina tohua | Ngā taputapu mahi wera nui |
| Neke atu i te Ø300 mm | Kaupapa motuhake | I whakapūmautia, i mīhinitia rānei | Me arotake hangarau | Ngā poraka mate taumaha me ngā whakaurunga |
Whakataurite i ngā Whakatakotoranga Rerekē
Te Whakataurite i te Mata o te Pae Porowhita me te Hanganga
| Āhua | Āhuatanga Matua | Te Whakamahinga i Manakohia | Tohutohu Hoko |
|---|---|---|---|
| Pae Hurihia Wera | Mata mira ōhanga | Te miihini taratara | Tauwhāitihia te tahua miihini |
| Pae Whakarewa | He pai mō ngā wāhanga nunui | Ngā mate taumaha me ngā papa taputapu | Ka taea te tohu i te ōwehenga UT me te ōwehenga hanga |
| Pae EFS / Tino Pai | He hanganga kua whakapaia, he horoi kua whakapaia | Ngā taputapu whakarewa mate me te whakaputanga nui | Whakaūtia te ara rewa me te taumata tirotiro |
| Pae Kua Tihoretia | Mata kore-tauine | Mīhini CNC | Ka whakaiti i te whakarite o te mata |
| Pae Whenua | Te manawanui pakari me te mutunga maeneene | Ngā wāhanga taputapu tino tika | Āhua h9, h8, manawanui tuhi rānei |
Te Whakataurite ki ngā Rino Utauta Mahi Wera e Pā Ana
| Tau | Kaha Matua | Te Herenga Whānui | Kōwhiringa Noa |
|---|---|---|---|
| H11 / 1.2343 | He pakari pai me te ātete ki te wera | Taurite koranu rerekē mai i te H13 | Ngā taputapu mahi wera whānui e hiahia ana kia pakari |
| H13 / 1.2344 | Te pakari taurite, te kaha wera me te ātete ki te tirotiro wera | Me whai maimoatanga wera whakahaere kia roa ai te ora ratonga | Ngā taputapu whakarewa mate, whakaputa me te hanga |
| H13 ESR / EFS | Kua whakapaitia te ma me te isotropy ina tohua | He nui ake te utu i te H13 tuku iho | Ngā mate nui me ngā taputapu ratonga roa |
| H21 / 1.2581 | Te pakeke whero tungsten teitei | Te rerekētanga o te pakari me te taurite o te kaha miihini | Ngā patu wera motuhake me ngā taputapu mahi wera |
Ngā Paerewa ōrite me ngā Ingoa o te Ao
| Pūnaha | Whakatūnga | Te whanaungatanga |
|---|---|---|
| AISI / ASTM | H13 | Te kounga maitai taputapu mahi wera noa |
| UNS | T20813 | Te tohu UNS mō te maitai momo H13 |
| DIN / W.Nr. | 1.2344 | Tohutoro tau rauemi Tiamana |
| Ingoa EN | X40CrMoV5-1 | Te tohu matū o Ūropi |
| JIS | SKD61 | Tohutoro whakawhiti Hapanihi |
| Tohutoro Hainamana | 4Cr5MoSiV1 | Te tohutoro maitai taputapu mahi wera Hainamana noa |
| Paerewa Hua | ASTM A681 / DIN EN ISO 4957 | Ngā tohutoro whakatakotoranga maitai taputapu |
Rere o te Tukanga Whakaputa
Ka tīpakohia ngā rauemi whakarewa i runga anō i te matū H13 e hiahiatia ana.
Ka whakahaerehia te matū, te ma me ngā huānga toenga i te wā e rewa ana.
Tērā pea me whakaaetia te whakamahine, te horoi, te whakahaere hanganga rānei mō te kounga EFS / Super Fine.
Ka whakawhāititia te rauemi hei pae porowhita, hei pae hanga rānei.
Ka pai ake te mahi miihini i mua i te hanga taputapu whakamutunga mā te whakamahana.
Ka taea te tihore i ngā pae, te huri, te huri, te tapatapahi rānei kia rite ki te rahi.
