Pae Rino Utauta Mahi Matao DC53 DIN 1.2360
Whakaahuatanga Poto:
Ko te pae maitai taputapu mahi makariri DC53 DIN 1.2360 e tuku ana i te pakeke teitei, te pakari pai ake me te ātete ki te kakahu mō ngā mate tika, ngā patu me ngā taputapu hanga makariri. Kei te wātea te diameter ritenga, te mata, te tapahi, te UT, te MTC me te EN 10204 3.1.
Ko te Pae Rino Utauta Mahi Matao DC53 DIN 1.2360 he pae rino taputapu mahi matao mahi teitei e tukuna ana mō ngā mate tika, ngā patu, ngā taputapu hanga matao, ngā mate whakakore, ngā mate tā, ngā mata kutikuti me ngā wāhanga taputapu e hiahia ana kia pakeke teitei, kia pakari ake, kia ātete hoki ki te kakahu. E whakamahia whānuitia ana te DC53 hei maitai mate mahi matao whakapai ake, ko te rauemi momo DIN 1.2360 / X48CrMoV8-1-1 e hono ana ki ngā tono maitai taputapu mahi matao koranu-waenga.
Ka tukuna e SAKY STEEL te pae maitai taputapu momo DC53 / 1.2360 i roto i te āhua kua whakamahanatia, kua hurihia weratia, kua whakapūmautia, kua tihoretia, kua hurihia, kua hurihia rānei, kia rite ki ngā whakaritenga o te hoko. Ko ngā ratonga e wātea ana ko te tapahi, te tihoretia, te huri, te huri, te miihini taratara, te tirotiro i ngā āhuatanga, te whakamātautau pakeke, te whakamātautau ultrasonic ina tohua, ngā tuhinga MTC me EN 10204 3.1.
Ngā Tawhā Hua
| Taonga | Ngā Taipitopito Hua |
|---|---|
| Ingoa Hua | Pae Rino Utauta Mahi Matao DC53 DIN 1.2360 |
| Tau | Momo DC53 / DIN 1.2360 / maitai kua whakarerekētia Cr8 |
| Tohu DIN / EN | 1.2360 / X48CrMoV8-1-1 tohutoro |
| Whānau Rauemi | Rino taputapu mahi makariri |
| Āhua Hua | Pae porowhita me te pae whakairo |
| Awhe Rahi | Ngā diameters auau me ngā diameters ritenga mā te tono |
| Roa | 1000–6000 mm, tapahia rānei kia rite ki te roa |
| Whakaotinga Mata | Mangu, tihoretia, hurihia, hurihia |
| Āhua Tukunga | Ka whakawerahia, ka whakamahanatia rānei ina tohua |
| Paerewa | DIN EN ISO 4957 / ASTM A681 tohutoro |
| Manawanui | Mira, h9, h11, tuhi motuhake rānei |
| Ngā Ratonga e Wātea ana | Te tapahi, te tihore, te huri, te huri, te miihini |
| Ngā Tiwhikete | WhM, EN 10204 3.1, purongo ahu |
Te Hanganga Matū
Ko te DC53 e kiia whānuitia ana he maitai mate mahi makariri kua whakarerekētia i te raupapa Cr8 me te molybdenum me te vanadium kua tāpirihia hei whakapai ake i te pakeke, te pakari me te ātete ki te kakahu. He rerekē te tohu paerewa o te DIN 1.2360 / X48CrMoV8-1-1, ā, me manatoko ki te whakatakotoranga hoko whakamutunga. Kei te ripanga e whai ake nei te matū tohutoro noa mō te matapakinga kōwhiringa rauemi.
