Pae Porowhita Rino Mahi Matao ASTM A681 O1 DIN 1.2510
Whakaahuatanga Poto:
He pai te ātete ki te kakahu, te pumau o ngā āhuatanga, me te whakapakeke hinu mō ngā patu, ngā mate, ngā ine me ngā taputapu tapahi, te maitai porowhita DIN 1.2510 O1. Kei te wātea ngā momo diameter, mata, tapahi, MTC me te EN 10204 3.1.
Ko te Pae Porowhita Rino Mahi Matao DIN 1.2510 O1 he maitai taputapu mahi matao whakapakeke-hinu e tukuna ana hei pae porowhita mō ngā patu, ngā mate, ngā ine, ngā taputapu tapahi, ngā taputapu whakakore, ngā riimere, ngā poro, ngā maripi me ngā wāhanga taputapu tino tika. E kiia whānuitia ana ko AISI O1, UNS T31501, DIN 1.2510, 100MnCrW4 me JIS SKS3, i runga i te paerewa me te mākete e tika ana.
Ka tukuna e SAKY STEEL te pae porowhita maitai taputapu O1 / 1.2510 i roto i te āhua kua whakamahanatia, kua hurihia weratia, kua whakapūmautia, kua tihoretia, kua hurihia, kua hurihia rānei, kia rite ki ngā whakaritenga o te hoko. Ko ngā ratonga e wātea ana ko te tapahi, te tihoretia, te huri, te huri, te miihini mata, te tirotiro i ngā āhuatanga, te whakamātautau pakeke, ngā tuhinga MTC me te EN 10204 3.1 ina tohua.
Ngā Tawhā Hua
| Taonga | Ngā Taipitopito Hua |
|---|---|
| Ingoa Hua | Pae Porowhita Rino Mahi Matao DIN 1.2510 O1 |
| Tau | O1 / 1.2510 / SKS3 |
| Tohu UNS / EN | UNS T31501 / 100MnCrW4 |
| Whānau Rauemi | Rino taputapu mahi makariri whakapakeke-hinu |
| Āhua Hua | Pae porowhita me te pae porowhita hanga |
| Awhe Rahi | Ngā diameters auau me ngā diameters ritenga mā te tono |
| Roa | 1000–6000 mm, tapahia rānei kia rite ki te roa |
| Whakaotinga Mata | Mangu, tihoretia, hurihia, hurihia |
| Āhua Tukunga | Ka whakawerahia, ka whakamahanatia rānei ina tohua |
| Paerewa | ASTM A681 / DIN EN ISO 4957 |
| Manawanui | Mira, h9, h11, tuhi motuhake rānei |
| Ngā Ratonga e Wātea ana | Te tapahi, te tihore, te huri, te huri, te miihini |
| Ngā Tiwhikete | WhM, EN 10204 3.1, purongo ahu |
Te Hanganga Matū
He maitai taputapu mahi matao te O1 / 1.2510, he mea hanga ki te manganese-chromium-tungsten. He nui te mārō o tōna ihirangi waro i muri i te whakamahana, ā, mā te manganese, te chromium me te tungsten ka pai ake te mārō, te ātete ki te kakahu me te pumau o ngā āhuatanga i te wā e tinei ana te hinu.
| Huānga | Ngā Ihirangi Tohutoro Noa | Mahi Hangarau |
|---|---|---|
| Waro | Tata ki te 0.85–1.05% | He nui te pakeke me te ātete ki te kakahu |
| Manganēhi | Tata ki te 1.00–1.40% | Whakapai ake i te pakari me te urupare ki te tinei hinu |
| Konupora | Tata ki te 0.40–0.70% | Whakapai ake i te pakari me te ātete ki te kakahu |
| Tungsten | Tata ki te 0.40–0.70% | Tautoko ana i te ātete ki te kakahu me te pupuri i ngā taha |
| Hiraka | Tata ki te 0.15–0.50% | Tautoko i te tango waikura me te kaha o te matrix |
| Vanadium | Tāpiri iti whakahaeretia | Tērā pea ka whakapai ake i te witi, ā, ka tautoko i te ātete ki te kakahu |
| Whēkau | Te mōrahi whakahaere | He herenga hei tautoko i te pakari |
| Whāriki | Te mōrahi whakahaere | He herenga hei whakawhāiti i ngā whakaurunga |
| Rino | Taurite | Matū whakarewa turanga |
Me whakaū te hanganga matū tuturu e ngā whakatakotoranga hua e tika ana me te MTC.
