8418 Mea Hana Hana Wela kila poepoe
Wehewehe Pōkole:
ʻO ka ʻaukā poepoe kila hana wela 8418 he kila kila wela kiʻekiʻe Cr-Mo-V me ka nui o ka molybdenum no nā make hoʻolei make, nā mea hana extrusion, nā punch wela a me nā make forging. Loaʻa ke anawaena maʻamau, ka ʻili, ka ʻoki ʻana, UT, MTC a me EN 10204 3.1.
ʻO 8418 Hot Work Tool Steel Round Bar kahi kila hana wela Cr-Mo-V i hoʻolako ʻia no nā make die casting, nā mea hana extrusion wela, nā make forging wela, nā punch wela, nā mandrels, nā mea hoʻokomo, nā cores, nā pine ejector a me nā ʻāpana mea hana wela kiʻekiʻe ʻē aʻe. Ke hoʻohālikelike ʻia me nā kila hana wela ʻano H13 maʻamau, koho pinepine ʻia ʻo 8418 ke koi ʻia ka ikaika wela kiʻekiʻe, ke kūpaʻa luhi thermal i hoʻomaikaʻi ʻia a me ke kūpaʻa maikaʻi i ka palupalu.
Hāʻawi ʻo SAKY STEEL i ka ʻaukā poepoe kila hana wela 8418 a me ka ʻaukā i hoʻoheheʻe ʻia i ke ʻano annealed, hoʻowali wela, hoʻoheheʻe ʻia, ʻili ʻia, huli ʻia a wili ʻia paha e like me nā koi kūʻai. Hiki i nā lawelawe i loaʻa ke komo pū me ka ʻoki ʻana, ka ʻili ʻana, ka huli ʻana, ka wili ʻana, ka mīkini ʻana, ka nānā ʻana i nā ana, ka hoʻāʻo ʻana i ka paʻakikī, ka hoʻāʻo ʻana i ka ultrasonic ke kuhikuhi ʻia, nā palapala MTC a me EN 10204 3.1.
Nā Palena Huahana
| Mea | Nā kikoʻī huahana |
|---|---|
| Inoa Huahana | 8418 Mea Hana Hana Wela kila poepoe |
| Papa | 8418 / Mea Hana Hana Wela Kiʻekiʻe-Mo |
| ʻOhana Mea Hana | Ke kila hana wela o Chromium-molybdenum-vanadium |
| ʻAno Huahana | Kaula poepoe a me ka kaula poepoe i hoʻoheheʻe ʻia |
| Pae Nui | Nā anawaena maʻamau a me nā anawaena maʻamau ma ke kauoha |
| Ka lōʻihi | 1000–6000 mm a ʻokiʻoki paha i ka lōʻihi |
| Hoʻopau ʻili | ʻEleʻele, ʻili ʻia, huli ʻia, wili ʻia, mīkini ʻia |
| Kūlana Hoʻouna | Hoʻopaʻa ʻia a wela ʻia paha i ka wā i kuhikuhi ʻia |
| Kuhikuhi Maʻamau | Nā kikoʻī o ka mea hoʻolako / kuhikuhi ASTM A681 |
| Hoʻomanawanui | Wili, h9, h11 a i ʻole ke kaha kiʻi kikoʻī |
| Nā lawelawe i loaʻa | ʻOki ʻana, ʻili ʻana, huli ʻana, wili ʻana, mīkini ʻāwiliwili, UT i ka wā i kuhikuhi ʻia |
| Nā Palapala Hōʻoia | MTC, EN 10204 3.1, nā hōʻike ana a me ka nānā ʻana |
Hoʻohuihui Kemika
ʻO ka maʻamau, ua mālama ʻia ʻo 8418 ma ke ʻano he kila hana wela Cr-Mo-V kiʻekiʻe-molybdenum. ʻOi aku ka nui o kona ʻike molybdenum ma mua o nā ʻano H13 maʻamau, kahi e kōkua ai i ka hoʻomaikaʻi ʻana i ka ikaika wela, ke kūpaʻa ʻana i ka wela a me ka hana luhi wela. Hāʻawi ka papa ma lalo nei i ka kemika kuhikuhi maʻamau no ke kūkākūkā koho mea.
