Pae Porowhita Rino Taputapu ASTM A681 H10 DIN 1.2365
Whakaahuatanga Poto:
Ka tukuna e te pae porowhita maitai mahi wera DIN 1.2365 H10 te ātete ki te ngenge wera me te kaha wera mō te hanga i ngā mate hanga me ngā taputapu whakaputa. Kei te wātea te diameter ritenga, te mata, te tapahi, te UT, te MTC me te EN 10204 3.1 ina tohua.
Ko te Pae Porowhita Rino Mahi Wera DIN 1.2365 H10 he maitai taputapu mahi wera chromium-molybdenum-vanadium e tukuna ana hei pae porowhita mō ngā patu wera, ngā mate hanga, ngā taputapu whakaputa, ngā mata kutikuti wera, ngā whakauru mate me ngā wāhanga taputapu pāmahana-teitei. E kiia ana hoki ko AISI H10, UNS T20810, 32CrMoV12-28 me SKD7, i runga i te paerewa me te mākete e tika ana.
Ka tukuna e SAKY STEEL te pae porowhita H10 / 1.2365 i roto i te āhua whakamahana, whakamahana rānei, e ai ki ngā whakaritenga o te ota. Ko te tukatuka e wātea ana ko te tapahi, te tihore, te huri, te huri, te miihini taratara, te tirotiro i ngā āhuatanga, te whakamātautau pakeke, te UT ina tohua, ngā tuhinga MTC me EN 10204 3.1.
Ngā Tawhā Hua
| Taonga | Ngā Taipitopito Hua |
|---|---|
| Ingoa Hua | Pae Porowhita Rino Mahi Wera DIN 1.2365 H10 |
| Tau | H10 / 1.2365 / SKD7 |
| Tohu UNS / EN | UNS T20810 / 32CrMoV12-28 |
| Whānau Rauemi | Te maitai taputapu mahi wera |
| Āhua Hua | Pae porowhita me te pae porowhita hanga |
| Awhe Rahi | Ngā diameters auau me ngā diameters ritenga mā te tono |
| Roa | 1000–6000 mm, tapahia rānei kia rite ki te roa |
| Whakaotinga Mata | Mangu, tihoretia, hurihia, hurihia rānei |
| Āhua Tukunga | Ka whakawerahia, ka whakamahanatia rānei ina tohua |
| Paerewa | ASTM A681 / DIN EN ISO 4957 |
| Manawanui | Mira, h9, h11, tuhi motuhake rānei |
| Ngā Ratonga e Wātea ana | Te tapahi, te tihore, te huri, te huri, te miihini |
| Ngā Tiwhikete | WhM, EN 10204 3.1, purongo ahu |
Te Hanganga Matū
Kua whakaranua te H10 / 1.2365 ki te chromium, te molybdenum me te vanadium hei tautoko i te kaha wera, te pakari, te ātete ki te āhua me te mahi ngenge wera. Ko ngā uara e whai ake nei he awhe tohutoro noa; ka rerekē pea ngā rohe tuturu i runga i te ASTM, DIN, JIS, i ngā whakaritenga rānei a te kiritaki.
| Huānga | Ngā Ihirangi Tohutoro Noa | Mahi Hangarau |
|---|---|---|
| Waro | Tata ki te 0.28–0.45% | Ka whakarato i te pakari me te mārō mahi |
| Hiraka | Tata ki te 0.10–1.25% | Tautoko i te ātete waikura me te tango waikura |
| Manganēhi | Tata ki te 0.15–0.70% | Tautoko ana i te whakapakeketanga me te whakahaere rewa |
| Konupora | Tata ki te 2.70–3.75% | Ka whakapai ake i te kaha wera, te ātete ki te waikura me te pakeketanga |
| Molibdenuma | Tata ki te 2.00–3.00% | Ka whakapai ake i te ātete ki te wera me te kaha ki te wera |
| Vanadium | Tata ki te 0.25–0.75% | Ka whakapai ake i te witi, ā, ka tautoko i te ātete ki te kakahu |
| Whēkau | Te mōrahi whakahaere | He herenga hei tautoko i te pakari |
| Whāriki | Te mōrahi whakahaere | He herenga hei whakawhāiti i ngā whakaurunga |
| Rino | Taurite | Matū whakarewa turanga |
Me whakaū te hanganga matū tuturu e ngā whakatakotoranga hua e tika ana me te MTC.