Ngā Āhuatanga Maimoatanga Ā-Mīhini me te Maimoatanga Wera
Ko ngā āhuatanga hangarau o te pae porowhita maitai taputapu O1 e whakawhirinaki ana ki te diameter, te maimoatanga wera, te reo tinei, te pāmahana whakamahana, te pakeke mahi me te āhua whakamātautau. Ko ngā uara e whai ake nei he tohutoro noa iho, kaua e whakakapi i ngā hua MTC motuhake-ota, i ngā hua maimoatanga wera rānei.
| Taonga | Tohutoro Noa | Āhua | Te Tikanga o te Hangarau |
|---|---|---|---|
| Te pakeketanga kua whakawerahia | I raro iho i te 229 HB te nuinga o te wā | Pae kua whakawerahia | Whakapai ake i te ngāwari o te mīhini i mua i te whakapakeketanga |
| Te Pakari o te Mahi | Mō te 58–64 HRC tohutoro | I whakapakeketia, i whakamakukutia | Whakamahia mō te tapahi, te wero me ngā taputapu ine |
| Te Pāmahana Whakamārō | Te tohutoro mō te 780–820°C | Kei raro i te tikanga | Ko te whakamātao hinu te tikanga e whakamahia ana |
| Awhe Whakamahana | Tata ki te 150–250°C mō te pakeketanga teitei | I muri i te whakapakeketanga | Ka whakarerekē i te taurite o te mārō me te pakari |
| Te Pūmautanga o te Ahu | He pai mō te taumata whakapakeke hinu | Te maimoatanga wera tika | He whai hua mō ngā taputapu tino tika |
| Ātete Kakahu | He pai mō ngā taputapu mahi makariri | Āhua whakapakeke | Tautoko ana i ngā tapa tapahi me te hanga i ngā mate |
| Kiato | Tata ki te 7.85 karamu/cm³ | Te pāmahana rūma | Whakamahia mō te tatau i te taumaha pae |
| Āhua o te Ratonga | Te whakamahinga o te mahi makariri | Te pāmahana ā-taiao, te pāmahana waenga rānei | Kāore i te whakaarohia hei rino mahi wera |
Ripanga Rahi Noa
| Diameter | Roa | Mata | Te tukatuka | Te Whakamahinga Noa |
|---|---|---|---|---|
| Ø6–25 mm | 1000–6000 mm | Hurihia, tihoretia rānei | Te tapahi me te huri | Ngā pine, ngā patu iti me ngā taputapu |
| Ø26–80 mm | 2000–6000 mm | Kua tihorea, kua hurihia rānei | Tahua mīhini | Ngā patu, ngā mate me ngā ine |
| Ø85–160 mm | Te roa o te tapahi ritenga | Hurihuri rawa | I tapahia, i mīhinihia rānei | Ngā wāhanga mate nui ake |
| Ø165–250 mm | Hangaia kia rite ki te tono | I whakapūmautia, ā, i hurihia | UT ina tohua | Ngā papa taputapu me ngā wāhanga taumaha |
| Neke atu i te Ø250 mm | Kaupapa motuhake | I whakapūmautia, i mīhinitia rānei | Me arotake hangarau | Ngā taputapu mahi makariri motuhake |
Whakataurite i ngā Whakatakotoranga Rerekē
Te Whakataurite i te Mata o te Pae Porowhita me te Hanganga
| Āhua | Āhuatanga Matua | Te Whakamahinga i Manakohia | Tohutohu Hoko |
|---|---|---|---|
| Pae Hurihia Wera | Mata mira ōhanga | Te miihini taratara | Tauwhāitihia te tahua miihini |
| Pae Whakarewa | He pai mō ngā wāhanga nunui ake | Ngā taputapu taumaha | Ka taea te tono UT |
| Pae Kua Tihoretia | Mata kore-tauine | Mīhini CNC | Ka whakaiti i te whakarite o te mata |
| Pae Tahuri | Te tahua diameter whakahaere | Ngā papa taputapu | Whakaūtia te rahi mīhini whakamutunga |
| Pae Whenua | Te manawanui pakari me te mutunga maeneene | Ngā taputapu me ngā ine tika | Āhua h9, h8, manawanui tuhi rānei |
Te Whakataurite ki ngā Rino Utauta Mahi Matao e Pā Ana
| Tau | Kaha Matua | Te Herenga Whānui | Kōwhiringa Noa |
|---|---|---|---|
| O1 / 1.2510 | He pai te mahi miihini me te pumau o te whakapakeke hinu | He iti ake te ātete ki te kakahu i ngā momo waro-teitei | Ngā pū, ngā ine, ngā taputapu tapahi me ngā mate |
| O2 / 1.2842 | Te momo mahi makariri whakapakeke-hinu māmā | Te rerekētanga o te taurite o te koranu me te ātete ki te kakahu | Ngā taputapu mahi matao whānui |
| D2 / 1.2379 | Te ātete kakahu teitei | He iti ake te kaha ki te miihini me te pakari i te O1 | Ngā taputapu whakakorekore me te mau mō te wā roa |
| A2 / 1.2363 | Te whakapakeketanga o te hau me te pumau pai | He rerekē te tukanga whakapakeke me te utu | Ngā taputapu tino tika e hiahia ana kia whakapakeketia te hau |
Ngā Paerewa ōrite me ngā Ingoa o te Ao
| Pūnaha | Whakatūnga | Te whanaungatanga |
|---|---|---|
| AISI / ASTM | O1 | Te kounga maitai taputapu mahi makariri whakapakeke-hinu |
| UNS | T31501 | Te tohu UNS mō te maitai momo O1 |
| DIN / W.Nr. | 1.2510 | Tohutoro tau rauemi Tiamana |
| Ingoa EN | 100MnCrW4 | Te tohu matū o Ūropi |
| JIS | SKS3 | Tohutoro whakawhiti Hapanihi |
| Tohutoro Hainamana | 9CrWMn | Tohutoro maitai taputapu mahi makariri Hainamana noa |
| Paerewa Hua | ASTM A681 / DIN EN ISO 4957 | Ngā tohutoro whakatakotoranga maitai taputapu |
Rere o te Tukanga Whakaputa
Ka tīpakohia ngā rauemi whakarewa i runga anō i te matū O1 e hiahiatia ana.