| ʻElemene | ʻIke Kuhikuhi Maʻamau | Hana ʻenehana |
|---|---|---|
| Kalapona | Ma kahi o 0.32–0.40% | Hāʻawi i ka paʻakikī a me ka paʻakikī hana |
| Chromium | Ma kahi o 4.75–5.20% | Hoʻomaikaʻi i ka paʻakikī a me ke ʻano wela kiʻekiʻe |
| Molibdenum | Ma kahi o 2.30–3.30% | Hoʻomaikaʻi i ka ikaika wela, ke kūpaʻa ʻana i ka huhū a me ke kūpaʻa ʻana i ka luhi wela |
| Vanadium | Ma kahi o 0.40–0.80% | Hoʻomaʻemaʻe i ka palaoa a hoʻomaikaʻi i ke kūpaʻa ʻana i ka ʻaʻahu |
| Silika | Pae i kāohi ʻia | Kākoʻo i ke ʻano oxidation a me ka ikaika matrix |
| Manganese | Pae i kāohi ʻia | Kākoʻo i ka hoʻomalu ʻana i ka heheʻe ʻana a me ka paʻakikī |
| ʻO ka phosphorus | Ka palena kiʻekiʻe i kāohi ʻia | Ua kaupalena ʻia e kākoʻo i ka paʻakikī |
| Sulfur | Ka palena kiʻekiʻe i kāohi ʻia | Ua kaupalena ʻia e kaupalena i nā hoʻokomo a hoʻomaikaʻi i ka hilinaʻi o ka make |
| Hao | Kaulike | ʻO ka ʻōnaehana metala kumu |
Pono e hōʻoia ʻia ka hoʻohui kemika maoli e ka kikoʻī huahana pili a me MTC.
Nā Waiwai Mekanika a me nā Mahana Kiʻekiʻe
ʻO nā waiwai mechanical a me nā lawelawe o ka ʻauamo poepoe kila hana wela 8418 e pili ana i ke anawaena, ka maikaʻi o ka hoʻoheheʻe ʻana, ka mālama wela, ka paʻakikī hana, ke kuhikuhi hoʻāʻo a me ka mahana lawelawe. ʻO nā waiwai ma lalo nei he mau kuhikuhi maʻamau a ʻaʻole pono e pani i nā moʻolelo MTC a i ʻole nā moʻolelo mālama wela.
| Waiwai | Kuhikuhi Maʻamau | Kūlana | Manaʻo ʻenekinia |
|---|---|---|---|
| Paʻakikī i hoʻopaʻa ʻia | ʻO ka maʻamau ma lalo o 229–235 HB | ʻO ka pā i hoʻopaʻa ʻia | Kākoʻo i ka mīkini ma mua o ka paʻakikī ʻana |
| Paʻakikī Hana | Ma kahi o 44–52 HRC kuhikuhi | Paʻakikī a hoʻomaʻamaʻa ʻia | I koho ʻia e like me ke ʻano o ka noi make |
| Ke kū'ē ʻana i ka luhi wela | Kiʻekiʻe no nā mea hana hana wela | Hoʻomehana hou ʻia a hoʻomaʻalili ʻia | Kōkua i ke kū'ē'ana i ka wela i loko o nā make |
| Ikaika Wela | Kiʻekiʻe me ka mālama wela kūpono | Pili i ka noi | He mea pono i ka hoʻolei make, ka hoʻoheheʻe wela a me nā mea hana extrusion |
| Ke kū'ē ʻana i ka palupalu | Hoʻomaikaʻi ʻia e ka ʻike Mo kiʻekiʻe | Ka lawelawe mahana kiʻekiʻe | Kōkua i ka mālama ʻana i ka paʻakikī o ka make i ka wā o ka lawelawe ʻana |
| Paʻakikī | Maikaʻi ke mālama pono ʻia | Ka mālama wela kūpono | Kōkua i ka hōʻemi ʻana i ka pilikia o ka haki ʻana a me ka chipping |
| Ke kū'ē ʻana i ka ʻaʻahu | Maikaʻi i ka mahana kiʻekiʻe | Paʻakikī a hoʻomaʻamaʻa ʻia | Kākoʻo i ke ola make i ka lawelawe hoʻokumu wela |