| Huānga | Ngā Ihirangi Tohutoro Noa | Mahi Hangarau |
|---|---|---|
| Waro | Tata ki te 0.90–1.05% | Ka whakarato i te pakeke me te ātete ki te kakahu i muri i te maimoatanga wera |
| Konupora | Tata ki te 7.50–8.50% | Whakapai ake i te pakari me te ātete ki te kakahu |
| Molibdenuma | Tata ki te 1.80–2.30% | Tautoko ana i te ātete ki te āhua o te wera me te whakapakeketanga tuarua |
| Vanadium | Tata ki te 0.20–0.40% | Ka whakapai ake i ngā karawiti me te ātete ki te kakahu |
| Hiraka | Tata ki te 0.80–1.10% | Tautoko i te kaha me te urupare whakamātao |
| Manganēhi | Tata ki te 0.30–0.50% | Tautoko ana i te whakapakeketanga me te whakahaere rewa |
| Whēkau | Te mōrahi whakahaere | He herenga hei tautoko i te pakari |
| Whāriki | Te mōrahi whakahaere | He mea whakawhāiti hei whakawhāiti i ngā whakaurunga me te whakapai ake i te pono o te taputapu |
| Rino | Taurite | Matū whakarewa turanga |
Me whakaū te hanganga matū tuturu e ngā whakatakotoranga hua e tika ana me te MTC.
Ngā Āhuatanga Maimoatanga Ā-Mīhini me te Maimoatanga Wera
Ko ngā āhuatanga hangarau o te pae maitai taputapu mahi matao DC53 e whakawhirinaki ana ki te diameter, te maimoatanga wera, te pāmahana whakamahana, te ahunga whakamātautau, te pakeke mahi me te āhua o te taputapu. Ko ngā uara e whai ake nei he tohutoro noa mō te matapaki hangarau, ā, kaua e whakakapi i ngā rekoata MTC motuhake-tono, maimoatanga wera rānei.
| Taonga | Tohutoro Noa | Āhua | Te Tikanga o te Hangarau |
|---|---|---|---|
| Te pakeketanga kua whakawerahia | I raro iho i te 255 HB te nuinga o te wā | Pae kua whakawerahia | Tautoko i te miihini i mua i te whakapakeketanga |
| Te Pakari o te Mahi | Mō te 60–63 HRC tohutoro | I whakapakeketia, i whakamakukutia | Whakamahia mō ngā mate me ngā patu tika |
| Te pakari | He pai ake te whakataurite ki te maitai momo D2 tuku iho | Te maimoatanga wera tika | Āwhina ki te whakaiti i te mōrearea o te pakaru me te pakaru |
| Ātete Kakahu | Teitei mō ngā taputapu mahi makariri | Āhua whakapakeke | Tautoko ana i te whakakore, te hanga me te tā i ngā mate |
| Te Pūmautanga o te Ahu | He pai te maimoatanga wera whakahaere | Kua tineia, kua whakamahanatia | He mea nui mō ngā taputapu tika |
| Whakautu EDM | He maha ngā wā ka tīpakohia hei whakapai ake i te pono o muri i te EDM | Tei runga i te tukanga | He mea nui tonu te maimoatanga mata whakamutunga |
| Kiato | Te tohutoro mō te 7.8 g/cm³ | Te pāmahana rūma | Whakamahia mō te tatau i te taumaha pae |
| Āhua o te Ratonga | Te whakamahinga o te mahi makariri | Te pāmahana ā-taiao, te pāmahana waenga rānei | Kāore i te whakaarohia hei rino mahi wera |
Ripanga Rahi Noa
| Diameter | Roa | Mata | Te tukatuka | Te Whakamahinga Noa |
|---|---|---|---|---|
| Ø10–30 mm | 1000–6000 mm | Kua tihoretia, kua hurihia rānei | Te tapahi me te huri | Ngā pū me ngā pine iti |
| Ø35–80 mm | 2000–6000 mm | Kua tihorea, kua hurihia rānei | Tahua mīhini | Ngā pū, ngā whakaurunga me ngā wāhanga mate |