Ka tirohia ngā ine, te mata, te mārō me ngā tuhinga.
Kua whakaritea te tohu tau-wera me te tākai kaweake.
Tirotiro Hua
| Tirotiro | Tikanga | Kaupapa |
|---|---|---|
| Tātari Matū | Te tātari taiwhanga, te arotake MTC rānei | Whakaū i te matū H13 / 1.2344 |
| PMI | Te tautuhi rauemi pai | E wātea ana ina tohua; ehara i te mea hei whakakapi mō te matū katoa |
| Whakamātautau Pakari | Whakamātautau HB, HRC rānei e tika ana | Whakaūtia te āhua kua whakamahanatia, kua tukatukahia rānei |
| Tirotiro Ahu | Te matawai i te caliper, te micrometer me te roa | Manatokohia te whānui, te roa me te manawanui |
| Tirotiro Mata | Arotake tirohanga me te whakaotinga | Tirohia ngā kapiti, te unahi, ngā takahuri, ngā pakaru rānei |
| Whakamātautau Ultrasonic | UT ina tohua | Aromatawai i te pakari o roto i ngā rahi e tika ana |
| Arotake Hanganga Moroiti | E wātea ana ina tohua | Tautoko ana i te manatoko kounga EFS / Super Fine |
| Arotake Aroturuki | Te manatoko i te tau wera me te tapanga | Honoa te hua ki te MTC me te EN 10204 3.1 |
Tākai Hua
Ka taea te tiaki i ngā pae ki te hinu, ki te pepa VCI, ki te kiriata, ki te takai ā-wai rānei.
Ka whakaitihia te nekehanga me te rakuraku e ngā whitiki rino, ngā wehewehe me ngā whakakī.
Ka taea e ngā pae whenua, ngā pae mīhini rānei te whiwhi taupoki pito, te tiaki whakakī rānei.
Ka tīpakohia te tākai kaweake kia rite ki te whānui o te pae, te roa me te taumaha.
Ka taea te pupuri i te tohu, te rahi, te tau wera me ngā tohu tuku a te kiritaki.
Ngā Taupānga, Te Mahi Matua me te Hanganga
Ngā Taupānga Matua
- Ngā mate maka-mate me ngā whakaurunga
- Ngā mate whakaputa konumohe me ngā taputapu whakaputa
- Ngā mate hanga wera me ngā whakauru mate
- Ngā patu wera, ngā mandrel me ngā kaipupuri patu
- Ngā mata kutikuti wera me ngā taputapu kuti
- Ngā pokepoke kirihou e hiahia ana kia tino orohia, kia pumau hoki te pāmahana, ina tohua
Mahi Matua
He whānuitia te whakamahinga o te H13 nā te mea he pai te whakakotahitanga o te pakari, te kaha wera, te ātete ki te ngenge wera me te ātete ki te whakangawari. He tino whai hua te kounga EFS / Super Fine ina hiahiatia he hanganga kua whakatikatikaina me te whakapai ake i te ma mō ngā taputapu tino nui.
Te āheinga ki te mīhini
He pai te ngāwari o te miihini i te āhua whakamahana. Ko te hurihanga nui, te mira, te keri me te miihini taratara ka oti i mua i te whakapakeketanga me te whakamahana. Ko ngā pae whenua, ngā pae tihore rānei ka āwhina i te whakaiti i te whakarite o te mata i mua i te miihini CNC.
Te Maimoatanga Wera
Ko te tikanga, ka tukuna te H13 kua whakamahanahia i mua i te miihini, kātahi ka whakapakeketia, ka whakamahanatia ki te pakeketanga mahi e hiahiatia ana. Me whiriwhiri te maimoatanga wera i runga i te rahi o te wāhanga, te āhua o te mate, te pakeketanga whāinga, te pāmahana mahi me te kawenga pānga e tumanakohia ana.