Ka whakahaerehia te matū, te ma me ngā huānga toenga i te wā e rewa ana.
Kua rite te kounga o te ingot, o te pireti rānei mō te mahi wera.
Ka whakawhāititia te rauemi hei pae porowhita, hei pae hanga rānei.
Ka pai ake te mahi miihini i mua i te hanga taputapu whakamutunga mā te whakamahana.
Ka taea te tihore i ngā pae, te huri, te huri, te tapatapahi rānei kia rite ki te rahi.
Ka tirohia ngā ine, te mata, te mārō me ngā tuhinga.
Kua whakaritea te tohu tau-wera me te tākai kaweake.
Tirotiro Hua
| Tirotiro | Tikanga | Kaupapa |
|---|---|---|
| Tātari Matū | Te tātari taiwhanga, te arotake MTC rānei | Whakaū i te matū O1 / 1.2510 |
| PMI | Te tautuhi rauemi pai | E wātea ana ina tohua; ehara i te mea hei whakakapi mō te matū katoa |
| Whakamātautau Pakari | Whakamātautau HB, HRC rānei e tika ana | Whakaūtia te āhua kua whakamahanatia, kua tukatukahia rānei |
| Tirotiro Ahu | Te matawai i te caliper, te micrometer me te roa | Manatokohia te whānui, te roa me te manawanui |
| Tirotiro Mata | Arotake tirohanga me te whakaotinga | Tirohia ngā kapiti, te unahi, ngā takahuri, ngā pakaru rānei |
| Whakamātautau Ultrasonic | UT ina tohua | Aromatawai i te pakari o roto i ngā rahi e tika ana |
| Arotake Aroturuki | Te manatoko i te tau wera me te tapanga | Honoa te hua ki te MTC me te EN 10204 3.1 |
Tākai Hua
Ka taea te tiaki i ngā pae ki te hinu, ki te pepa VCI, ki te kiriata, ki te takai ā-wai rānei.
Ka whakaitihia te nekehanga me te rakuraku e ngā whitiki rino, ngā wehewehe me ngā whakakī.
Ka taea e ngā pae whenua, ngā pae mīhini rānei te whiwhi taupoki pito, te tiaki whakakī rānei.
Ka tīpakohia te tākai kaweake kia rite ki te whānui o te pae, te roa me te taumaha.
Ka taea te pupuri i te tohu, te rahi, te tau wera me ngā tohu tuku a te kiritaki.
Ngā Taupānga, Te Mahi Matua me te Hanganga
Ngā Taupānga Matua
- Ngā mate parakore me ngā wero wero
- Ngā mate hanga matao me ngā taputapu kuti
- Ngā taputapu tapahi, ngā maripi me ngā mata kutikuti
- Ngā ine, ngā taputapu ine me ngā wāhanga tika
- Ngā riama, ngā mea whakakoi me ngā taputapu mahi rakau
- Ngā taputapu miro me ngā wāhanga mahi makariri iti
Mahi Matua
E whakanuia ana te O1 mō tōna ngāwari ki te miihini i roto i te āhua whakamahana, te pai o te urupare whakapakeke i roto i te tinei hinu, me te ātete pai ki te kakahu i muri i te whakapakeketanga me te whakamahana. He maha ngā wā ka tīpakohia mō ngā oma whakaputa poto ki te waenga me ngā taputapu tika ina he mea nui te pumau o ngā āhuatanga.