| Ø85–160 mm | Te roa o te tapahi ritenga | Hurihuri rawa | I tapahia, i mīhinihia rānei | Ngā wāhanga mate hanga matao |
| Ø165–300 mm | Hangaia kia rite ki te tono | I whakapūmautia, ā, i hurihia | UT ina tohua | Ngā papa taputapu nui |
| Neke atu i te Ø300 mm | Kaupapa motuhake | I whakapūmautia, i mīhinitia rānei | Me arotake hangarau | Ngā taputapu mahi makariri taumaha |
Whakataurite i ngā Whakatakotoranga Rerekē
Te Whakataurite i te Mata o te Pae Porowhita me te Hanganga
| Āhua | Āhuatanga Matua | Te Whakamahinga i Manakohia | Tohutohu Hoko |
|---|---|---|---|
| Pae Hurihia Wera | Mata mira ōhanga | Te miihini taratara | Tauwhāitihia te tahua miihini |
| Pae Whakarewa | He pai mō ngā wāhanga nunui ake | Ngā taputapu taumaha | Ka taea te tono UT |
| Pae Kua Tihoretia | Mata kore-tauine | Mīhini CNC | Ka whakaiti i te whakarite o te mata |
| Pae Tahuri | Te tahua diameter whakahaere | Ngā papa taputapu | Whakaūtia te rahi mīhini whakamutunga |
| Pae Whenua | Te manawanui pakari me te mutunga maeneene | Ngā mate me ngā patu tika | Āhua h9, h8, manawanui tuhi rānei |
Te Whakataurite ki ngā Rino Utauta Mahi Matao e Pā Ana
| Tau | Kaha Matua | Te Herenga Whānui | Kōwhiringa Noa |
|---|---|---|---|
| DC53 | Te pakeke teitei me te pakari kua whakapaitia | Me whai maimoatanga wera whakahaere | Ngā mate tika, ngā poka me ngā taputapu hanga |
| D2 / 1.2379 | Te ātete kakahu teitei | He iti ake te pakari i te DC53 i roto i te maha o ngā tono mate | Ngā taputapu whakakorekore me te mau mō te wā roa |
| A2 / 1.2363 | Te whakapakeketanga o te hau me te pumau o ngā āhuatanga | Te taurite rerekē o te kakahu me te pakari | Ngā taputapu tino tika e hiahia ana kia whakapakeketia te hau |
| O1 / 1.2510 | He pai te āheinga miihini me te urupare whakapakeke hinu | He iti ake te ātete ki te kakahu i ngā momo whai rawa i te Cr | Ngā patu whānui, ngā ine me ngā taputapu tapahi |
Ngā Paerewa ōrite me ngā Ingoa o te Ao
| Pūnaha | Whakatūnga | Te whanaungatanga |
|---|---|---|
| Taumata Tauhokohoko | DC53 | Te kōeke maitai o te mate mahi makariri kua whakarerekētia |
| DIN / W.Nr. | 1.2360 | Tohutoro maitai taputapu mahi makariri e pā ana |
| Ingoa EN | X48CrMoV8-1-1 | Te tohu noa mō te maitai momo DIN 1.2360 |
| Whānau Rauemi | Rīwai taputapu mahi makariri Cr8 | Tohutoro whānau whānui |
| Paerewa Hua | DIN EN ISO 4957 | Tohutoro whakatakotoranga maitai taputapu |
| Tohutoro ASTM | ASTM A681 | Tohutoro maitai taputapu koranu, ehara i te tohu DC53 tuturu |
Rere o te Tukanga Whakaputa
Ka tīpakohia ngā rauemi whakarewa i runga anō i te momo matū DC53, 1.2360 rānei e hiahiatia ana.
Ka whakahaerehia te matū, te ma me ngā huānga toenga i te wā e rewa ana.
Ka whakaritea te kounga o te ingot, o te pireti rānei mō te mahi wera me te mahi taputapu i muri mai.
Ka whakawhāititia te rauemi hei pae porowhita, hei pae hanga rānei.