| Ka nui o ka paʻa | Ma kahi o 7.8 g/cm³ kuhikuhi | Mahana o ka lumi | Hoʻohana ʻia no ka helu ʻana i ke kaumaha o ka pā |
Papa Nui Maʻamau
| Anawaena | Ka lōʻihi | ʻIli | Ka hana ʻana | Hoʻohana Maʻamau |
|---|---|---|---|---|
| Ø10–30 mm | 1000–6000 mm | ʻIli ʻia a wili ʻia paha | ʻOki a me ka wili ʻana | Nā pine ejector, nā ʻiwi a me nā mea hana wela liʻiliʻi |
| Ø35–80 mm | 2000–6000 mm | ʻIli ʻia a huli ʻia paha | ʻAe ʻia ka mīkini | Nā punch wela, nā mea hoʻokomo a me nā ʻau hana |
| Ø85–160 mm | Ka lōʻihi o ke ʻoki maʻamau | Huli ʻino ʻia | ʻOki ʻia a mīkini ʻia paha | Nā ʻāpana hoʻolei make a me ka extrusion |
| Ø165–300 mm | Hana ʻia e like me ke kauoha | I hana ʻia a hoʻohuli ʻia | UT i ka wā i kuhikuhi ʻia | Nā mea hana hana wela nui |
| Ma luna o Ø300 mm | Papahana kikoʻī | I hoʻoheheʻe ʻia a mīkini ʻia paha | Pono ka loiloi loea | Nā make kaumaha a me nā poloka mea hana |
Hoʻohālikelike ʻana i nā kikoʻī like ʻole
Hoʻohālikelike ʻana i ka ʻili poepoe a me ka hana ʻana
| Kūlana | Hiʻohiʻona Nui | Hoʻohana i ʻōlelo ʻia | ʻŌlelo Aʻo Kūʻai |
|---|---|---|---|
| Pā ʻōwili wela | ʻIli wili waiwai | ʻO ka mīkini ʻāwiliwili | E kuhikuhi i ka ʻae ʻana o ka mīkini |
| Pā i hoʻoheheʻe ʻia | Kūpono no nā ʻāpana nui | Make ka hana wela kaumaha | Hiki ke kuhikuhi ʻia ka lakio UT a me ka forging |
| Pā Kūlana Kiʻekiʻe | Hoʻomaikaʻi ʻia ke kūlike i ka wā i kuhikuhi ʻia | Nā make hoʻolei make koʻikoʻi a me nā make extrusion | E hōʻoia i ke koi kūpono pololei ma ke kauoha |
| ʻĀpana i ʻili ʻia | ʻIli ʻole unahi | ʻO ka mīkini CNC | Hoʻemi i ka hoʻomākaukau ʻana o ka ʻili |
| Pā Honua | Hoʻomanawanui paʻa a me ka hoʻopau laumania | Nā ʻāpana mea hana kikoʻī | ʻO ke kūlana h9, h8 a i ʻole ke ahonui kaha kiʻi |
Hoʻohālikelike me nā kila hana hana wela e pili ana
| Papa | Ikaika Nui | Palena Pili | Koho Maʻamau |
|---|---|---|---|
| H13 / 1.2344 | ʻO ke kūpaʻa kaulike, ka ikaika wela a me ke kūpaʻa nānā wela | ʻOi aku ka haʻahaʻa o ka ʻike Mo ma mua o nā kuhikuhi he 8418 | Nā mea hana hoʻolei make, extrusion a me ka forging maʻamau |
| 8407 | Hana ʻano H13 Premium | Pili ka pae maikaʻi i ke koi kauoha | Nā make hoʻolei make koʻikoʻi a me nā mea hana lawelawe kiʻekiʻe |
| 8418 | Hoʻolālā Mo kiʻekiʻe no ka ikaika wela a me ke kūpaʻa palupalu | Pono e hōʻoia ʻia ke kūlike pololei e ka kikoʻī | Nā make hana wela e koi ana, extrusion a me ka lawelawe luhi wela |