Ngā Āhuatanga Ā-Mīhini me te Pāmahana-Teitei
Ko ngā āhuatanga hangarau o te pae porowhita H10 e whakawhirinaki ana ki te diameter, te maimoatanga wera, te pāmahana whakamahana, te tūranga whakamātautau me te pakeke mahi. Ko ngā uara e whai ake nei he tohutoro noa mō te matapaki hangarau, ā, e kore e whakakapi i ngā uara MTC motuhake ki te ota.
| Taonga | Tohutoro Noa | Āhua | Te Tikanga o te Hangarau |
|---|---|---|---|
| Te pakeketanga kua whakawerahia | I raro iho i te 229 HB te nuinga o te wā | Kua whakawerahia | Tautoko i te miihini i mua i te whakapakeketanga |
| Te Pakari o te Mahi | Mō te 50–52 HRC tohutoro | I whakapakeketia, i whakamakukutia | He mea noa mō ngā taputapu mahi wera |
| Te Pāmahana Whakamārō | Tata ki te 1010–1050°C | Maimoatanga wera tohutoro | Kei raro i te rahi o te wāhanga me te mana whakahaere o te oumu |
| Awhe Whakamahana | Te tohutoro mō te 450–600°C | I muri i te whakapakeketanga | Ka whakarerekē i te taurite o te mārō me te pakari |
| Te Arahi Wera | Mō te 36 W/m·K tohutoro | Tohutoro pāmahana rūma | Āwhina ki te whakahaere i te ru wera i roto i ngā taputapu |
| Whakawhanuitanga Wera | Tata ki te 12.4 × 10⁻⁶/K te tohutoro | E whakawhirinaki ana ki te pāmahana | He whai hua mō te hoahoa āhuahanga o te mate wera |
| Kiato | Tata ki te 7.8 karamu/cm³ | Te pāmahana rūma | Whakamahia mō te tatau i te taumaha pae |
| Te Whakamahinga Pāmahana-Tiketike | E whakawhirinaki ana ki te tono | Ratonga mahi wera | Ngā pānga o te kawenga, te wā, te whakamatao me te huringa wera |
Ripanga Rahi Noa
| Diameter | Roa | Mata | Te tukatuka | Te Whakamahinga Noa |
|---|---|---|---|---|
| Ø10–30 mm | 1000–6000 mm | Kua tihoretia, kua hurihia rānei | Te tapahi me te huri | Ngā pine, ngā patu wera, ngā taputapu iti |
| Ø35–80 mm | 2000–6000 mm | Kua tihorea, kua hurihia rānei | Tahua mīhini | Ngā mandrel me ngā toki taputapu |
| Ø85–160 mm | Te roa o te tapahi ritenga | Hurihuri rawa | I tapahia, i mīhinihia rānei | Ngā wāhanga mate hanga |
| Ø165–300 mm | Hangaia kia rite ki te tono | I whakapūmautia, ā, i hurihia | UT ina tohua | Ngā taputapu mahi wera nui |
| Neke atu i te Ø300 mm | Kaupapa motuhake | I whakapūmautia, i mīhinitia rānei | Me arotake hangarau | Ngā poraka mate taumaha me ngā whakaurunga |
Whakataurite i ngā Whakatakotoranga Rerekē
Te Whakataurite i te Mata o te Pae Porowhita me te Hanganga
| Āhua | Āhuatanga Matua | Te Whakamahinga i Manakohia | Tohutohu Hoko |
|---|---|---|---|
| Pae Hurihia Wera | Mata mira ōhanga | Te miihini taratara | Tauwhāitihia te tahua miihini |
| Pae Whakarewa | He pai mō ngā wāhanga nunui ake | Ngā taputapu mahi wera taumaha | Ka taea te tono UT |
| Pae Kua Tihoretia | Mata kore-tauine | Mīhini CNC | Ka whakaiti i te whakarite o te mata |
| Pae Tahuri | Te tahua diameter whakahaere | Ngā papa taputapu | Whakaūtia te rahi kua oti |
| Pae Whenua | Te manawanui pakari me te mutunga maeneene | Ngā taputapu tika | Āhua h9, h8, manawanui tuhi rānei |
Te Whakataurite ki ngā Rino Utauta Mahi Wera e Pā Ana
| Tau | Kaha Matua | Te Herenga Whānui | Kōwhiringa Noa |
|---|---|---|---|
| H10 / 1.2365 | Te ngenge wera me te taurite kaha wera | Kāore i te tino kitea i te H13 | Ngā patu wera, ngā mandrel, ngā mate hanga |
| H11 / 1.2343 | He pakari pai me te ātete ki te wera | He iti ake te ātete ki te kakahu i ētahi atu huarahi kē atu | Ngā taputapu whakarewa me ngā taputapu mahi wera |
| H13 / 1.2344 | He maitai mahi wera e whakamahia whānuitia ana | Te taurite koranu rerekē me te maimoatanga wera | Ngā taputapu whakarewa mate me te whakaputanga whānui |
| H21 / 1.2581 | Te pakeke wera teitei o te tungsten | He nui ake te utu me te rerekētanga o te kaha miihini | Ngā taputapu mahi wera wera motuhake |
Ngā Paerewa ōrite me ngā Ingoa o te Ao
| Pūnaha | Whakatūnga | Te whanaungatanga |
|---|---|---|
| AISI / ASTM | H10 | Te kounga maitai taputapu mahi wera noa |
| UNS | T20810 | Te tohu UNS mō te maitai momo H10 |
| DIN / W.Nr. | 1.2365 | Tau rauemi Tiamana noa |
| Ingoa EN | 32CrMoV12-28 | Te tohu matū noa o Ūropi |
| JIS | SKD7 | Tohutoro whakawhiti noa i te reo Hapanihi |
| Paerewa Hua | ASTM A681 / DIN EN ISO 4957 | Ngā tohutoro whakatakotoranga maitai taputapu |
Rere o te Tukanga Whakaputa
Ka tīpakohia ngā rauemi whakarewa i runga anō i te matū H10 e hiahiatia ana.