Te āheinga ki te mīhini
He pai te ngāwari o te miihini i mua i te whakapakeketanga. Ko te huri nui, te mira, te keri, te huri me te hanga ka oti i roto i te āhua whakamahana. Tērā pea ka hiahiatia te huri whakamutunga i muri i te maimoatanga wera ina hiahiatia he manawanui pakari, he taha koi rānei.
Te Maimoatanga Wera
Ko te tikanga ka whakamahanahia te O1 i mua i te miihini, kātahi ka whakapakeketia mā te tinei hinu, ā, muri iho ka whakamahanahia ki te pakeke mahi e hiahiatia ana. Me whiriwhiri te tere whakamahana, te wā rumaki, te pāmahana tinei, te pāmahana hinu me te tikanga whakamahana kia rite ki te rahi me te āhua o te taputapu.
Te whakarewa me te whakatika
Ehara te whakarewa i te tikanga whakatika pai mō ngā taputapu O1 kua whakapakeketia nā te mea ka pakaru pea, ka rerekē te pakeketanga. Mena e tika ana te whakarewa, me arotake marietia he tikanga whakatika tika, te whakamahana i mua me te maimoatanga wera i muri i te whakarewa.
He aha i whiriwhiri ai i a SAKY STEEL?
Ka taea te whakarato i te diameter, te roa, te whakaotinga mata me te tahua miihini e ai ki ngā tuhi.
Ka taea te pupuri i te tautuhi rauemi mai i te tuhinga tae noa ki te tākai whakamutunga.
Ka taea te whakarato i te MTC (Mill Test Certificate / 质保书) e ai ki te ota hoko.
Kei te wātea ngā tuhinga EN 10204 3.1 ina tohua i roto i te ota.
Ka taea te whakarite i te mārō, te whānuitanga, te tirotiro PMI me te UT ina tohua.
Ka taea te whakarite i ngā paihere, ngā pouaka rakau, ngā papa me ngā tohu tuku kiritaki.
Ngā Pātai Auau
He aha te maitai taputapu DIN 1.2510 O1?
He maitai taputapu mahi makariri whakapakeke-hinu te DIN 1.2510 O1. E whakamahia ana mō ngā patu, ngā mate, ngā ine, ngā taputapu tapahi me ngā wāhanga taputapu tika e hiahia ana kia pai te ātete ki te kakahu me te pumau o ngā āhuatanga.
He rite tonu a O1 ki a 1.2510 me SKS3?
Ko te O1, te DIN 1.2510 me te JIS SKS3 ngā tohutoro whakawhiti e whakamahia whānuitia ana mō te maitai taputapu mahi matao whakapakeke-hinu. Me whakaū te ōritenga whakamutunga mā te hanganga matū, te maimoatanga wera, te pakeke me ngā whakaritenga tirotiro.
He aha te paerewa e pā ana ki te pae porowhita O1?
Ko te ASTM A681 te mea e whakamahia whānuitia ana mō te maitai taputapu AISI O1, ko te DIN EN ISO 4957 ia ka taea te whakamahi mō te DIN 1.2510 / 100MnCrW4. Me whakamārama te ota hoko i te paerewa me te whakatikatika e hiahiatia ana.
He aha te pakeke ka taea e te maitai taputapu O1 te whakatutuki?
Ko te O1 ka tukuna mā te whakamahana hei whakamahi i te mīhini. I muri i te whakapakeketanga me te whakamahana tika, ka tīpakohia te pakeketanga mahi i roto i te awhe pakeketanga teitei mō ngā patu, ngā mate me ngā taputapu tapahi, i runga anō i te hoahoa taputapu me te mahi whakamahana.
Ka taea te tuku mai i te pae porowhita O1 kua hurihia, kua tihorea rānei?
Āe. Ka taea te matapaki i ngā mata pango, ngā mata kua tihoretia, ngā mata kua hurihia me ngā mata kua hurihia kia rite ki te whānui, te manawanui me ngā whakaritenga miihini whakamutunga. He pai ngā pae whenua ina hiahiatia he whakahaere whānui ake, he whakapai ake rānei i te whakaotinga mata.
He pai te O1 mō ngā mati mahi wera?
Ko te O1 he maitai taputapu mahi makariri te nuinga, ehara i te mea koinei te whiringa tuatahi mō ngā mati mahi wera. Mō ngā mati hanga wera, te maka mate, te whakaputa rānei, ko te H13, H11, H21 me ētahi atu maitai taputapu mahi wera te mea e whakaarohia ana.
Ka taea te whakarato i te MTC me te EN 10204 3.1?
Ka taea e SAKY STEEL te whakarato i ngā tuhinga MTC me EN 10204 3.1 e ai ki te ota hoko. Ka taea hoki te whakarite i ngā pūrongo mō te pakeke, te whānuitanga, te PMI, te UT rānei ina tohua.