Ka pai ake te mahi miihini i mua i te hanga o te mate whakamutunga mā te whakamahana.
Ka taea te tihore i ngā pae, te huri, te huri, te tapatapahi rānei kia rite ki te rahi.
Ka tirohia ngā ine, te mata, te mārō me ngā tuhinga.
Kua whakaritea te tohu tau-wera me te tākai kaweake.
Tirotiro Hua
| Tirotiro | Tikanga | Kaupapa |
|---|---|---|
| Tātari Matū | Te tātari taiwhanga, te arotake MTC rānei | Whakaū i te matū momo DC53 / 1.2360 |
| PMI | Te tautuhi rauemi pai | E wātea ana ina tohua; ehara i te mea hei whakakapi mō te matū katoa |
| Whakamātautau Pakari | Whakamātautau HB, HRC rānei e tika ana | Whakaūtia te āhua kua whakamahanatia, kua tukatukahia rānei |
| Tirotiro Ahu | Te matawai i te caliper, te micrometer me te roa | Manatokohia te whānui, te roa me te manawanui |
| Tirotiro Mata | Arotake tirohanga me te whakaotinga | Tirohia ngā kapiti, te unahi, ngā takahuri, ngā pakaru rānei |
| Whakamātautau Ultrasonic | UT ina tohua | Aromatawai i te pakari o roto i ngā rahi e tika ana |
| Arotake Aroturuki | Te manatoko i te tau wera me te tapanga | Honoa te hua ki te MTC me te EN 10204 3.1 |
Tākai Hua
Ka taea te tiaki i ngā pae ki te hinu, ki te pepa VCI, ki te kiriata, ki te takai ā-wai rānei.
Ka whakaitihia te nekehanga me te rakuraku e ngā whitiki rino, ngā wehewehe me ngā whakakī.
Ka taea e ngā pae whenua, ngā pae mīhini rānei te whiwhi taupoki pito, te tiaki whakakī rānei.
Ka tīpakohia te tākai kaweake kia rite ki te whānui o te pae, te roa me te taumaha.
Ka taea te pupuri i te tohu, te rahi, te tau wera me ngā tohu tuku a te kiritaki.
Ngā Taupānga, Te Mahi Matua me te Hanganga
Ngā Taupānga Matua
- Ngā mate whakapūmau tika me ngā mate wero
- Ngā mate hanga matao me ngā mate tā
- Ngā mate hurihuri miro me ngā roera hanga
- Ngā mata kutikuti, ngā maripi tapatapahi me ngā taputapu kutikuti
- Ngā whakaurunga mate miihini-EDM me ngā taputapu tika
- Ngā wāhanga mahi matao e hiahia ana ki te pakari me te ātete ki te kakahu
Mahi Matua
He maha ngā wā ka whiriwhiria te DC53 ina hiahia ngā kaiwhakamahi kia nui ake te pakeke o te mahi me te ātete ki te pakaru, ki te whakaritea ki ngā maitai mate waro-teitei tuku iho. He pai mō ngā taputapu tino tika, ina he mea nui te ātete ki te kakahu me te pakari.
Te āheinga ki te mīhini
He pai rawa te mahi miihini i roto i te āhua whakamahana. Ko te hurihanga nui, te mira, te keri me te miihini taratara ka oti i mua i te whakapakeketanga me te whakamahana. Ko ngā pae whenua, ngā pae tihore rānei ka āwhina i te whakaiti i te wā whakarite i mua i te miihini CNC.
EDM me te Whakaoti Mata
He maha ngā wā ka whakamahia te DC53 mō ngā mate tika i hangaia ki te mīhini EDM. Whai muri i te EDM, me whakahaere te paparanga hanga anō, ngā kapiti moroiti me te ahotea o te mata mā te whakakanapa, te whakaiti ahotea, te whakaoti rānei i ngā tikanga e tika ana, e ai ki ngā whakaritenga taputapu.