Ka whakahaerehia te matū, te ma me ngā huānga toenga i te wā e rewa ana.
Kua rite te kounga o te ingot, o te pireti rānei mō te mahi wera.
Ka whakawhāititia te rauemi hei pae porowhita, hei pae hanga rānei.
Ka pai ake te mahi miihini i mua i te hanga taputapu whakamutunga mā te whakamahana.
Ka taea te tihore i ngā pae, te huri, te huri, te tapatapahi rānei kia rite ki te rahi.
Ka tirohia ngā ine, te mata, te mārō me ngā tuhinga.
Kua whakaritea te tohu tau-wera me te tākai kaweake.
Tirotiro Hua
| Tirotiro | Tikanga | Kaupapa |
|---|---|---|
| Tātari Matū | Te tātari taiwhanga, te arotake MTC rānei | Whakaū i te matū H10 / 1.2365 |
| PMI | Te tautuhi rauemi pai | E wātea ana ina tohua; ehara i te mea hei whakakapi mō te matū katoa |
| Whakamātautau Pakari | Whakamātautau HB, HRC rānei e tika ana | Whakaūtia te āhua kua whakamahanatia, kua tukatukahia rānei |
| Tirotiro Ahu | Te matawai i te caliper, te micrometer me te roa | Manatokohia te whānui, te roa me te manawanui |
| Tirotiro Mata | Arotake tirohanga me te whakaotinga | Tirohia ngā kapiti, te unahi, ngā takahuri, ngā pakaru rānei |
| Whakamātautau Ultrasonic | UT ina tohua | Aromatawai i te pakari o roto i ngā rahi e tika ana |
| Arotake Aroturuki | Te manatoko i te tau wera me te tapanga | Honoa te hua ki te MTC me te EN 10204 3.1 |
| Tirotiro a te Rōpū Tuatoru | SGS, BV, TÜV, kaitirotiro rānei kua tohua | Ka taea te whakarite ina whakaritea |
Tākai Hua
Ka taea te tiaki i ngā pae ki te hinu, ki te pepa VCI, ki te kiriata, ki te takai ā-wai rānei.
Ka whakaitihia te nekehanga me te rakuraku e ngā whitiki rino, ngā wehewehe me ngā whakakī.
Ka taea e ngā pae whenua, ngā pae mīhini rānei te whiwhi taupoki pito, te tiaki whakakī rānei.
Ka tīpakohia te tākai kaweake kia rite ki te whānui o te pae, te roa me te taumaha.
Ka taea te pupuri i te tohu, te rahi, te tau wera me ngā tohu tuku a te kiritaki.
Ngā Taupānga, Te Mahi Matua me te Hanganga
Ngā Taupānga Matua
- Ngā mate hanga wera me ngā whakauru mate
- Ngā patu wera, ngā mandrel me ngā kaipupuri patu
- Ngā taputapu whakaputa me ngā poraka rūpahu
- Ngā mata kutikuti wera me ngā mate hopu
- Ngā mate pane me ngā taputapu hanga wera
- Ngā taputapu whakarewa mate konumohe me te kore-whakarewa, ina tika
Mahi Mahana-Tiketike
E whai hua ana te H10 mō tōna ātete ki te whakangawari, te ngenge wera me te ru wera auau i roto i ngā taputapu mahi wera. Ko te roa o te mahi e whakawhirinaki ana ki te kounga o te maimoatanga wera, te hoahoa o te mate, te mahi whakamahana i mua, te whakahinuhinu, te tikanga whakamatao me te kaha o te huringa wera.