| H21 / 1.2581 | Ikaika wela o ka tungsten a me ka paʻakikī ʻulaʻula | ʻOkoʻa ka paʻakikī a me ke kaulike mīkini | Nā punch wela kūikawā a me nā mea hana wela kiʻekiʻe |
Nā Kūlana Kūlike a me nā Inoa Honua
| ʻŌnaehana | Hoʻonohonoho ʻana | Pilina |
|---|---|---|
| Papa Kalepa | 8418 | Kuhikuhi kila hana hana wela kiʻekiʻe-Mo |
| ʻOhana Mea Hana | Ke kila hana wela Cr-Mo-V | Hoʻohana ʻia no nā hana hana wela |
| Papa Pili | Hoʻohālikelike ʻano H13 / 1.2344 | ʻAʻole like like aunoa; hoʻohālikelike ʻia e MTC |
| Kuhikuhi Kūlana Huahana | Kuhikuhi ASTM A681 | Kuhikuhi kikoʻī kila mea hana inā pili |
| Palapala hōʻoia | MTC / EN 10204 3.1 | Hoʻohana ʻia e hōʻoia i ka haku mele maoli a me ka hiki ke hahai ʻia |
Kahe o ke Kaʻina Hana Hana
Ua koho ʻia nā mea hoʻohui e like me ke kemika 8418 i koi ʻia.
Hoʻomalu ʻia ke kemika, ka maʻemaʻe a me nā mea koena i ka wā o ka hana kila.
Hiki ke kūkākūkā ʻia nā koi kūlana kiʻekiʻe a i ʻole nā koi hoʻoheheʻe hou ʻana ke kuhikuhi ʻia.
Hoʻopili ʻia ka mea i loko o ke ʻano poepoe a i ʻole ke ʻano o ka ʻaukā i hoʻoheheʻe ʻia.
Hoʻomaikaʻi ka Annealing i ka machinability ma mua o ka hana ʻana o ka make hope loa.
Hiki ke ʻili ʻia nā ʻauamo, huli ʻia, wili ʻia, mīkini ʻia a ʻokiʻoki ʻia paha i ka nui.
Ua nānā ʻia nā ana, ka ʻili, ka paʻakikī a me ka hiki ke hahai ʻia.
Ua hoʻomākaukau ʻia ka māka helu wela a me ka hoʻopili ʻana i waho.
Nānā Huahana
| Nānā ʻana | ʻAno hana | Kumu |
|---|---|---|
| Ka Nānā Kemika | Ka loiloi keʻena hoʻokolohua a i ʻole ka loiloi MTC | E hōʻoia i ka kemika 8418 |
| PMI | Ka ʻike ʻana i nā mea maikaʻi | Loaʻa i ka wā i kuhikuhi ʻia; ʻaʻole ia he pani no ka kemika piha |
| Hoʻāʻo Paʻakikī | Hoʻāʻo HB a i ʻole HRC e like me ka mea e pili ana | E hōʻoia i ke kūlana annealed a wela paha |
| Nānā Ana | Ka nānā ʻana i ka caliper, micrometer a me ka lōʻihi | E hōʻoia i ke anawaena, ka lōʻihi a me ke ahonui |
| Nānā ʻIli | Nānā maka a me ka hoʻopau ʻana | E nānā i nā māwae, unahi, ʻūhā a i ʻole ka lawelawe ʻana i nā pohō |
| Hoʻāʻo Ultrasonic | UT i ka wā i kuhikuhi ʻia | E loiloi i ke kūpaʻa o loko i nā nui kūpono |
| Loiloi ʻano liʻiliʻi | Loaʻa i ka wā i kuhikuhi ʻia | Kākoʻo i ka hōʻoia ʻana o ka maikaʻi kiʻekiʻe |
| Loiloi Hiki ke Hahai ʻia | Ka hōʻoia ʻana o ka helu wela a me ka lepili | E hoʻopili i ka huahana iā MTC a me EN 10204 3.1 |
Ka Hoʻopili Huahana
Hiki ke pale ʻia nā kaola me ka ʻaila anti-rust, ka pepa VCI, ka ʻiliʻili a i ʻole ka ʻōwili wai ʻole.