Te whakarewa me te whakatika
Tērā pea ka taea te whakatika i te whakarewa mā te whakamahi i tētahi tikanga whai mātauranga, te whakamahana tika i mua, te whakarewa whakakī e tika ana, me te maimoatanga wera i muri i te whakarewatanga. Mō ngā whakarewa tākai, whakarewa tākai rānei e tino hiahiatia ana, me whai whakaaro ngā whakataunga whakatika ki te mōrearea o te pakaru, te whakawhiti pakeke me te roa o te mahi.
He aha i whiriwhiri ai i a SAKY STEEL?
Ka taea te whakarato i te diameter, te roa, te whakaotinga mata me te tahua miihini e ai ki ngā tuhi.
Ka taea te pupuri i te tautuhi rauemi mai i te tuhinga tae noa ki te tākai whakamutunga.
Ka taea te whakarato i te MTC (Mill Test Certificate / 质保书) e ai ki te ota hoko.
Kei te wātea ngā tuhinga EN 10204 3.1 ina tohua i roto i te ota.
Ka taea te whakarite i te arotake i te pakeke, te whānuitanga, te PMI, te UT me te hanganga moroiti ina tohua.
Ka taea te whakarite i ngā paihere, ngā pouaka rakau, ngā papa me ngā tohu tuku kiritaki.
Ngā Pātai Auau
He aha te maitai taputapu H13 EFS Super Fine?
Ko te H13 EFS Super Fine he pae maitai taputapu mahi wera H13 kua whakaratohia me te hanganga kua whakatikatikaina, te kounga kua whakareihia rānei. Me whakaū te tikanga tuturu o te EFS e ngā whakaritenga hangarau kua whakaaetia, pēnei i te ara rewa, te rahi o te witi, te ma, te taumata UT, te whakahaere hanganga moroiti rānei.
He rite tonu te H13 ki te DIN 1.2344 me te SKD61?
He mea noa te whakawhiti i te H13 ki te DIN 1.2344 me te JIS SKD61. Heoi anō, me tirotiro tonu te ōritetanga whakamutunga mā te hanganga matū, te whakaritenga maimoatanga wera, te pakeke, ngā paearu tirotiro me te paerewa whakahaere.
He aha te paerewa e pā ana ki te pae maitai taputapu H13?
Ko te ASTM A681 te mea e whakamahia whānuitia ana mō te maitai taputapu AISI H13, ko te DIN EN ISO 4957 ia ka taea te whakamahi mō te DIN 1.2344 / X40CrMoV5-1. Me whakamārama te ota hoko i te paerewa me te whakatikatika e hiahiatia ana.
He aha te painga o te EFS, te Super Fine H13 rānei?
Ko te EFS, Super Fine H13 rānei, he mea hanga hei whakarato i tētahi hanganga kua oti te whakapai ake, me te pono ake mō ngā taputapu mahi wera uaua. He tino whai hua tēnei ina me ātete te taputapu ki te tirotiro wera, ki te pakaru me te huringa wera auau.
Ka taea te tuku mai i te pae H13 EFS kua hurihia, kua tihorea rānei?
Āe. Ka taea te matapaki i ngā mata pango, ngā mata kua tihoretia, ngā mata kua hurihia me ngā mata kua hurihia kia rite ki te whānui, te manawanui me ngā whakaritenga miihini whakamutunga. He pai ngā pae whenua ina hiahiatia he whakahaere whānui ake, he whakapai ake rānei i te whakaotinga mata.
Kei te wātea ngā whakamātautau ultrasonic mō ngā pae H13 EFS?
Ka taea te whakarite i te UT mō ngā diameter pae e tika ana me ngā pae hanga ina tohua. Me tautuhi te ota i te tikanga whakamātautau, te taumata whakaae me te whakaritenga pūrongo.
Ka taea te whakarato i te MTC me te EN 10204 3.1?
Ka taea e SAKY STEEL te whakarato i ngā tuhinga MTC me EN 10204 3.1 e ai ki te ota hoko. Ka taea hoki te whakarite i ngā pūrongo mō te pakeke, te whānuitanga, te PMI, te UT, te hanganga moroiti rānei ina tohua.