Te āheinga ki te mīhini
He pai te ngāwari o te miihini i roto i te āhua whakamahana. Ko te tikanga, me whakaoti te hurihanga nui, te keri, te mira me te miihini taratara i mua i te whakapakeketanga me te whakamahana. E taunakihia ana ngā pae whenua ina hiahiatia he ātete ki te diameter kiato, he whakapai ake rānei i te mata.
Te Maimoatanga Wera
Ko te tikanga ka whakamahanahia te H10 i mua i te miihini, kātahi ka whakapakeketia, ka whakamahanahia ki te pakeketanga mahi e hiahiatia ana. Me whiriwhiri ngā tawhā whakapakeketanga, tineitanga me te whakamahana kia rite ki te rahi o te wāhanga, te whakahaere oumu, te āhua o te mate me te pakeketanga ūnga. Me karo i te tango waro nui rawa i te wā e whakamahanahia ana.
Te whakarewa me te whakatika
Tērā pea ka taea te whakatika i te whakarewa mā te whakamahi i tētahi tikanga whai tohu, te whakarewa whakakī e tika ana, te whakamahana i mua me te maimoatanga wera i muri i te whakarewatanga. Mō ngā mate tino nui, me hangai te whakaaetanga whakarewa ki te hoahoa taputapu, te pāmahana mahi, te whakaritenga pakeke me te aromatawai mōrearea pakaru.
He aha i whiriwhiri ai i a SAKY STEEL?
Ka taea te tuku i te diameter, te roa, te mata me te tahua miihini kia rite ki ngā tuhi.
Ka taea te pupuri i te tautuhi rauemi mai i te tuhinga tae noa ki te tākai whakamutunga.
Ka taea te whakarato i te MTC (Mill Test Certificate / 质保书) e ai ki te ota hoko.
Kei te wātea ngā tuhinga EN 10204 3.1 ina tohua i roto i te ota.
Ka taea te whakarite i te mārō, te whānuitanga, te tirotiro PMI me te UT ina tohua.
Ka taea te whakarite i ngā paihere, ngā pouaka rakau, ngā papa me ngā tohu tuku kiritaki.
Ngā Pātai Auau
He aha te maitai taputapu DIN 1.2365 H10?
Ko te DIN 1.2365, e mōhiotia ana ko H10, UNS T20810 rānei, he maitai taputapu mahi wera chromium-molybdenum-vanadium. E whakamahia ana mō ngā taputapu e pāngia ana e te pāmahana teitei, te pānga me te huringa wera auau.
He aha te paerewa e pā ana ki te pae porowhita H10?
Ko te ASTM A681 te mea e whakamahia whānuitia ana mō te maitai taputapu H10, ko te DIN EN ISO 4957 ia e whakamahia whānuitia ana mō te 1.2365 / 32CrMoV12-28. Me tohu i te ota whakamutunga te paerewa me te whakatikatika e hiahiatia ana.
He aha te pakeke ka taea te whakatutuki i te maitai taputapu H10?
Ko te H10 kua whakawerahia ka tukuna i raro iho i te 229 HB kia māmā ai te whakamahi. I muri i te whakapakeketanga me te whakamātaotanga e tika ana, ka tīpakohia te pakeke mahi i te 50–52 HRC, me te whakamahi me te whakamahana.
Ka taea te tuku i te pae porowhita H10 kua hurihia, kua tihorea rānei?
Āe. Ka taea te matapaki i ngā mata pango, ngā mata kua tihoretia, ngā mata kua hurihia me ngā mata kua hurihia kia rite ki te whānui, te manawanui me ngā whakaritenga miihini whakamutunga. He pai ngā pae whenua mō te whakahaere whānui kia kaha ake.
He pai te H10 mō ngā mate hanga wera?
E whakamahia whānuitia ana te H10 mō ngā mate hanga wera, ngā mandrel, ngā patu wera me ngā taputapu e pā ana. Ko te pai o te mahi ka whakawhirinaki ki te hoahoa o ngā mate, te pāmahana mahi, te mahi whakamatao, te pakeke me te kawenga mahi e tumanakohia ana.
Kei te wātea te whakamātautau ultrasonic mō ngā pae H10?
Ka taea te whakarite i te UT mō ngā diameter pae e tika ana me ngā pae hanga ina tohua. Me tautuhi te ota hoko i te tikanga whakamātautau, te taumata whakaae me te whakaritenga pūrongo.
Ka taea te whakarato i te MTC me te EN 10204 3.1?
Ka taea e SAKY STEEL te whakarato i ngā tuhinga MTC me EN 10204 3.1 e ai ki te ota. Ka taea hoki te whakarite i ngā pūrongo mō te pakeke, te whānuitanga, te PMI, te UT rānei ina tohua.