ʻO nā kaula kila, nā mea hoʻokaʻawale a me ka padding e hōʻemi i ka neʻe a me ke kahakaha ʻana.
Hiki i nā kaola lepo a mīkini paha ke loaʻa nā pāpale hoʻopau a i ʻole ka pale i hoʻopaʻa ʻia.
Ua koho ʻia ka hoʻopili ʻana i waho e like me ke anawaena o ka ʻaukā, ka lōʻihi a me ke kaumaha.
Hiki ke mālama ʻia ke ʻano, ka nui, ka helu wela a me nā māka hoʻouna o ka mea kūʻai aku.
Nā noi, ka hana koʻikoʻi a me ka hana ʻana
Nā Noi Mua
- Nā make a me nā mea hoʻokomo no ka hoʻoheheʻe ʻana i ka alumini
- Nā make extrusion wela, nā mandrels a me nā liners
- Nā make hana wela a me nā mea hoʻokomo make
- Nā kuʻi wela, nā pahi ʻoki wela a me nā mea hana ʻokiʻoki
- Nā ʻiwi, nā pine ejector, nā nozzles a me nā ʻāpana hoʻolei make
- Nā ʻāpana hana wela e pono ai ke kū'ē i ka palupalu
Hana Koʻikoʻi
Ua waiwai ʻia ʻo 8418 no ka ikaika wela, ke kūpaʻa i ka luhi wela, ke kūpaʻa ʻana i ka huhū, ka paʻakikī a me ke kūpaʻa ʻana i ka palupalu ma ke ana wela kiʻekiʻe. Kōkua kēia mau waiwai i ka hoʻolōʻihi ʻana i ke ola lawelawe mea hana i nā noi die casting, extrusion a me ka forging wela ke hoʻomalu pono ʻia ka mālama wela a me ka hoʻolālā die.
Ka hiki ke hana mīkini
ʻOi aku ka maikaʻi o ka mīkini ʻana i ke kūlana annealed. Hoʻopau pinepine ʻia ka huli nui ʻana, ka wili ʻana, ka ʻeli ʻana a me ka mīkini ʻana ma mua o ka paʻakikī ʻana a me ka hoʻomaʻamaʻa ʻana. Kōkua nā kaola i ʻili ʻia, huli ʻia a i ʻole ka lepo i ka hōʻemi ʻana i ka manawa hoʻomākaukau ma mua o ka mīkini CNC.
Ka Lapaʻau Wela
Hoʻolako pinepine ʻia ʻo 8418 i ka annealed ma mua o ka mīkini ʻana a laila hoʻopaʻakikī ʻia a hoʻomaʻamaʻa ʻia e like me ke koi hope loa o ka mea hana. Pono e koho ʻia ka mālama wela e like me ka nui o ka ʻāpana, ke ʻano make, ka paʻakikī o ka pahuhopu, ka mahana hana a me ka ukana hopena.
Nitriding a me ka mālama ʻana i ka ʻili
Hiki ke hoʻohana ʻia ka Nitriding e hoʻomaikaʻi i ka paʻakikī o ka ʻili a me ke kūpaʻa ʻana i ka ʻaʻahu no nā mea hana hoʻolei make a me nā mea hana extrusion i koho ʻia. Pono e koho ʻia ka mālama ʻana o ka ʻili ma hope o ka noʻonoʻo ʻana i ka paʻakikī o ke kumu, ka hoʻolālā make, ka mahana lawelawe a me ka hohonu o ka hihia i koi ʻia.
No ke aha e koho ai iā SAKY STEEL?
Hiki ke hoʻolako ʻia ke anawaena, ka lōʻihi, ka hoʻopau ʻili a me ka ʻae ʻana o ka mīkini e like me nā kiʻi.