Te Maimoatanga Wera
Ko te tikanga, ka tukuna te DC53 me te whakamahana i mua i te miihini, kātahi ka whakapakeketia, ka whakamahanatia ki te pakeketanga mahi e hiahiatia ana. Me whiriwhiri ngā tawhā maimoatanga wera i runga i te diameter o te pae, te āhua o te taputapu, te pakeketanga ūnga, te hiahia pakari me te whakahaere whakapōturi.
He aha i whiriwhiri ai i a SAKY STEEL?
Ka taea te whakarato i te diameter, te roa, te whakaotinga mata me te tahua miihini e ai ki ngā tuhi.
Ka taea te pupuri i te tautuhi rauemi mai i te tuhinga tae noa ki te tākai whakamutunga.
Ka taea te whakarato i te MTC (Mill Test Certificate / 质保书) e ai ki te ota hoko.
Kei te wātea ngā tuhinga EN 10204 3.1 ina tohua i roto i te ota.
Ka taea te whakarite i te mārō, te whānuitanga, te tirotiro PMI me te UT ina tohua.
Ka taea te whakarite i ngā paihere, ngā pouaka rakau, ngā papa me ngā tohu tuku kiritaki.
Ngā Pātai Auau
He aha te maitai taputapu mahi makariri DC53?
He maitai mahi matao mahi teitei te DC53, i hangaia mō te pakeketanga teitei, te pakari ake, me te ātete ki te kakahu. He mea whakamahi noa mō ngā mate tika, ngā patu, ngā taputapu hanga matao me ngā wāhanga tā.
He rite tonu te DC53 ki te DIN 1.2360?
Kāore i te katoa. He hononga hono a DC53 me DIN 1.2360 ki ngā tohutoro maitai taputapu mahi makariri, engari kaua e kiia he ōrite tonu. Me whakaū te ota whakamutunga i ngā whakaritenga matū, paerewa, maimoatanga wera me te tirotiro.
He aha te rerekētanga i waenganui i te DC53 me te D2?
He maha ngā wā ka whiriwhiria te DC53 hei whakakapi mō te maitai momo D2 ina hiahiatia he pakari ake me te ātete ki te pakaru. Ka mau tonu te kaha o te D2 ki te ātete ki te kakahu, engari ka taea e te DC53 te tuku i te taurite pai ake o te pakeke, te pakari me te ngāwari ki te miihini i roto i te maha o ngā tono mate.
Ka taea te tuku mai i te pae DC53 kua hurihia, kua tihorea rānei?
Āe. Ka taea te matapaki i ngā mata pango, ngā mata kua tihoretia, ngā mata kua hurihia me ngā mata kua hurihia kia rite ki te whānui, te manawanui me ngā whakaritenga miihini whakamutunga. He pai ngā pae whenua ina hiahiatia he whakahaere whānui ake, he whakapai ake rānei i te whakaotinga mata.
He pai te DC53 mō te tukatuka EDM?
He maha ngā wā ka whakamahia te DC53 mō ngā wāhanga mate tika i hangaia ki te mīhini EDM. I muri i te EDM, me whakaaro ki te whakaoti mata, te oro, te whakaiti rānei i te ahotea hei whakaiti i ngā mōrearea o te paparanga anō me ngā pakaru moroiti.
Kei te wātea te whakamātautau ultrasonic mō ngā pae DC53?
Ka taea te whakarite i te UT mō ngā diameter pae e tika ana me ngā pae hanga ina tohua. Me tautuhi te ota i te tikanga whakamātautau, te taumata whakaae me te whakaritenga pūrongo.
Ka taea te whakarato i te MTC me te EN 10204 3.1?
Ka taea e SAKY STEEL te whakarato i ngā tuhinga MTC me EN 10204 3.1 e ai ki te ota hoko. Ka taea hoki te whakarite i ngā pūrongo mō te pakeke, te whānuitanga, te PMI, te UT rānei ina tohua.