Hiki ke mālama ʻia ka ʻike mea mai ka palapala ʻana a hiki i ka hoʻopili hope ʻana.
Hiki ke hāʻawi ʻia ʻo MTC (Mill Test Certificate / 质保书) e like me ke kauoha kūʻai.
Loaʻa nā palapala EN 10204 3.1 ke kuhikuhi ʻia e ke kauoha.
Hiki ke hoʻonohonoho ʻia ka paʻakikī, ka dimensional, PMI, UT a me ka loiloi microstructure ke kuhikuhi ʻia.
Hiki ke hoʻonohonoho ʻia nā puʻupuʻu, nā hihia lāʻau, nā pallets a me nā māka hoʻouna mea kūʻai aku.
Nā nīnau i nīnau pinepine ʻia
He aha ke kila hana hana wela 8418?
ʻO 8418 kahi kila hana wela Cr-Mo-V kiʻekiʻe-molybdenum i hoʻohana ʻia no nā make hoʻolei make, nā mea hana extrusion, nā make forging wela, nā punch wela, nā mea hoʻokomo a me nā ʻāpana mea hana wela kiʻekiʻe ʻē aʻe.
Ua like anei ʻo 8418 me H13 a i ʻole 8407?
ʻAʻole pono e manaʻo ʻia ke kūlike pololei. Hoʻohālikelike pinepine ʻia ʻo 8418 me nā kila hana wela ʻano H13 / 8407, akā maʻamau he kaulike alloy ʻokoʻa kona, ʻoi aku ka nui o ka molybdenum. Pono e hōʻoia ʻia ke kūlike hope loa e MTC a me nā kikoʻī o ka mea kūʻai aku.
He aha nā polokalamu e hoʻohana ana i ka 8418 round bar?
Hoʻohana ʻia ka ʻaukā poepoe 8418 no nā make hoʻolei make, nā make extrusion, nā make hoʻoheheʻe wela, nā punch wela, nā mandrels, nā cores, nā pine ejector a me nā ʻāpana hana wela e koi ana i ke kūpaʻa luhi wela a me ke kūpaʻa i ka palupalu.
Hiki ke hoʻolako ʻia ka ʻaukā 8418 i wili ʻia a i ʻili ʻia paha?
ʻAe. Hiki ke kūkākūkā ʻia nā ʻili ʻeleʻele, ʻili ʻia, huli ʻia a lepo ʻia e like me ke anawaena, ke ahonui a me ke koi mīkini hope loa. He kūpono nā kaola honua kahi e pono ai ka kaohi ʻana i ke anawaena paʻa a i ʻole ka hoʻomaikaʻi ʻana i ka hoʻopau ʻana o ka ʻili.
He aha ka paʻakikī i hoʻohana ʻia no ke kila kila 8418?
Hoʻolako pinepine ʻia ʻo 8418 i hoʻomehana ʻia no ka mīkini ʻana. Ma hope o ka hoʻopaʻakikī ʻana a me ka hoʻomehana ʻana, koho ʻia ka paʻakikī hana e like me ke ʻano make, ka mahana lawelawe, ka ukana hopena a me ke ola o ka mea hana e pono ai.
Loaʻa anei ka hoʻāʻo ultrasonic no 8418 mau kaola?
Hiki ke hoʻonohonoho ʻia ʻo UT no nā anawaena kūpono o nā pā a me nā pā i hoʻoheheʻe ʻia ke kuhikuhi ʻia. Pono ke kauoha e wehewehe i ke ʻano hoʻāʻo, ka pae ʻae a me ke koi hōʻike.
Hiki ke hoʻolako ʻia ʻo MTC a me EN 10204 3.1?
Hiki iā SAKY STEEL ke hāʻawi i nā palapala MTC a me EN 10204 3.1 e like me ke kauoha kūʻai. Hiki ke hoʻonohonoho ʻia nā hōʻike paʻakikī, dimensional, PMI, UT a i ʻole microstructure ke kuhikuhi ʻia.
